Search results

If one upgrade firmware with S-off to oreo firmware, is it possible to downgrade the firwmare later? Ie, is s-off supported on oreo?

If I update firmware to Oreo firmware, will it be possible to downgrade firmware later? Im worried that s-off wont work on Oreo firmware and that the upgrade is a one way street.

Cant se it mentioned anywhere. Always on Alexa/google/whatever but no always on screen. I would not like that. The backlight lights up way to much, esp in a dark room, for it to be usefull even with rly low light level. ---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM...

Always on display for htc u11? Keep dreaming. It has a LCD, so that would mean the entire LCD has to light up, and then you can say god bye battery life.

I managed to get back to RELOCKED, to do it I had to reflash 6.0 firmware as 7.0 firmware does not let you turn on OEM unlocking when allready unlocked the bootloader, and the lock command does not work if the OEM unlocking is "on" (but it was off, weird). I flashed 6.0 and relocked and...

Yeah s-off is only needed if you want to change base firmware (radio, bootloader etc). Most usefull for downgrading the firmware. Also S-off lets you reset the phone to LOCKED without the RELOCKED normal htcdev unlock allows for.

I realy hope you didnt put it in salt water..

Due to increased issues with triggering safety net i wish to go back to locked (or relocked, same deal really). Im S-OFF Unlocked now and the fastboot oem lock command gives me a error: (bootloader) [KillSwitch] : /dev/block/bootdevice/by-name/frp (bootloader) [KillSwitch] Last Byte is 0X00...

Im impressed by how clean the device is inside, unlike previous devices (10, m8 etc) that all was a PITA to tear down with ribbons going through the mainboard etc.

this just sounds anectodal. One device getting a update is no guarantee the rest of the devices will get it. Frankly, all OEM's are as bad. Sometimes they are better, sometimes not. My 10 still has Jan patch and android 7.0. Not that i think u there is anything wrong with the current software...

16:9 is just 4:3 cropped so there is no reason why you should photograph in anything but 4:3 and then crop, to keep all the information. Selectin 16:9 mode removes a big chunk of the information from the sensor. Sure it fills the screen, but that in itself is a poor reason.

Is 7.1.1 even offical? For me it feels like beta firmware (it has lots of buggs and is not stable, not like 6.0.1) and the fact i never got it OTA and had to update manually makes me more certain of this.

Want a stable device? Use the software they came with (6.0). buggy software is not unique for ZTE and tbh, the 7.1.1 update is BETA for G devices anyway. Officialy my device is on 6.0.1 with B6. And it's stable and has all the features i bought the phone for. People buy budget devices and get...

Are you sure about that mA? USB type A ports and cables are not validated for more then 2.4A. Thats 12W max for legacy connectors. QC3 circumvent this by going higher voltage, up to 9V generaly but at most 2.2A. Giving you around 18W with the Axon 7. This i have verified by having a in-line...

I would like to have the B11 update. Im from sweden and the device came with B6, and B10 was never offered over the air - updated manualy with zip to B10. I'm not getting B11 over the air either. Im using the "over the air" instead of OTA to stop people from confusing concepts here. Something...

One thing i DO hate about android is the whining people on forums (esp XDA and reddit). ZTE has delivered way more then say, samsung or many other OEM's and are WAY better then any of the "small" oems flodding the market. If it was up to one guy at ZTE it would probably be done now, but alas...

7.0 has been a mess, and even 7.1.1 has alot of problems, even on nexus/pixel devices. It would suck to be on 7.x and have that 30% battery bugg that alot of people experience. And thats just the obvious buggs. 7.x does not offer enough of a upgrade to make it worth having a buggy release. Esp...

It's 99% random seriously. Its saying safety belts are uneccary because you came out of a high speed accident without injuries..

Im getting bootloop with viper 4 and 7.0 firmware. Tried whiping in stock (was whiped before). going back to stock. This is a WWE (401) device.

Wifi is a strange beast to fix. Some say it is stable (works just as expected everywhere i tested it) but it entirely depends on the WIFI enviroment. Some access points dont like certain mobiles, thats just the way it when trying to fix this as the OEM (htc) they will probably break it for...

1.90.401.5 incoming OTA sometime soon. Firmware is avail. from maximusHD for those with s-off, no new base though still .3 twitter.com/LlabTooFeR/status/760781314991718400

The firmware is unsigned, so thats why he get red text.

either the SSID is hidden or it uses a channel not supported by the HTC. 2.4ghz has band 1-12 in europe and world wide, us also has band 13 wich europe devices wont se

Does it matter if it gets aug or not? My N5X has july, same as 1.90. Seriosly, the patch level is just dumb for google to have, it means nothing for 99% of the users and those that care only do it because they are #nexusmasterrace and use it as a point to claim superiority over all other OEM...

Yes, same here. I had a problem in certain regions (ie at my work) that the phone kept switching tower (4g/4g+) and never stuck until it failed and went back to 3g. now it works great again. ---------- Post added at 08:11 AM ---------- Previous post was at 08:09 AM ---------- well, if it is...

I have had problems with 4g at work (it keeps switching towers between a couple different every second, until it gives up and fails back to 3g) but with 1.90.401.3 firmware it works perfectly fine! So there is a new radio in there, the first new radio since release for WWE (1.30 has same radio...

