Search results

Hi THX for this great idea ! I am on S10 with Pie 6.2. it works from within your app. 1 In tasker the command is only executed when I reenter the tasker action and go into the config/edit screen... after about 1s on the edit screen .. the screen goes dark from the "input keyevent POWER" 2...

Alternatives - How to remove Carrier Lock Hi there: Could you guys please give me some hints on that: https://forum.xda-developers.com/galaxy-s8/help/sm-g950f-d-alternatives-to-remove-t3945616

I hope you guys can enlight me/us ;). My S8 right now is on: G950FXXU3CRGH_G950FOXM3CRGH I used COMBINATION_FA70_G950FXXU3ARG1_CL12792727_QB18998288_REV00_user_mid_noship to switch to ATO, which is open Austria. Now it shows ATO/ATO/MOB. So still carrier locked to MOB (A1 Austria) Methods for...

Hi I am looking for EFS Partition.Mine is an S8 G950FXXU3 not rooted yet.

OK, I found that every combination firmware can be used aslong as it has the same bootloader as the original firmware that was installed before. I switchted to ATO. which is open Austria. Now it shows ATO/ATO/MOB. So still locked to MOB (A1 Austria) Of course I also read that this guide...

OK, I found that every combination firmware can be used aslong as it has the same bootloader as the original firmware that was installed before. I switchted to ATO. which is open Austria. Now it shows ATO/ATO/MOB. So still locked to MOB (A1 Austria) Of course I also read that this guide...

THX to the OP and supporters around here ! I installed G950FXXU3CRGH_CL14023573_QB19093103. Now my CSC is: XEU/XEU/MOB Can I use any combination File starting with G950FXXU3 or must it be more specific ? What is the least / minimum requirement that must fit? - like must only the...

THX to the OP and supporters around here ! I installed G950FXXU3CRGH_CL14023573_QB19093103. Now my CSC is: XEU/XEU/MOB Can I use any combination File starting with G950FXXU3 or must it be more specific ? What is the least / minimum requirement that must fit? - like must only the...

I thought Knox will be tripped if any form of non - samsung signed firmware flashed on to it e.g. TWRP, Magisk, custom rom, ... 1 So please confirm that you flashed ROM, TWRP and / or Magisk without tripping Knox. 2 Please tell more about this "custom kernel". From where is it or did you...

THX for your fast reply. 1 Is it possible to downgrade to Oreo by flashing all OREO packages except BL to keep BL V5 from PIE (maybe with Odin3_v3.13.1_3B_PatcheD) ? 2 That was what I expected, but what ment Ruturaj Kadam wihth his statement then ?

!!! THX to OP and suppprters like spawnlives and benjamen50 who help us out here !!! I last rootet a Galaxy A5 3 years ago on Android4.4.4. ;) So sorry for my knowledge beeing a bit outdated ;) We have two 950F: 1st is on Oreo: G950FXXU3CRGH 2nd is on Pie: G950FXXU4DSDA 1 From what I read...

That is why I asked which functions are effected when the lib is not present ;) From what I have tested 3D worked without the lib. Only 3D 360 does not work ... no matter wether I placed the .so files to /system/lib or system/vendor/lib (644)

tried that before and it works without them as well

give me an idea how I can test if the lib files work ... and I will try to put them in /system/lib

I have stock recovery (so this wont work I guess). I use the flashfire app which installs the zip but without placing the apk anywhere ... this is why i went "manual" ;--) ---------- Post added at 15:09 ---------- Previous post was at 15:06 ---------- THX, but if I put the apk like you...

THX, but if I put the apk in the Youtube subfolder YT is gone ... so it is different on 4.4.4. ---------- Post added at 14:15 ---------- Previous post was at 14:09 ---------- Good idea ;) but I found a lib folder direct under /system/lib/ but the names dont correspond to the apk names under...

On 4.4.4 the youtube-apk is in /system/apk/ ... Can sombody pls tell me if the lib folder must be put as /system/apk/lib or /system/apk/YouTube/lib

sign in error - rooted version 4.4.4, rooted Samsung A5 THX for the work done here !!! First I tried non root version and MicroG ... worked like a charme. I uninstalled and tried the latest rooted Version. YoutubeVanced_13.28.54-1328542300_API17(armeabi-v7a)(nodpi)(vBlack-v1.2.0) As I have...

deleted

intent to force reconnect to GCM I am on 4.4, rooted and use llama (similar to tasker). I only enable "mobile data" once per hour for 2 minutes.... The problem is, that even when I enable data GCM does not reconnect immediately but instead waits for eg. 14 min. before retrying to connect ...

