Search results

OTA may or may not be the replacement of full rom. OTA verifies if you are on original rom and locked bootloader. Try full stock dump + OTA, blend it and you might be able to build.

Hey When did you get this update? The last one was 2.22.707.4 right? By the way do you clean your device fully before taking nand backup? Is this OTA?

Basebands? 3G at 2100MHz Hi All, I am using this phone in India, unlocked. I see that, I cannot use 3G on this phone as in India 3G uses 2100 MHz. Recently I understood that the phone only have 850/1700/1900 baseband support. Just wanted to check with you guys that, this limitation is set in...

Thank you.. I'll try that app... Just wanted to know from community that is this can be a hardware problem, if I am not getting 3G connection??

My baseband version is UKVJ1.. I have got my phone unlocked after i purchased.. I doubt that the unlock will go away if i upgrade the baseband.. I have never tried 3G on stock rom, but i remember it wasn't working on CM 10 too.. Is it possible that HSPDA hardware isn't functioning?? But if...

2G/3G/4G Is 2G and 3G connection working fine?? I am only getting 2G connection on the phone, where as I have active 3G plan. I have set my preferred network type to 3G and have all setting correct, but still I am only getting 2G connection Anyone else faced this issue or is that my hardware...

OTG? Does our phone support OTG??? Anybody ever tried?? I don't have cable so just asking with community.. :)

Just to clarify... kernel with 16/1 build -- I was getting FC for all the process. So on top of that I installed the Kernel shared in op of cars link: http://forum.xda-developers.com/showpost.php?p=49196706&postcount=3 With this i am not getting FCs. But observed that the internal SD is not...

Cars - CM11 Kernel have a problem i, CM11 Kernel have a problem, it is not mounting internal SD card. I am using jbfs 16-Jan-14 build and I was facing FCs sometime. Later I applied cars CM11 kernel sahred in op, After which my internal sd card is not getting mount. Anybody else faced this...

CM11 Kernel have problem Hi, CM11 Kernel have a problem, it is not mounting internal SD card. I am using jbfs 16-Jan-14 build and I was facing FCs sometime. Later I applied cars CM11 kernel sahred in op, After which my internal sd card is not getting mount. Anybody else faced this issue???

From where you got cm11 kernel from cars1189?? link plz..

Make the build as developer build and adb will be enabled automaticaly..

Seems boot.img in CWM and TWRP is not rooted. I tried rebooting to recovery from CWM 6.0.4.6 and it says the device required to be rooted.

The freezing and crashes happens after I install Pa_Gapps..

Strange but till now I am not able to install single build cleanly.. I bought this phone in July 2012 and got it unlocked. By baseband version is T679UVKJ1. Is that the loading script is not clean the partition properly or the partition table details are different in different release of the phone.

My phone is career unlocked. if I apply the above baseband, will it be locked again.

The UI crashes after installing gapps on base rom. Anyone else face the same?

tun.ko modules Can we have tun.ko module for our device? Anyconnect vpn isn't working without it.

How to add this? Hi I also want to apply this fix on my phone, but the emergency number is different in our country. Can you please let me know how to do that change and apply it. In my country emergency numbers are 100, 101, 102 etc.

Why the R2.2 link and R2.3 link are same??? also R2.3 link leads me to R2.2 only

dialpad problem Hi, While on call, if we use dialpad and key in numbers, though in UI key in numbers displays correct but internal it is sent wrong.. sometime repeated. anybody faced this issue? any fixes to be applied? UPDATE: I put a new theme, with that the problem is not reproducible...

Thanks i found that work around... NO permanent solution yet? cauz the lights are on always until i lock the screen... I hope it won't harm the hardware cauz i keep the screen on for longer period..

Led lights? Any work around for LED lights? The rom is really great and I just love it...

any solution yet?? Me too facing the similar issue.. my exhibit-2 is unlocked, so i was wondering if that could be the issue.. but seems it is not. Share with me if u managed to get some solution.

Thank you.... Thanx for taking this up Arjen.. hope to see a positive response..

Away!!! I am off from development for sometime.. @All: have some patience, and forgive for not yet able to deliver the new recovery... Need more time!!!!....

I am alive friends.. Just little busy.. and praying got to give 25 hours a day LOL!!!! He haven't shared anything to me...... so the state of CM7 is same..

I'll look into it.. personal lappy is not with me currently.. so will take time to compile the recovery..

Get it from my signature....

I knw tht.... Hmm i knw tht ultimate flasher.... AROMA.... hehehehehehe :D jst creating more suspense and excitement...

In hunt of a new A60 boot.img.. i already mentioned that the offsets are different in latest device.... bt one thing still not clear to me is, y d heck it depends on offsets?? recovery just depends on the partition label... I am quite busy in other projects.. bt i'll surely make time for...

I already did.. but varun dont' want.. LOL!! I already shared the stock flasher with rom... :D

entire andorid source code of select release... gingerbread or ICS etc... when i did.. ubuntu ate 16GB and later this source code ate almost 14GB arnd

Gr88 dude share it plz... v'll see wat further can be done...

Furios gold have unlocked N720 U know guys... Furious gold team had successfully unlocked the N720 phones.. it's not IMEI lock.. it's change in code... For that we need to purchase a Fursious gold dongle.. LOL!!! the update software is already with me.. but not the dongle.... Not willing to...

Dude u have to download, aprrox. 14GB of source code and u hv to setup Ubuntu for that.. then u hv to setup config boards for the device and build the recovery.. would u like to do that?????

Gr88 work...

Dude plz use the recovery available here This is the one meant for our A60.. it doesn't matter if u hv kernel .29 or .32. Claro cwm5 recovery with A60 isn't working.. people hv reported problem.. that recovery is meant for Claro N720 phone users not for A60... I am personally using the eclair...

download again frm the same link and install... only cache will not be backed up

New link posted on first thread of recovery again... i tried to skip the cache partition.. only drawback is, after restore first boot might be little slow.. someone please test... ---------- Post added at 03:50 PM ---------- Previous post was at 03:46 PM ---------- LOL!! i m using it frm...

New link posted on first thread again... i tried to skip the cache partition.. only drawback is, after restore first boot might be little slow.. someone please test....

What's d kernel version it shows on ur phone.. and plz don't try to customize ur phone unless we extract a boot.img from ur phone... If your phone is getting detect in pc with adb on... use romdump to dump ur boot.img from phone... see the first post of the thread for instruction... get back...

Got another idea... I think i should do another tweak here.. will post back sooner by evening... If anyone online now jst leave a msg on thread...

Claro rom using A60.. then go with cwm v5 (eclair) posted on first post... (if the phone bought earlier, not in 2012). for 2012 i m still in need of a proper boot.img dump... plz use rom dump......

By d way, r u a claro user or a A60 user????

That is for claro user.. we should use the one available.. works fine.. for claro users the partition offset is different so that will only for them....

check again first page first post.. recovery thread created by me not this thread

Good work dude.. hope freshers will utilize this thread... One request.. where ever u r mentioning the downloads.. please mention the Thread link and not the direct download link.... for example for the recovery u can post the thread link instead the recovery link.. This will help the user and...

Dude u must have shared that thr is a new phone available... don't knw y people forget to read signatures... anyways... adi claim to have latest boot.img posted HERE download in flash this boot.img to get ur phone up and running.. i doubt if the old boot.img available in a60-full zip uploaded...

Recovery posted for new A60 I have posted a recovery on first page of the thread.. someone test and let me know... Recovery is based on latest boot.img posted by adi_2012...