Search results

Anyone successfully ordered a replacement screen for the realme gt2 pro, without the digitizer ideally? Any suggestions for a reliable online store where I could fine it? Ebay and aliexpress is pretty dry.

Actually had the same issue, in settings go to the Private DNS menu and set it to off. Turn on areplane mode for a few seconds and your dhcp settings should be valid again.

I would try wiping data and flashing again.

I have no idea mate, sorry.

Have you tried the mirror link on mega?

Flash Magisk patched boot.img again.

Also updated this guide on the forum, cheers!

Updated OP with global version boutloader unlock/deep testing tool apk.

Deep Testing tool doesn't work with the global firmware.

Do my knowledge no. If it's SafetyNet and avoid bootloader detection that you're looking for, I suggest you install Magisk (using the provided patched boot image in OP) and use the safetynet module.

Did you keep the app before the guy disconnected?

Very sorry for you mate! I updated the OP to warn about this.

You would need to install Chinese rom again using another method of installation or wait for deep testing app to be available on global. But you could still use your device with the global version.

Try another USB cable and make sure you are in the folder where fastboot program is.

Great to hear, congrats!

It did take a couple of tries to get it to work but still that was done in like 10-15 minutes. You could try to factory reset the phone first but if it's still doesn't work for you you'll be stuck re-installing everything on your phone.

Google pay works, safetynet passes with Magisk module (probably good if you unroot and relock the bootloader but then you'll be stuck until realme unlocks the RMX3301). but level 3 widevine unfortunately. Also some apps do detect that bootloader is unlock even with safetynet module.

I was stuck in bootloop too when I flashed the global version, try running the last 2 commands or wiping data from recovery then the last 2 commands again. fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img fastboot -w

Good luck mate!

I posted the files here: https://forum.xda-developers.com/t/chinese-version-install-rmx3300-a-19-stock-firmware-from-global.4429673/

Disclaimer: I am not responsible for bricked devices, dead SD cards, etc! Warning: This procedure didn't work for some! Please test at your own risks! Additional warning: do not relock your bootloader once your global rom is installed. You risk bricking your device. 1. Make sure your...

Disclaimer: I am not responsible for bricked devices, dead SD cards, etc! Warning: I didn't test this procedure, I did backup the images from stock Chinese version before installing global version but I didn't flash it back. Please test at your own risks! 1. Make sure your bootloader is...

I am not responsible for bricked devices, dead SD cards, etc! I have not tested the global unlock, Global version unlock thread. Make sure you make backups before unlocking the bootloader, as this operation will wipe all user data and apps. Make sure your system version is the official and...

I can't see the past history in the group. Can you copy the steps in here. I'll make a separate post about it after.

On your Chinese device or you bought the global version? If you managed to install Global RealmeUI on Chinese version please share how :D or post a link

Hey! I extracted it if you want to give it a try ;) Are you still on PE? Did you try another ROM yet?

I would like to try and install a gsi ROM too. The only thing stopping me is how do we install stock ROM again if we need to?

Why don't you update the ROM to the latest version?

Would twrp be able to flash it though?

I was also able to get unlock request approved. It took a few tries but switching to simplified Chinese did work indeeed. I read that running the unlock bootloader command will factory reset the phone. I'll take a backup tomorrow and try to unlock it. Thanks for everyone's help, it's a good...

@shyzj666666 I'm pretty sure I got the right version installed, I see the badges in the Settings/Personalizations/AOD screen. But they do not show up in the actual AOD :( Anything else you did after installing the global apk? See pics attached.

You're a legend! I'll give this a try! Thank you so much!

Thank you for this @RedFoXite ! Unfortunately, this apk needs to be pushed to the /product mount which is read only and not user mountable without root access AFAIK. Guess I'll wait for the bootloader unlock and global rom extract after all!

If someone with the Global version of the GT2 Pro is reading this, if you could extract the AOD app using adb shell command (with developers options turned on) I would like to try and install it. adb pull /product/app/Aod/Aod.apk . Thanks!

Well I found the issue: AOD notification badges only display if the default system launcher receives the notification first. (with Nova launcher, I never get the AOD notification badges) Secondly the badge only displays for particular apps, SMS, phone calls shows the badge but not gmail...

Hi all! Was wondering if anyone came across this issue: when receiving a notification the screen wakes and I can see the notification but there's never a notification badge on AOD. Also, after unlocking/locking the phone, the notifications don't appear in the lock screen either, only on the...

Read back 3 posts before you mate.

Same here

EDIT: After the 2nd reboot to recovery, the recovery screen loops and I can't get into recovery. Tried with TWRP and Orange Fox. Any ideas on how I can get this ROM up without forced encryption and recovery working? Note: I'm on the China device with RAPHAEL-V12.0.6.0.QFKCNXM-10.0-vendor-firmware.

I booted of [email protected]_3 but it still shows /sdcard encrypted and not prompting for password.

Hi! With encryption forced in TWRP, how can I install a Magisk module (like ANX)? Thanks!

Got it to work with the older Safety net module and removing the others! Thanks for the help!!

Still not working for me after following this thread. What device fingerprint did you use?

Hi! Thanks for the update. I've got an issue: home gesture is not working anymore, the bar is there but it doesn't react when swipping. Also I can't seem to find the gesture/navigation bar settings selector either... Even FNG doesn't work :/ I did install the with gapps by mistake, then...

Nice! If you are comfortable sharing a build I would surely try it once I receive my device, I've been on Lineage for years!

Hi! Is there a thread or telegram for Lineage build for Alioth? Thanks!

Hi! I see in the screenshot from OP that the max refresh rate option is 90hz. Can someone confirm of 120hz is available?

You can follow this page for new releases: https://downloads.akhilnarang.dev/LineageOS/raphael/

Logs would be more useful then a crying emoji if this is a ROM related issue ?