Search results

  1. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    Send a picture of the screen you're entering the pincode in.
  2. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    https://forum.xda-developers.com/t/hack-navigation-multimedia-systems-kia-hyundai-and-install-third-party-applications.3892333/post-87637823
  3. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    You can't enable wireless Android Auto or carplay you can watch my video. The code is either 2702 or 27021427
  4. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    2400 Dealer Mode 20090090 21080281 22070472 23060663 24050854 25041045 26031236 27021427 28011618 29001809 12000000 3600 Forced Update Passcode? 27021427 worked for me. Previously it was just 2702. After this is patched shrugs. They just used simple md5hashes stored in firmware cracked it open
  5. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    I think that's a dummy screen to trick people. From decompiling my system on my unit before they removed adb. What you want to do is set the radio to FM then set the volume to 2. Then tap 6 times to the left and one to the right in the same sw info screen. A completely different password entry...
  6. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    Unfortunately, I don't have any information. More than likely it's embedded into the device I can't say for sure without physically opening it.
  7. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    Hey, I was wrong so first you need to enable screen capture on sw info/update screen do 5 taps to the left of the "UPDATE " button and about 6-7 taps to the right until it says screen capture enabled. After that hold "MEDIA" until the Korean words are displayed, then after about 3 or 4 toast...
  8. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    If you don't have a second button the right to use 7 ,3 ,and 1 but instead one button to the left for AV ON/OFF. Then you need to hold the Left button + the software "Media" button until the Engineer mode is displayed.
  9. Unjustified Dev

    Post HACK Navigation/Multimedia systems KIA/HYUNDAI and install third-party applications

    To the people who keep saying the engineering password doesn't work. Most sites don't list them all this is from the decompiled EngineerMode system app. For me on my Kia optima 2020 after I had my radio replaced by KIA 2801 worked. <string name="eng_pswd_default">2014</string> <string...
  10. Unjustified Dev

    Post [THEME][SUBSTRATUM][7.0+] Extras For AA Collection - Personalize look of AA

    shmykelsa is there no way to have no statusbar and onebutton R anymore? With previous versions, you could disable the statusbar and shrink the navbar with onebuttonR and have nearly a fullscreen experience.
  11. Unjustified Dev

    Post Screen2Auto - New app for AA smartphone mirroring (only for root devices).

    Just wanted to thank the creator. Combined with AA Extras you can get a near full screen experience. Just had to set the automatic full screen option. Sent from my ZTE A2020U Pro using Tapatalk
  12. Unjustified Dev

    Post Screen2Auto - New app for AA smartphone mirroring (only for root devices).

    I left beta , cleared storage, and then ran the whitelist that did it. Sent from my ZTE A2020U Pro using Tapatalk
  13. Unjustified Dev

    Post [ROM][10.0][A2017x][UNOFFICIAL] LineageOS 17.1

    Awesome work will check it out when I get home. Thanks for continuing to work on this device.
  14. Unjustified Dev

    Post Axon 10 Pro (Non-5G) EDL Tool - Flash / Backup / Restore/ Bootloader Unlock

    It's not compatible with 10 I'll work on a guide soon. Sent from my ZTE A2020U Pro using Tapatalk
  15. Unjustified Dev

    Post Any A2020U EDL Firmware Yet?

    Did you add the firehose programmer?
  16. Unjustified Dev

    Post Any A2020U EDL Firmware Yet?

    https://www.androidfilehost.com/?w=files&flid=313083
  17. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Join the conversation on Hangouts: https://hangouts.google.com/group/1MUQAYsm9hGhWtMo8 Sent from my ZTE A2020U Pro using Tapatalk
  18. Unjustified Dev

    Post Axon 10 Pro (Non-5G) EDL Tool - Flash / Backup / Restore/ Bootloader Unlock

    Join the conversation on Hangouts: https://hangouts.google.com/group/1MUQAYsm9hGhWtMo8 Sent from my ZTE A2020U Pro using Tapatalk
  19. Unjustified Dev

    Post Axon 10 Pro (Non-5G) EDL Tool - Flash / Backup / Restore/ Bootloader Unlock

    Yes that would work. Sent from my ZTE A2020U Pro using Tapatalk
  20. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    So U model runs on trustzone 5.2.2-00053 this is why FP isn't working. I can make a zip to update G firmware to match like we did on axon 7. If you want, you can edl flash U firmware then flash G modem that would do it as well. Sent from my ZTE A2020U Pro using Tapatalk
  21. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    The G firmware is incompatible unfortunately. Can you get the output of this command must have root or adb root. strings /dev/block/bootdevice/by-name/tz_a | grep QC_IMAGE_VERSION_STRING strings /dev/block/bootdevice/by-name/tz_b | grep QC_IMAGE_VERSION_STRING
  22. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Works on U model confirmed by another. Are you all just flashing on 10 firmware or did you actually downgrade to 9 first? Sent from my ZTE A2020U Pro using Tapatalk
  23. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Could be a different sensor? I'd have to check I thought they were all the same. They are all the same and according to your logs it read your finger pressing up and down. Maybe you aren't holding it down long enough for it to register? Sent from my ZTE A2020U Pro using Tapatalk
  24. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    I've uploaded a new build. Maybe something didn't sync correctly, but I've fully wiped my device with the latest build and the fingerprint sensor is still functioning.
  25. Unjustified Dev

