Search results

CPU Throttle on Play Store

I think this will help you to have a general idea on my device... I think there is something not ok at your side ? Incorrect cpu contact with heatpipe ?

Would be cool to write where to get the canary magisk ( 1st time hearing of this) it's just the APK ? or do i need to flash the boot.img with a new zip file ? , how to install it ( does not seem to have a clean installer after archive extraction) and how to install the drivers (via this canary ...

Got in to bootloop when installed on Red Magic 3s 3.09, installed via TWRP, tried 5.5 / 5.3 and even 3.5 combo with both then tried opengl lite and the same, goes in to bootloop :(

Can you share your method of updating the gpu drivers ? Thanks

At least they are working on it and it gives me a peace of mind :)

Now you magically appear and give me something i already know after i wasted ~5h to find out and you kept crying in a corner... What are you ? A 12 years old child ? And for your info SD855 and SD855+ are the same chips with a slight bump in frequency but binned differently, with a slightly...

What happened with all of these info removed ? My fan started to make weird noises and i start investigating on its replacement... The most disappointing fact is i barely used the fan and the phone has around 6 month :| So what happened with the info ?

Unfortunately i cannot, i stayed around 30 minuted on that software (CN v2.17) then restored to original RM3 on CN V2.38 I only verified a few things, like gps, cpu and gpu frequency, UI smoothness, Signal and Download Speeds

Bad Joke of a guide is considered aggressive these days ? Whoaw, the newer generation is way over sensitive Besides the so called guide, i lost almost 4-5 hours investigating this so called guide with error fixing and so on, here is what worked for me The below "what worked for me steps"...

Aggressive people ? Guide ? The Guide was like this: Use this tool from this thread (https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3s-unbirck-tool-t4025207) and enjoy the much more stable firmware of the RM3S "END" And like i said in my previous posts, i asked him...

You don't realize this is not a GUIDE, this is a statement and you are telling us to use the tool for something.... You did not provide steps, video, guide, pre-requirements, nothing This is not my 1st time using this tool so i know how it works, i kept crashing my CN <-> EU roms and needed to...

TWRP states ERROR 7 when i tried this LE: Avoid using this so called GUIDE, this is a bad joke... I tried using the Tool on RM3 and the cmd remains stuck with at Downloading firehouse program... then after some time "Error]: Download programer FAIL.Please check phone status and reset into edl...

Any one besides OP tried this ? :rolleyes:

404 not found, link not working

I've been using CN rom with Gapps for 2 weeks... 1st i debloated then 2nd solved all issues with calls, gps and so on... Compared to global where i find lots of bugs, CN rom is faster, more bug free and more updates than Global... Please stop spreading false rumors... One of the most iritating...

If you are starting to question the question you should leave your excitement and start analyzing the phone in a more detailed manner.... Reading your comment made me write to you in a more detailed manner.... So let us begin: -> The Auto Brightness works and does not work, there are so many...

The current EU / NA Rom has a lot of missing features and bugs. Would be nice to have auto brightness, customization for home screen for the icons 5 x 6 / 4 x 7 and so on, a flat audio equalizer, custom Kernel with Battery and Performance optimization and so on

Hello everyone, I've been thinking and closely watching the evolution of this phone... As things stand, i don't see any interest from devs in Red Magic 3 Im thinking in selling the phone before it starts to loose its value What are your thoughts ?

No one know's the location ? :confused:

Not yet, i serached through root folders without success

Hello Everyone, I just received an update notification for global rom to 2.09 but i am rooted and need to know the location of the update to extract the boot image... Any one know it's location ? Thank you

I've got via Aida64 around 4975 max until now.... So the 5000 mah is real...

If can you boot the device, i think you need to go to developer option and tick the OEM UNLOCKING option

Send me your paypal account to send to 3 beers bro !!! I never imagined flashing the partitions with locked bootloader then flash again with unlocked bootloader will solve the problem ! Thank you a million times !!!