UPDATE: I installed the latest firmware (from maximus), 1.90.401.3. New radio or something fixed my problems with 4g! Now i connect to 4g and 4g+ like it should and gives me around 100mbps download speeds, like on other devices.

My experience is that 1.80.xxx.1 and .3 is laggier then 1.30 this has to do with kernel changes from HTC in the official firmware. I noticed this in the setup - in the first screen where you change language the background moves. On 1.30 it flows fluidly for as long as you bother to look but on...

If i go inside (*#*#4636#*#*) menu and force LTE, it shows as connected to LTE/LTE+. But when i look inside the program, it see it change CID every second - it is constantly is doing this every second, sometimes it stay long enough for a speed test to start but it will generaly fail This is...

I have a problem on certain locations - LTE keeps switching towers every second, refusing to establish a good link (ping etc fails), this is most visible when inside the (*#*#4636#*#*) menu, and when forcing it to be LTE only. you can see what tower it is connected to (CID of tower) and it swaps...

Try usb otg keyboard?

How is people experiencing 1.80.401.3? I think it feels slower and less fluid then 1.30.

after a bit of investigating I can notice that the problem is the phone keeps switching cel tower. It changes every second - it goes to close one with 4g+ and 5 bars, to another with 2 bars and 4g and up and down. If i go to dialer and enter *#*#4636#*#* and then go to phone information and...

What rom version are you now and what version did you have before? with 1.80.401.3 4g stopped working for me. It shows 100% reception but im unable to even finnish a single speedtest. If i switch to 3g or 2g it works as it should, but not as fast as 4g. WIFI works to. 1.30 works for me and im...

I have made my HTC 10 S-OFF and LOCKED. Is there a way to make it S-OFF UNLOCKED? I know it would not make a difference, but there has to be a way to go unlocked/locked right? Fastboot oem unlock and variations of that (incl req. a new unlockfile from HTC) does not work.

If you are s-OFF the phone will show as "s-off, locked" but still, in fact, be unlocked. the command to lock and unlock will not work. I was confused to but when i checked the s-off thread i saw that it will ask if it should be "s-off unlocked or "s-off locked" and recomended Locked, but had...

What version did you have before 1.80? I have noticed since 1.80 the phone is way laggier, you experience sound like mine. I am going to go back to offical 1.30 and wait for HTC to do something. 1.80.3 also breaks my 4g, .1 does not. But 1.80 is overall much laggier and can be noticed everywhere...

FYI: reception is 100%, ie full bar. Same sim card in a phone laying 10 cm away gives me top 4g+ speeds. Installed 1.80.401.1 firmware and 4g works as it should (ICE rom) Ever since the 1.80 line of software came the phone has felt slow at bootup and generaly not as fluid as on on 1.30. For...

To add to this, 3G works just fine if i switch to it manualy.

anyone on 1.80.401.3? 4G is not working as it should on my phone. Im gonna try a older radio and se if it changes.

S-OFF, LOCKED Running 100% offical 1.80.401.3 4G does not work. It show 4g/4g+ and max reception in status bar but when i try and run speedtest it fluktuates from 2-5 bars and flip between 4g/4g+. Speedtest failes after 30 sec or so. Same sim card and same location gives me 110/mbps (yes!) on a...

Unless you are unsure you downloaded it all, MD5 is not really needed. There is no way to flash a "hacked" RUU on a s-on device, the image is signed and there is no way for hackers to sign the RUU. If they could, S-off would be way easier to come up with.

Yeah applying OTA's take a while longer now that they are doing it block-wise. Difference is that the system hash need to match whatever the OTA has, if it missmatch the update will not start. Thats why applying OTA won't work if you have ever mounted system as R/W (it will detect it and not...

Im going back to 1.30, again, after updating to 1.80. The phone gets less fluid and the overall experience of the phone is that of 100 dollar samsung crapphone. I don't recomend people updating to 1.80 at this time. I might have a bad egg (some combination of hardware (there is different...

No, not over the air. I downloaded the file posted earlier and did the update through recovery with update from SD-card. a bit of a warning: I initialy tried to apply the OTA by sideloading it with stock recovery. I aborted the sideload after 50% (it took ages, 15-20 minutes for 50%) and that...

0 installed apps beyond those included in the phone. The update was applied on a stock 1.30 after factory reset. There has to be reasons why 1.53 and 1.80 have not yet been released for my device. my cid is htc__034 (usualy swedish devices had HTC__Y13, atleast my m7, m8 and m9) and mid...

I installed the 1.80 ota manualy over my 1.30.401.1 and the phone became much laggier then before. I restored 1.30 (im s-off) and it was light and day in performance. There has to be a reason 1.80 are delayed for european wwe device, as i have not gotten the OTA officaly.

HTC updates are generaly fast but there might be another issue here. They have, historicly, been fast delivering updates to WWE. Might be the case that 1.53 is not relevant for WWE devices or that the update is skipped in favor for another skip. I fully expect N to be first on HTC 10 of all...

Tried replacing your sim-card? They are basicly free and should get swapped out without anny issue from your operator. Many stores can do this for you aswell if you ask nicely.

this is how it works QC is the solution to the problem with microUSB capping out at around 2.4A. We all know that volt times amperage equals watt. To get anything more then 12 W you need to either increase Ampere (wich u cant) or voltage. QC increases voltage. For instance my M8 increase the...