Search results

I agree. I've been running TM's version for the past few days and it's fantastic. I was just curious as to why a safestrap compatible version of AOSP was available on bl locked phones in the past, but not on our S5?

So I've been researching the great scales of the Internet for anything that would allow us to have ANY form of AOSP on this carrier locked POS. Not just a themed version of TW but legit. I've seen on the S4 that there were safestrap compatible versions. I was wondering what had happened to the...

I've read around the forums that the G900F firmware can be flashed onto a G900A handset without issues. I think I may have even done it myself after I bricked once. (Don't remember because I was freaking the f out downloading everything haha). So I guess the question is: is it possible to flash...

It's been awhile since I've posted to the forums, but this ROM gave me reason to come back from the dead. In short...it's amazing. By far the most fluid and seamless I've installed. I'm running GPE and I have battery life that far exceeds what I've been getting anywhere else. The ASOP UI mod...

On your edit, so essentially an executeable safestrap? My thought would be that the kernel would be difficult to compile. However, my experience in the subject is rather limited at best. Oversimplification is great to get everyone one the same page of possibility. The main purpose of this thread...

As we saw back in January, an individual had been able to crack the secure boot to allow a Mac OS to successfully run on an RT...no tutorial released. I own an RT, so this information was extremely appealing. I was hoping an android method would be released sometime soon but nothing ever came of...

Yeah this method bricked my phone. I had to go back to stock through RSD, and lost root access. The good news is it was so easy to reacquire root thanks to Dan Rosenberg's programs.

(bootloader) Variable not supported! target reported max download size of 31457280 bytes Invalid sparse file format at header magi sending sparse 'modem' (28172 KB)... OKAY [ 2.430s] writing 'modem'... (bootloader) Unknown chunk type FAILED (remote failure) finished. total time: 3.720s Oooooh...

Fixed ;)

Not really neccessary anymore...vendor files were updated with latest sync. Fixed my issue and wasted a few days of my time :/

4.2.2 AOSP Sources finished dropping today! http://www.androidpolice.com/2013/02/12/android-4-2-2-build-jdq39-source-has-started-pushing-to-aosp/ No SGS3 yet, but I'm sure the Devs are already working on it ;)

I figured it out lol. Thanks :) As far as I can tell, from everything I use daily, this rom is great. It's snappy, smooth, and responsive. Minor bugs I've noticed already are: System UI fc's on boot (tested 3 times...minimal error, restarts immediately) SetupWizard fc's (randomly pops up)...

Anyone having issues with PIE controls? Its not working for me...

Hell yeah! Checking it out now :)

It's all good man...just frustrating. I've worked out sooo many kinks but this one has me stumped. The logs are gone and it takes 90 min to even get to that point during the build. I added device configurations to the vendor files. The ones giving me trouble are the resources in the vendor...

So you just looked at the OP and posted without reading any of the thread? Thats helpful :good:

You basically just paraphrased what I said in the previous post. I told you the steps I took to correct the error. Did it work? No....

Way to ruin my dream :/

This is great news considering Ubuntu is already being compiled for ARM devices. e.g. Their new mobile operating system. Once it drops, it should only be a matter of time before someone cooks it up for the RT... :fingers-crossed:

NNNNNOOOOOOOOOoooooooooo!!!!!!!!:crying:

Will it work on the RT?

Well, Gary...First off, thank you for responding. I understand the confusion as this is a dual device thread. I'm working on the SGS 3 (d2att). I figured my message was pretty much self explanatory as to the issue I'm having. When I stated trying to "build" a rom. I figured that would mean...

Trying to build a rom, and keep getting an error stating "Resources appear in overlay but not in base. Use <add-resource> to add." Where do I add the resource? Noob question but I'm doing my best to learn, and have come a long way without any help. Any advice is appreciated :fingers-crossed:

Hate to be the bearer of bad news...but this happened to me not too long ago. AT&T did a diagnostic on my phone and the sim connector was screwy. I had to send it in for repairs. :(

Had the exact same issue a few months ago. Flashed a lot of roms fix, but to no avail...ATT did diagnostic check and my Sim card connector was screwy...had to send it in for repairs :(

Figured it was something out of our control...Shame too, this was a bada** addition to the rom. Thanks

Animation Manager It seems that nobody is having my issues with this, so post time :) First off, fantastic rom! I'm also amazed with the feedback from the devs. Now down to business, Everytime I select a window or keyboard animation, it builds the zip, attempts to flash, and fails. Something...

I am suffering from a serious issue. My A2 keeps hotbooting when I don't have service. Im on ICS with Swiftytricks rom. My signal will randomly drop, and im in a great service area. Once that happens I switch to airplane mode to try and reset my radio. The only issue is that it wont return to...

On second thought, im just going to go back to SCV7....this thing still has a lot to work out before I'll install it as a daily driver. I appreciate your help though :)

I'll try it :good:

sounds great..getting sick of this mod already though. Bootloops are crazy rampant. lol

Sure did...directly off cyanogen's wiki. :/

This rom works amazingly...until I flashed CM10 GApps. Now Im stuck in a bootloop abyss. I got out of it, but id really like GApps...any suggestions?

That's the issue i'm having. I OC'd the CPU and GPU with the help of rdavisct's SCv7 post. I figured i'd be good with that. Then, sharingan92, comes out of left field with his "manual" 1.4 ghz OC statement. Looked everywhere for how to modify my OC scripts. The method you have isn't proven with...

Any input on best configuration to the Atrix 2? OS: Froyo, GB, ICS leak? With what modifications? I'm running ICS SCv7 OC'd 1.2 ghz and with that I'm Benchmarked at 6097. However, I'm seeing the Atrix 2 with Benchmarks at 63XX to 65XX. Just trying to get an idea of how to raise it.