I did as suggested and i get the Your device is corrupt message that you got a few posts ago

Ok, i'm currently in flashing procedure with locked bootloader (used fastboot flashing lock command).... How do you advice me to reboot to recovery ? Via Fastboot menu ? Or turn the device off after finished flashing system.img then power up with volume up ?

I attached 2 pictures in my previous post with command lines... Are you sure i can flash partitions with relocked bootloader ? Last time i knew, i could not

Ok so i did the following, i erased all partitions boot, parameter, modem, recovery, splash and system Then i relocked the bootloader and got the same error you got above Unlocked the bootloader and flashed all partitions with CMD as administrator, but system.img had to flash via powershell or...

I think i'm in the same boat as you.... What did you do is re-lock the bootloader then unlocked it again ?

I have no idea how did you managed to flash the system.img C:\adb>fastboot flash system system.img target reported max download size of 805306368 bytes Invalid sparse file format at header magi LE: After this error, somehow it manages to continue and flash all partitions of the system, but...

On global rom, the fastboot flashing unlock does not work... even if i change ports from 3.0 to 2.0... The TWRP is available only for China rom ? On Global does not work ? LE: Make sure you have latest ADB Drivers 1.43, after i updated to these, the flashing unlocked worked

Can you please post a picture or two ? I am really curious, because i also order one red magic 3

Hello everyone, I just orders a Red Magic 3 6 GB with 128GB internal and wanted to ask if there are any specific or special steps into rooting the device ? The phone is via Ali Express with DHL and will arrive on 25 Jun and want to ROOT and TWRP on day one (i think it would be China ROM) What...

Any one else experienced phone dead after latest update ? All was working perfectly until this morning when i found the phone just dead... I updated to 17 Jun, all good, no issues and this morning i found my self late at work and phone dead.... It refuses to charge or power up :|

Can some one please tell me how can i flash 9.4.18 without loosing twrp and reinstalling it via adb ? I want to update via twrp if possible Thank you !

My bad Alek Dev .... I assume that V10 and 9.3 will be pushed to official website when they are ready ? Or is it recommended to download directly and install from telegram group ?

Is this kernel dead ? No updates for quite some time... And my phone is very unstable with latest LOS and v9.1 or v9

No clue unfortunately .... Maybe the dev can answer our questions ?

Slowly, the gpu oc is going extinct, the cpu i see it won't come back... Looks like its time to go back on stock kernel :(

Is it me or the 19th version is less stable than the previous one ? For example i had 2 random reboots and 5/5 crash on accu weather daily tab

Edit: My bad, found what i was looking a few pages back.

Good, i've read the change log but still have to ask about the 3.4 ghz on cpu as i can't fins any thing in changelogs

Any chance to update the touch screen driver from latest 8.12.6 and upload 65hz version with 3.4ghz cpu and 825mhz gpu version ?

I've just flashed R4 coming from ExtremeKernel and whoau ! I prefer the touch responsive over the small performance gain, but i'll still ask if there is any chance for an R4 with custom clocks on CPU and GPU ?

Is there any way for the 65hz version to oc the cpu near the 3.4 ghz ? The 70hz does not work for me, it freezes the touch at boot

I tried both variants, like adb reboot bootloader then fastboot flash recovery twrp.img and it remains frozen with no response and on the device it says "press any key to shut down" and also tried from directly booting in bootloader via Power button and volume down and same, it either says this...

Yep, i tried all variants of usb debug and still the same, i had .18 with magisk, busy box and so on and did this horrible mistake to flash oficial .25

This is how it looks... Any one knows what could cause this ? Boot , flash, pretty much everything looks like this.... I tried 4 different cables, 3 different ports.... same C:\Adb>fastboot boot twrp.img downloading 'boot.img'... FAILED (command write failed (Invalid argument)) finished. total...

I have an issue, maybe i did something wrong.... I flashed via TWRP latest developer to update from .18 to .25, lost twrp and now when i attempt to flash twrp back, the adb terminal freeze when i confirm to flash via fastboot the recovery image.... Did i do something wrong ? Thanks