    Post [6045*] [GUIDE] unlock bootloader

    There's a guide to flash recovery with an edl tool. Fastboot is gone from Marshmallow update. Sent from my ZTE A2020U Pro using Tapatalk
  26. Unjustified Dev

    Post [6045*] [GUIDE] unlock bootloader

    Bootloader isn't locked anyway guide is useless. Also sounds like a bad or outdated fastboot Sent from my ZTE A2020U Pro using Tapatalk
  27. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    You'll need to grab a logcat while trying to register a finger because it's not selinux. adb logcat > goodix.txt. Fp works perfectly on my device. Sent from my ZTE A2020U Pro using Tapatalk
  28. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Did you try sentenforce0 ? Sent from my ZTE A2020U Pro using Tapatalk
  29. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    You need to setup adb. Then run adb root after you enable adb root from the developer options. After you get a root shell # then you just run setenforce0 and try registering a fingerprint. If that doesn't work then get a dmesg. Exit the shell and run adb shell dmesg > fingerprint.txt Sent from...
  30. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Can you get a logcat? Also with root try setenforce0 I may have missed a selinux fix. Sent from my ZTE A2020U Pro using Tapatalk
  31. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    You'll have to go back because the engineer bootloader is incompatible with 10 firmware and that's the only way to unlock. Sent from my ZTE A2020U Pro using Tapatalk
  32. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    2020/05/03 * Fixed remaining use cases with wifi mac creation * Addressed remaining healthd selinux denials * Fixed a denial with power off alarm (still isn't working for me) * Enabled FOD Lorenzogianno * Addressed fingerprint selinux denials * Addressed sensor selinux denials
  33. Unjustified Dev

    Post [GUIDE] Bootloader Unlock

    It basically broke the system on purpose so you can't take ota updates. The only real change is the bootloader that was capable of fastboot along with the fbop partition which became obsolete. In Oreo, the bootloader was capable of fastboot regardless of fbop containing any data Sent from my...
  34. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Did draining the battery work? Sent from my ZTE A2020U Pro using Tapatalk
  35. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    That's weird I'm running that build now. But you should be able to go straight into fastboot with both volume up and down + power if I remember correctly. Sent from my ZTE A2020U Pro using Tapatalk
  36. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    The server should have been down how did you get the build? But your slot changes every flash. So technically you have fastboot just go there. Sent from my ZTE A2020U Pro using Tapatalk
  37. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    2020/05/02 is now uploaded * Removed unused subsystem daemon * Addressed another healthd selinux denial * Added doze app * Enabled zte pickup sensor for doze * Enabled always on display (I have not enabled burn in protection so be careful) * Fixed DTS:x Ultra selinux denial disabling audio...
  38. Unjustified Dev

    Post [RECOVERY][3.3.1-0][Unofficial] TWRP recovery for ZTE Axon 10 Pro

    Change it to samson.nwwn.net Sent from my ZTE A2020U Pro using Tapatalk
  39. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    It contains other fixes but they aren't major. I'll work on fp in a week or so. Sent from my ZTE A2020U Pro using Tapatalk
  40. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Could you try this image? http://samson.nwwn.net/~unjust/Axon%2010%20Pro/LineageOS/qi_boot.img don't forget to flash TWRP afterwards. Logs now show that the wireless charging state is set to enabled. Sent from my ZTE A2020U Pro using Tapatalk
  41. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    No problem at all. Sent from my ZTE A2020U Pro using Tapatalk
  42. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    About 4-5 hours of SOT depending if you enable battery saver which I do I go about 36 hours no charge with about 6 hours of SOT. Sent from my ZTE A2020U Pro using Tapatalk
  43. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    I'll probably order one next week. Thanks though Sent from my ZTE A2020U Pro using Tapatalk
  44. Unjustified Dev

    Post Any A2020U EDL Firmware Yet?

    https://easy-firmware.com/index.php?a=downloads&b=file&id=165761it doesn't specify region because they all have different model numbers. A2020U is the only US model. Link not working, but it's the ones the correlate with your build number for instance b10 or b04 not the PV that's preproduction...
  45. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Thanks, looking forward to feedback. Sent from my ZTE A2020U Pro using Tapatalk
  46. Unjustified Dev

    Post Any A2020U EDL Firmware Yet?

    It's available on easy-firmware
  47. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    Until I get those major issues worked out, I don't want to jump. There's a lot of work when bringing up a device to a new Android version.
  48. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    New build should be up in about 4 hours. * Increase max number of cameras in Snap * Enabled Aux camera in Snap * Snap will no longer open camera with legacy api1 * Enabled bokeh in Snap * Fixed DtsUltra crashing * Enabled Bt and USB settings in DtsUltra * Merged latest Qualcomm audio HAL *...
  49. Unjustified Dev

    Post [ROM][UNOFFICIAL][ZTE Axon 10 Pro] [9] LineageOS 16.0

    It's there! I grabbed it earlier today. Getting ready to upgrade my firmware to Android 10 in anticipation of getting my laptop ordered next Wednesday. Sent from my ZTE A2020U Pro using Tapatalk