Search results

Follow this guide: https://forum.xda-developers.com/apps/magisk/magisk-google-pay-gms-17-1-22-pie-t3929950

This is the thread you need to see. I've followed these steps and my google pay works https://forum.xda-developers.com/apps/magisk/magisk-google-pay-gms-17-1-22-pie-t3929950

I don't know what I did but it seems to be fixed. I'd put it away in a drawer after I didn't get a response for a week. Pulled it out last night to try your suggestion and it booted up to the main screen. In the process of upgrading to rbox's latest version. Thank you mighty internet wizard

bump in case anyone has ever seen this kind of issue happen

Thank you for this! It helped me remove a module that was causing issues with the December update

Picked up a super cheap Gen 1 FireTV from a yard sale but I think someone was tinkering with it and messed something up. Plugging it into to HDMI it gets stuck at the white Amazon logo (with black background), will not go further. Remote control and keyboard commands to reboot or go to recovery...

For anyone who reads this and has the same issue: I had to run the flash-all.bat from latest factory imagine with the included -w flag (which completely wipes and reinstalls Android 10). No idea why the wipe was needed but I was able to follow the root process without issue after doing that.

have tried the fastboot flash boot --slot all magisk_patched.img Have confirmed MD5 is the same, even tried your magisk_patched.img Stays stuck at the G loading for a bit, reboots. Does this a couple times then returns to fastboot mode. At the very bottom it says Enter reason: no valid slot to...

Trying to root but I keep getting stuck at the G logo with the loading bar below. Here are the steps I'm taking: On latest version of Android Q Extracted boot.img from crosshatch-qp1a.190711.020.c3-factory-59b11ce9 on PC Transferred boot.img from PC to Pixel 3xl Open Magisk 7.3.4-578a50b4...

Fresh install of Official Lineage OS nightly 6/26/19, micro gapps, latest magisk. Having an issues where I cannot set Voice Match to turn on nor am I able to use the "Ok Google" command from any screen. Settings->Security->Smart Lock->Voice Match. I flip the switch for "Access with Voice...

Honestly, I think this was a genius idea. Forces everyone to be on the same page. Me, I was too dumb too check the Q&A and had a hell of a time figuring out where I messed up. Finally on 5/1 and everything is running smoothly. Sent from my LG-D800 using XDA Premium 4 mobile app

I installed the bottom link (with CM11 in the title), working beautifully Sent from my LG-D800 using XDA Premium 4 mobile app

Would you happen to have a link to that? Search is failing me

Itshappening.gif Sent from my LG-D800 using XDA Premium 4 mobile app

1/27, even though you said to disregard.

Everything seems to be working well on my D800 Sent from my LG-D800 using XDA Premium 4 mobile app

There is no kernel, only Zuul.

Yup, you all called it. Installs just fine on 2.6.3.3. Thank you for your help!

I've had an issue installing both 1/17 and 1/20. On my D800 with TWRP 2.6.3.4 I get the error "This package is for "g2, d800, galbi" devices. 1/15 and prior have always installed with no issue

A+ for effort

You're doing god's work son. Running the debug2 on my D800. Everything looks to be running smoothly, thanks for your work!

Having the same issue on my LG G2 running PA4.0 http://i.imgur.com/HywS828.png

paid up!

In for $30 Sent from my Nexus 7 using XDA Premium HD app

I tried the steps in the link above (save for reinstalling stock, gps works perfectly in Slimbean) and still no go. I'd donate $10 if someone can get it working

Same on my D800. So far as I can tell the AOKP port is perfect save for this.

It'll will be after 9am EST before I can report the results, but I will get on this ASAP. Edit: for the record, I really do appreciate all the hard work you've put in. Your ROM kicks ass and save for these tiny hiccups, I've had zero issues!

even weirder, I got 2 mms during the catlog. the one i sent to myself came through, the one someone else sent didnt. https://dl.dropboxusercontent.com/u/52578/2013-11-01-02-41-18.txt too large to post directly on the forums

Doing right now. Makes zero sense to me either.

Just did a clean flash of 1.3, unable to receive MMS (on ATT). I'd done a dirty flash of 1.3 over 1.1 (that i'd also done the mms/tether fix) and everything worked fine. Decided to do a clean flash of 1.3 just for the hell of it, and now MMS isnt receiving. Sending is no issue.

Running 10/15 nightly as well, no issues. Ran the color fix after installing everything, might solve some problems.

I'm having an issue on the 6/6 release. Clean install, but when I set my UI to the phone settings (navbar on the right instead of botton) in landscape mode all three buttons are squished at the very top and barely able to be seen/used. Link: http://i.imgur.com/HBQTOcN.png The red circle is...

This is the piece I had to buy to replace my broken/non charging usb port. It looks like the i777 and the i9100 are identical, but I make no guarantees http://www.cellphonerepairshop.com/samsung-i777-charge-port-pcb-board-with-flex-cable/ Sent from my SGH-I777 using xda premium

I woke up this morning to watch something on Hulu+ and I found my N7 is stuck in portrait mode. Im using Apex as my launcher and it won't go into landscape mode either. I've double and triple checked my autorotate settings and they aren't locked. Ive seen people use the Compass and GPS Status...

I had to replace the usb port on my i777 and ordered this piece. Easy install, took me maybe 10 minutes total. http://cellphone-repair-shop.com/samsung-i777-charge-port-pcb-board-with-flex-cable/

Here in the next week or so, I predict this thread is going to pass 2 million views.

So far, everything seems to be working well except for when a program like SwiftKey3 setup tries to open up the settings/input settings, then I get a FC.

you are correct.

5sj67569x52087142

[deleted]-

[deleted]-

[deleted]-

[deleted]-

Thank you for your help, but I guess I should have clarified something in my original post. I can't get any computer to recognize the phone. If it weren't for the fact that the dock and usb jib are recognized, I'd think the usb port was completely dead. I thought it might be the rom/kernel I'm...

I got my GSII on launch day and here in the past couple days my phone won't charge. I can put it in the dock and it goes into carmode and if I have the jig it it will recognize it when i reboot into download mode. Is there anything I can do to fix it? AT&T wants me to take it to a corp store...

This is a complete and utter long shot, but does anyone have a spare battery I could borrow? I'm leaving on a long trip tomorrow morning and I'd really like to have my phone with me. I put my phone on charge last night and woke up to it not turning on. I've tried different chargers, different...

Sent from my SAMSUNG-SGH-I777 using xda premium

I searched the thread but didn't see anything. If I'm on Cognition 777, would I need to do a full wipe before coming to Unnamed or would a cache/dalvik cache wipe be sufficient? Sent from my SAMSUNG-SGH-I777 using xda premium

Did a second complete wipe and installed r2, the PIN lock feature and it looks like the alphanumeric password feature are both broken. The 3x3 matrix lock seems to work though. Here's hoping designgears or someone else knows a fix :/

Is anyone else having issues with being able to set a lock screen pin? I did a complete wipe from Beta 4 to r2, try to set up my PIN in the location/security screen but it's almost like it doesn't want to "remember" it.