Search results

Hi, MSK1, I searched for a long time for this solution, so maybe this one will help you out. You can launch Google Maps directly into Navigation mode via using an intent. You may find this one interesting. https://forum.xda-developers.com/showpost.php?p=46600949&postcount=3 Mine looks like...

Hi Folks, my S9+ died and I got a warranty refund. I don't want to say it was a Bad one, but maybe this is a Chance to go for a new one. I would like to go for a Oneplus 7Pro, the upcoming Xiaomi Mi 9 5g or the Vivo Nex 3. But all of them seen to have very high sar values that scared me. Sammy...

Hi, I dirty flashed Los 16 and Gapps over Los 15.1. It works like a Charme, even smother than Los 15.1. Great Thanks to HardStyl3r for overtaking Support of Los for our loved G3. Keep up the good work! Regards 3di

Hi, our beloved G3 got kicked out of the LineageOs build rooster (se source below). Unfortunately this could mean the end of LineageOs for us in the far future - I hope there will be a developer who will adopt this careworthy device. Any suggestions? Source...

Hi, I'm on oneplus 3, using stock Rom at the moment - and I can't confirm any of those issues. Bonus Android 8 oreo is out since yesterday! Best regards

Hi Guys, does Android Auto work for you guys? Mine says Google Services doesn't work at the moment. Anyone can confirm, or got a solution?

Does Android Auto work for you guys? Mine says Google Services doesn't work at the moment. Anyone can confirm, or has a solution?

Hi all and Hi Igoritza, I experienced another strange behaviour. I got a Board from a fried, it works just fine, but the display shows a dark area when it's light is dimed to the lower levels. If I change the board into another phone, it’s the same, so it isn’t a display problem. I tried SMD...

I also had this issue - solved it with 350°C SMD heat gun for 1,5 Minutes and pressure on the frame of the SD card. This is permanent gone since that. I think bare flame is to undefined in temperature, you might risk other components to fall of and you habe to work upside down, so gravity will...

Any Updates / Opinions on this? If i understand correctly Modem is the same in OOs and LineageOS - so this can only a be a problem of presentation in the stautus bar symbol-right?! Is SAR affected by which Rom you use? Best Regards, 3di

Hi xfim, I think it'll come back, but I’ll press thumbs it doesn’t!! In my opinion It's caused is a broken solder, if you apply pressure you reconnect it via contact, but not via a new soldiering connection so it’s not a proper solution. Open solder surfaces tend to stain - so the problem...

Man made sure to software will never be perfect, our brains are to limited to think through every possibility - but if ai aided software development steps in things are changing rapidly. Best regards, sorry for the oftopic comment.. 3di

I had a 1mm thermal pad under RAM and on the opposite side after reheating, it didn't last Very long.. For how many days fit it last on your device? Best regards 3di

This solution only works for a few weeks, it's known as a non permanent solution.. So don't be sad if those problems will come back :) Best regards 3di ---------- Post added at 09:52 PM ---------- Previous post was at 09:40 PM ---------- Hi, Interesting aspect - I never tried to...

This is a list of actually officially supported devices by LineageOs. https://wiki.lineageos.org/devices/ And this is a list of how much installations of LineageOs on those devices are active. https://stats.lineageos.org/ Of course if there are more users, in most cases there are more...

Please add me to your list. +49 1796969543 Thanks

https://forum.xda-developers.com/lg-g3/general/guide-fix-display-flickering-overheat-t3563068 Just have look here. As always everything you do is on your own risk. Best regards 3di

I have a bad feeling when loosing you as a main developer for our beloved G3. Is there anything we can do for your G3 - I e. collect for a repair? Best regards 3di

1. Search for display, enhanced desktop in settings 2. I use power and volume down for screen shots 3. Just Google LineageOs (your version) and root root, there are a lot of tutorials on the web. As always everything you do is on your own risk. Best regards 3di

I don't have any of those Problems for Pictures I would suggest bacon Camera - it supports devices without Google camera 2 AP, and it was developed for lg g3 and others. SOT is about 3,5-4h (in LineageOS Efficency mode, Greenify, Screen brightnes 50-70%, most of the time not on WLAN) No...

I did a clean Flash of LineageOs, mine is D855 too, wiped Cache and dalvic via twrp, like discribed in how to install LineageOs. .. I never had a reboot for about 2 month. My G3 is running like Smooth as f****, a lot faster than stock. Unfortunately g3 seems to be not the greatest hardware...

