Search results

Thank you, and hopefully. It had to happen. Mine doesn't get used much anymore other than for reading. But it goes for weeks in sleep. Like right now, it has 399hrs and still has 38% battery. Lineage can't do that. lol I keep thinking to upgrade but, like you, not until I have to. Thanks again. :)

Use the most current which is here. https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip For you, coming from SU, you'll need to do a "Full Unroot" in SU. I think that's how it's listed. Then reboot. Let it boot up then reboot into recovery and flash the Magisk zip...

I'm not really sure. With V1.6, I rewrote how Synapse starts in the init.rc. It calls on Magisk specific now. I can't remember for sure why I had to do that. Just make a backup of your ROM in TWRP first and give SU a shot. It might still work.

No. I really like this Tablet and I have no reason to move to another one. It does everything I need. But unless we get an update, there's nothing more I can do to the kernel that will benefit us. If we get an update then I'll definitely update the kernel as stock is what I prefer. I'm sure I'll...

For those few of us running stock still.... V1.6.1 is up! See/Read "What's special" Better start for Synapse so it doesn't get killed as easily Updated interactive gov And 2 things I said I wouldn't do.... Added extra Govs and Schedulers. I don't use them as I prefer interactive. But for those...

V1.6 is up!! See/Read V1.6 in OP OF NOTE... Somewhere in my testing, my Internal SD became unwritable. IT HAS NOT HAPPENED SINCE. I had to have hit a wrong button while testing NTFS and Synapse. IF this happens to you, Just make a backup of ROM in TWRP, and save your internal SD files. Then...

WOW!!!!! Those really are impressive undervolts! I'm lucky to drop 3 ticks from stock. I haven't really tried to go lower yet. I did finally try your settings and it crashed immediately. Go figure. ;) Anyway, thanks for posting these. Kinda surprised nobody has said anything about it.

From what I know of Samsung, at least the older ones and nothing about the A5, Odin has always erased int SD. Here's my thoughts on that..... I do know , again from past experience, anytime we update our phones or Tabs and don't do a clean install we end up with "Ghost's in the machine"...

I'm not quite sure what you're asking. But anytime you use Odin, it wipes Interal SD. I just keep all my files on ext SD. As for the CSC, I have never really noticed a difference. The only thing I've found is 5g wifi channels may not go high enough for your settings. Or work at all. But the...

I was just doing some reading this morn on the 715 and 815. The info is 3 years old and may not apply to Nougat. There may be differences in the modem. But that's about it. You can backup your modem and efs in TWRP. You should be able to restore those if there are issues with the "Y" version...

For stock, yes. Aug 2019. Selinux and build Sept 2019.

Right. All of the updates are Brazil. The 715 and 815 are both "Y" version. In the past, we've been able to use any Odin for our Tabs. You just may need to change the language on setup screen. If things have changed, I haven't heard. If you're nervous about Odin this, here's what I suggest: Now...

Sammobile.com is the place to get them. It takes about 1-4hrs to dl. Unless you pay the subscription. But, here they are for a quicker dl 810 - https://www.androidfilehost.com/?fid=4349826312261654449 715 - https://www.androidfilehost.com/?fid=4349826312261654437 710 -...

V 1.5 is up!! :D Based on our latest 2DSI2. You really should Odin 2DSI2 for 710, 810. And 2CSI2 for 715,815 first It's been about a year since you've done it anyway. ;) Updated to 2DSI2 Updated AIK to 3.6 Removed Battery charging from Synapse. (These things are getting old) BTW, you can still...

810 2DSI2 just came in. Looks like most changes are to our file system. Time for me to get back to work on this. ?

Well, I can't find the cause for it. At least not yet. And it does it with all Magisks, so that's not the culprit. It's not a big worry when it manually scans as clean. Everyone: While I was messing with this problem, I built V1.4.1 for all. It just has updated WireGuard 20191120. Nothing else...

The log didn't help. But, I had some time today to mess with things. I still can't get it to make me reboot. Until I left a file in. Can you check and see if /system/app/SecurityLogAgent is still there? It should be deleted. If you delete it, the warnings to reboot go away. It still shows as a...

I haven't had a chance to try out your config. Logs would probably help out. But I'm still leaning towards the newer Magisks as the problem. Seeing as how we have an older N kernel. And Magisk is trying to keep up with Q, now. The "A" "B" partitons are on O and newer Android. (Can't remember...

I have never experienced, seen or heard of this. If you can tell me how to duplicate it, I'll see what I can do. Seeing as how I've done a clean install of 2DSI2 a few days ago, lets see if you might have missed something. Here's what I remember on install. TWRP - leave as read only. I think...

Hi everyone For those that are still interested in stock, I just found that we do have an update on our Tab. It's from Brazil (which should work for us, but may not have the 5G for wifi if I remember right). It has a Security Patch Update of 2019-08-01 and a build date of Fri, 27 Sep 2019...

I thought it was WhatsApp problem. Didn't know it was kernel problem Gimme a week or two, and I'll look into it.

You made my day, calling me Lad. Thank you ? Been a long time since I've been called that. Yes, SuperSU is old school and has disadvantages in today's world. But it still works the best for me. Which is how and why I built the kernel. Magisk, 4 years ago, had a lot of issues, as it was still...

I guess I should have said that Magisk kills the "Snappiness" of the kernel. Not so much the performance. I didn't support Magisk until Version 1.4. Xposed and Magisk both took the snappiness out of the kernel. That's why I didn't support them. I like my kernel to open things fast and both of...

Won't hurt a thing. You may lose your previous settings, but that's all.