What I found out so far: android_id: *#*#8255#*#* /data/data/com.android.providers.settings/databases/settings.db its name in the database is android_id, value is HEX gsf id: *#*#GCM#*#* /data/data/com.google.android.gsf.gservices/databases/gservices.db its name in the database is android_id...

sm-a500fu, rooted, 4.4.4 My wife got a new sm-a500fu like our daugther has. To save work (after rooting) I restored the data and systems partitions (with Flashfire) of my daughters a5. I deleted all my duaghters accounts and logged into google with my wifes account. Still both phones have the...

THX for your reply. 1 save & load governors: It looks if one just loads a governor without editing any settings, you dont store the gov. settings in the at_prefs.db. So after the next boot the settings are gone. File interactive.my (saved settings in governor tab interactive)...

I guess the above has something to do with a Titanium restore I did... Another prob. I have: If I save a governor the IO_busy parameter is saved as 1, though the tab displays 0. Also after a reboot it is changed to 1.

Hi, I adjusted the "target_loads" of the interactive govenor. But after boot (pop up "on boot profile set) the interactive gov alway runs with its old settings. If I press reset on the gov. tab it brings up my new settings.... What am I doing wrong ?

THX for reply ! My daughters tablet only has Wifi (no gsm like her smartphone). So she does not use it very often and then she forgets to shut it down. I didnt want to use llama or tasker for that reason and your toolbox (which we like very much ;) is installed already...

Hi, is there any way in 3c to auto shutdown the device after "screen off plus e.g. 30 minutes" ? device is rooted under 4.4.2

del

A1-840fhd 4.4.2 Dear all please help the novice ;) IAFW: 7.0030, Kernel:3.10.20+ Image: Acer_AV0K1_A1-840FHD_RV0MRC02_WW_GEN1 Build: Acer_AV0K1_A1-840FHD_1.042.00_WW_GEN1 1 Is there an update to Android 4.4.4 ? 1a If so ... whats the name of the 4.4.4. stock image ?? 2 Is it worth it -...

deleted

[OUT] error during restore (I restored all suggested partitions) of data partition flashfire brings a lot of [OUT] _123456789.png messages. (123456789 is just an example) What do they mean /consequences ? Can I still use this backup ?

v7 as always THX for your time and patience !!!! In the first post you suggest I did that, but what about 1 com.oasisfeng.greenify/.cleanerService In general: Usally I only block WAKELOCKS if they show up in bat. stats. What about ALARMS. Should one block the above alarms even if they dont...

THX for your fast response. I understand there is no way with stock ROM except to stick with old gmail 4.5.2.

noob questions ;) I am on galaxy A5 rooted 4.4.4. Please help me understanding how it works.... Up till now I used black themed gmail 4.5.2. If I want a newer version I think I have to use a "Theme Ready" apk and the right theme. What are the steps to be done ? What gmail apk should I use: a)...

nop

AlarmService#updateNtp, Config Service fetch, gms/.config.ConfigFetchService, AudioIn a) Please give an idea on what would be the consequences of limiting the following (besides of power savings) 1 AlarmService#updateNtp____________________limiting to 15 minutes (the time I set for all...

erase

delete

could you please reupload it

will it break them or just delay according to the time set ? and what the difference between GCM_CONN and GCM_CONN_ALARM ?

delete

Can GCM_CONN_ALARM be limited like the other location wakelocks ... I have them on 10 minutes (900 in Amplify) ? I ask because the Amplify list says that the other wakelock named GCM_CONN should not be limited

wakelock GCM_CONN_ALARM 1 I do not mean GCM_CONN (without Alram ending !) I did not find it in Amplifies list. Is it safe to have it on e.g. 10 minutes like the other location wakelocks (NlpCollector,...) ? 2 What is the difference between GCM_CONN and GCM_CONN_ALARM ?

[OUT] -123456789.png deleted

147 views :crying: ... please spend 10s to look if you have got the "internet settings menu" in your phone app !

del

any news on this one ?

My phone is rooted. Can you please tell us, what files have to be changed

more than 300 views and no one spends 10 seconds to look if he has the menu :'( ???

could you please have a look if you have theese options ....