Search results

Nope...

1. Have the QPST 2.7.366 or higher version installed. 2. Make a local folder, copy sbl1/sbl2/sbl3/rpm/tz images to this folder. 3. copy the emmcswdownload.exe from C:\Program Files\Qualcomm\QPST\bin to this folder. 4. Prepare the partition_boot.xml as below and copy the partition_boot.xml to...

You must add and gpt in singleimage.bin and size must be 3.0mb.

Try with these files.

Make new petition to motorola-lenovo for (realasse, made bootloader repair tool for Moto g 2nd gen) and post petition link on XDA. To all members with this problem sign it.

Nothing you can do to repair bootloader. Try to find mobile repair service how work with Medusa pro JTAG. Sorry for bad English.

Nothing you can do. Bay new phone and wait for blank-flash, maybe in sometimes be realased.

Only to send in India...

No.

Not working with sd card on xt1068. Maybe bad dump or moto g can not boot from sd card. Dump have 39 partition, dumped from the same xt1068 with android 6.0. But it is not more detected as Qualcomm HS-USB QDLoader 9008, now led is blinking every 15sec and when blink, show up in device manager as...

After 30min on pc it light up led and now is blinking, when blink on pc is recognized as human interface device (hid-compliant device and usb input device) but won't power on.

Not working. I copied with hdd raw copy tool on sd card, and when i insert to moto g nothing happened. no more detected as Qualcomm HS-USB QDLoader 9008 with sd card, when i removed card then Qualcomm HS-USB QDLoader 9008 back. sd card messed up. :(:(:(

Try this http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25

Mobileunbrick.com working on remotely unbrick xt1068. This is only hope for now.

Do not downgrade bootloader, and everything is fine.

Not to bay, go in the repair servis who have jtag, and pay 20$ to unbrick. In Belgrade only one r.s have riff box jtag. And can't do anything with my phone, say can not access emmc (read only) To send in India will cost to mach money, and maybe can not unbrick my moto g xt1068. I will waiting...

You can try with jtag to read from working phone emmc and flash to bricked emmc. (mobileunbrick.com re alive xt1068 16gb on this way)

Only first gen can be unbrick so far.

Connect to pc, press and hold power button until hear sound from pc device disconnected and connected. If is in device manager qusb bulk you are bricked phone. Try hard reset: press and hold the Power Button for a full 120 seconds while connected to a charger

Can somebody extract and create singleimage.bin from motoboot.img? Maybe programmer from first gen can flash singleimage from 2nd gen and unbrick. They have same MSM8226 chip, but different bootloader.

Check this firmwares for blank-flash! Download and check only 6.0+ who have fast net speed.���� http://firmware.center/firmware/ http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=25

Any news for blank-flash? I waiting almost one year to unbrick.

I have xt 1068 it is hard bricked almost the one year.

Log from xt1068 5.0 blank-flash C:\Android\blankflash>qboot blank-flash --debug I - opening device: \\.\COM15 D - \\.\COM15 opened I - OKAY [ -0.000s] I - greeting device for command mode D - Receiving HELLO packet D - TARGET PROTOCOL INFO: D - name: sahara D - version: 2 D - compatible...

There is no leaked blank-flash tools for any moto g 2nd gen. No 4.4.4, 5.0.2, 6.0. Moto g have all unbrick tools. 4.3, 4.4, 5.0 no fer.?

Can somebody create singleimage.bin for lollipop moto g 2nd? We have programmer.mbn from moto g first gen.

Same error. FAILED (blank-flash:sdl-transfer-image:sdl-hello:error sending packet)

Can this blank-flash unbrick moto g 1068 sec gen?

Only good software engenier can do something to realive ours m-phones. (Make programmer.mbn)

If you can't boot to bootloader, Try first hard reset: press and hold the Power Button for a full 120 seconds while connected to a charger, or power & vol+. Then flash stock ROM with mfastboot.

Only with blank-flash for that version of bootloader or higher. If someday leak from Motorola. But I doubt.

Not working for my moto g.

Wait to leak blank-flash from Motorola (Lenovo). Some developer's to modify k.k programmer. Bay new board, or sale in parts.

Yes, if downgrade bootloader first, then ota corrupt bootloader. Mine is dead because wrong name of firmware. (ll 5.0.2) it was (kk 4.44 and ota 5.0) then i press restart and i have BLACK SCREEN OF DEATH.

Only downgrade bootloader or flash wrong firmware (motoboot.img) can hardbrick phone.

Wrong programmer.mbn and singleimage.bin Wait to leak blank-flash for lollipop.

Press and hold power key on phone till process begin.

I think, we only need same bootloader version on emmc and rom. We need access to emmc to write files. Riff box can't acsess my moto g. This is little help for make or edit programmer. http://iknowu.duckdns.org/files/public/Qualcomm-Secure-Boot/Qualcomm-Secure-Boot.htm

Only correct version of programmer.mbn (41.18+) can revive sliping snapdragon chip. And push broken qfuse to ON.

We will wait a long time to leak firmware with mbm-ci 5.0(Maybe never). Now is 6.0 our hope. We need also programmer.mbn and singleimage.bin with verification of signature from motorola.

Here is solution for dead battery.

You must wait for new blank-flash with 41.18+ bootloader. Maybe somebody make flash tool for moto g.

Latest blank-flash is k.k 4.4.4. I waiting for 5.0.2 or 6.0 over 3 months.

We need also programmer to flash image.

Nothing in there, no mbm folder.

Does someone send it mail to verizion? They have mbm-ci 4.x.x, maybe have 5.0 to provide.

They have this on web site: Software Version: 221.26.5.falcon_cdma.Verizon.en.US. But cannot find this firmware to DL and check what is inside zip.

mbm-ci 4.x.x is leaked from verizion network firmware, not from motorola! They have worst support on world.

This is our fault. We are hard brick motorola phones. So we must create some tools or wait X time to leak mbm-ci 5.x.x