Yes. But you lose the benefit of this kernel. First paragraph. Stock RG2,RH1 build numbers. It will not work on anything else.

Yours, is the first input I've had lately on the Snapdragons. You can unzip it, and see what the updater-script says. And just follow it. You'll be doing it manually, but it's the same result.

Sadly, no. You have the Snapdragon CPU, And I don't think anyone has done anything with it. Other than Lineage

It did when I tried it. But it killed performance. That's why the post above yours. I'm using the setup on that post. Edit: As I've been saying all along with this kernel, any Magisk kills it's performance. If you flash any of these kernels with SuperSU and run it, you'll see a big difference...

I'm not sure what's up with my Tab...…. 1. It's wore out and getting tired or 2. Magisk is killing the performance for it with each update. I'm leaning towards Magisk and here's why: (I still prefer the old SuperSU, all around) Uninstalled latest Magisk, reboot to TWRP, Flash N4N v1.32 and...

I'm not sure how to explain this without sounding mean/bad. LukasAddon was also used by ananjaser. anan is easier to use, but they both build with Werror disabled. I don't do that. I prefer to build my kernels with no errors. Some say they are no big deal, but not in my eyes. Even fixing the...

It's in the OP under "Bugs" and the first 5 posts explain it. If it's still causing issues, reflash the kernel. If those don't work, then it's not the kernel and probably your Rom.

Well, I gave dt2wa shot. It didn't go well. It wouldn't even compile. I'll give it another go in a few days. On another note, our H2 kernels have the same security patch as any of the later build. I think they are the"K" build. Looks like as of June 2018, Samsung is done updating our tablets...

I'll look into it. If I remember right, it was buggy in the past. Give me some time as I've been really busy lately. But I will look into it

There's an "H" build here. https://forum.xda-developers.com/tab-s2/development/kernel-9-11-18-rg2-rh1-710-810-715-815-t3841316 Edit: But permissive is only selectable in Synapse or maybe other tuners. They're not built permissive.

Updated Magisk 17.3 and up, (18.0, 18.1) compatible kernel is here https://forum.xda-developers.com/showpost.php?p=79164496&postcount=42 Enjoy :D

Updated Magisk 17.3 and up, (18.0, 18.1) compatible kernel is here https://forum.xda-developers.com/showpost.php?p=79164496&postcount=42 Enjoy :D

Updated Magisk 17.3 and up, (18.0, 18.1) compatible kernel is here https://forum.xda-developers.com/showpost.php?p=79164496&postcount=42 Enjoy :D

V1.4 is up!! Now compatible with Magisk 17.3, 18.0 and 18.1!!!! Should be compatible with all Magisks. I don't know why a toolchain would make a difference, but had to go back to Google 4.8 toolchain Install - should work for all. But I tried with 17.1 and 18.1 1. Boot into TWRP 2. Flash...

V1.3.2 released See/read OP Basically just... WireGuard updated to 20190227 Memory and battery tweaks Enjoy :D EDIT: These are the kernels in RR and Experience ROM's

On the Synapse part, you'll need to do "worst case scenario" in post #2. You may need to do it a couple times, and you'll lose all your settings. Once that gets cleared, all should be normal. Then you should be able to apply your settings. Synapse can be stubborn sometimes. Chargers and cords...

Don't use 18 then. I hear it's buggy, right now. I'm sure it'll get fixed. If not, then we'll just have to stay with 17. It happens sometimes. SuperSu went through similar issues in it's day.

No it doesn't. In the op, you use SuperSU. The latest kernels are here and you can use either. https://forum.xda-developers.com/tab-s2/development/kernel-9-11-18-rg2-rh1-710-810-715-815-t3841316. Or, if it's too new, look for the other kernels in this forum. I think RB1 was the earliest one I...

I don't have it on my 710. And I've used it quite a bit. It might be a rogue app. Maybe a memory setting is off. And the tablet keeps shutting it down and restarting it. I can't reproduce it, so I'm not sure what else to suggest.

I'm outta country for another week, but if you could post a pic of the error it would help. It's sounds like a Synapse error that's why I need the pic. Spam this thread if you need to, to be able to upload pic. There's not many of us left. ?

V1.3 is up!!! Make sure to See/Read Post#2 WireGuard updated to 20181018 - It is no longer free! Some Tweaks Battery Charging control - See Post #2 If you don't touch it or use a tuner, you'll be fine BUT!!..... Not all setting will stick Just changing cables can change how it charges - an...

That is all correct. But in the past, the wifi fix has been to make 5G work on any ROM. Regardless of locale. It used to be 1 file, then became 3 files in /system/etc ?? I've made those mods already, but no love. I do have one more thing I'll try before going back to G2. Just to mess with you a...

Thank you! My Tab has been acting really weird also. The battery will sometimes drop fast, other times normal. I was running the G2 Rom build for the 710 So I switched to the H1 Rom build that just showed up on Sammobile, and all was fine. But no matter what, I could not get 5G to work. So I'm...

That's actually what I just finished working on. I'm just a little apprehensive to release it because our Tab and batteries are over 3 years old now. Samsung's last couple updates have really worked over the batteries. Mainly on the 10 inch models. So even they, have some concerns. I will...

I still need details. What model Tab? What ROM? Do you have Xposed installed? I can't replicate it on my 710 and stock

I need more details. But my best guess is to turn the kernel settings down. This kernel cannot run at max everything. You need to finesse it. ? Samsung's DVFS will disable auto brightness if things get too hot. It's my failsafe and why I won't disable it.