S8+?

I did a clean Flash of LineageOs, mine is D855 too, wiped Cache and dalvic via twrp, like discribed in how to install LineageOs. .. I never had a reboot for about 2 month. My G3 is running like Smooth as f****, a lot faster than stock. Unfortunately g3 seems to be not the greatest hardware...

Just to be precise - I am not Dave Antoine (bryan2894), I just wanted to tell you were/who He is.. And I also wanted to say thanks to him Best regards 3di

In New York - in case you wanted to know.. https://github.com/bryan2894 bryan2894 - Thanks

New Backup Phone Hi guys – after my Backup LG G3 died, I need a replacement for my Backup Phone. Important for me is: SAR not to high 5.5 or bigger Rootable / LineageOs support Changeable Battery would be great Micro sd support Reading all this i would end up buing a Axon 7, but ZTE Axon 7...

Did you have a try on this? https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268/page121 As always everything you do is on your own risk. Kind Regards 3di

Yes

Some people here bought theirs on Aliexpress. You might find via forum search. Best regards 3di

finnq just wanted to say thank you regarding your great work on LineageOs for our beloved G3. You keep our G3s alive and worth using. Keep up the good work - we appreciate that. Best regards 3di

. Xcam only works on custom or custom bssed roms - this thread is about cameras for AOSP (Android open source project).[COLOR="Silver"] Maybe Google camera will be an option soon.. https://www.xda-developers.com/google-camera-hdr-ported/

No I think there are just some hooks. I opened it with a guitar Plektron. There are a lot of videos on YouTube about opening the LG G3, maybe you have a look there. If removing the dirt doesn't resurrect your earpiece they are about 5$ on eBay.. As always everything you do is on your own...

Hi, I had 2 G3 phones one is good after 3 Year, one had the problem, one not. Does this answer help you? If you have this issue maybe this thread can help you.. https://forum.xda-developers.com/lg-g3/general/g3-hardware-problems-solved-bsod-screen-t3597086/page5 As always everything you...

Maybe this will be a start for you..

Hi My story is nearly the same as yours, I wrote about here. https://forum.xda-developers.com/lg-g3/general/screen-flickers-randomly-t3577242/page3 I found this thread maybe it's interesting for you Igoritza did a great job here...

I would suggest bacon Camera - it supports devices without Google camera 2 AP, and it was developed for lg g3 and others. Else you could have a try on open Camera and Camera FV-5.

Thanks - it helped a lot :o:good:

I am with you..:) (sent from my G3)

To be honest, it's a more than 3 Jears old device..

I bought a new board (in case you are interested in story here - https://forum.xda-developers.com/lg-g3/general/screen-flickers-randomly-t3577242/page3 What I am curious about, my new board is from a cracked phone, but the phone was sent to LG repair short before it was cracked, and the board...

Hi, I also had the flicker problem, heat pads (1mm) under processor and on the ic on the opposite site of processor (under metal shield) gave me about 4 week of no problems. Then flickering came back the hard way, and the board isn't usable now.. I saw a YouTube video showing how little...

In case it's not rooted - I think it's a carrier brandet version - unfortunately not all carriers pass the updates through to customers.. Regards 3di

Have you reported it as a bug in LineageOs portal?

I had same problems in the past, solution for me was to remove the little magnetic dirt particles with a magnetic screw driver (phone often was in pocket with keys and in workshop) Of course opening phone and cleaning the loudspeaker at your own risk! Regards

I also had this problem, solution is a new battery (old batterys tend to fall in Voltage, which leads to bootloops). Regards

I don't think this is a bug, mine and many others behave like that..

You are welcome! I followed this guide - in case you are interested https://forum.xda-developers.com/lg-g3/general/guide-how-to-install-lineag-os-t3558777

Hi, If you have all the LG Ota updates, It's not possible without voiding your warranty, and at your own risk. If you're interested just read some threads about flashing a new Rom, for example LineageOs. Regards 3di

Unfortunately I wasn't added to the group - did you experience any problems? Thanks and regards 3di

Nothing to worry about, but also nothing to be proud of - I hope to find a Camera app that is more smooth to use.. I think the G3 Camera itself isn't really the best camera ever developed :)