Search results

I just followed the procedure to Odin flash this newest build on my SM-T510 and have run into a couple of problems and as a matter of fact, I repeated the processs and still have the problems. First of all, It booted up OK and I allowed the tablet to format my SD card as a storage device and...

I performed a dirty update and had no problems with this new build.

No, not just a wiping, but did you choose to do a data format in TWRP?

Just curious, when you did a "clean wipe" did you also format your data in TWRP?

AFH reports no mirrors for the new TWRP

Go to the first page of this post,,, Download: https://drive.google.com/drive/fold...HZThGTnM?resourcekey=0-0BunAmDBWluYPghT0Fs6CA All other ROM have been moved to androidfilehost.com .. https://androidfilehost.com/?w=files&flid=289295 Look in the "All other ROM" file and you can find a...

I followed all the installation steps to the letter but I had the same problem then I re-read the Repit page again, especially the Notes section. I found that I had to toggle the Enable/Disable several times AND I needed to remove the checkmark from System, Data, and Cache. After doing so...

It looks like there are no download mirrors available again.

I can report that I installed micro g on a Samsung Tab 4 and following the instructions referenced in previous posts, the Play Store works perfectly for Google and non-Google apps. As an example, I just installed Gmail from the Play Store and it is totally functional. I am now going to again...

It works as I stated in my previous post. It's a personal preference whether one wants to use the Play Store or the Aurora Store and I wanted to see if I could use the Play Store. It does work if all the instructions are followed.

Reference post #5000 I have used the Aurora store and was interested to see if I could do Google Play instead. I followed the instructions and Play Store is functioning. I can install Google apps but I can't activate and run them. Non-Google download and install without any problem.

I have tried flashing MicroG on my grouper with the MicroG rom build but I cannot get the Play Store to even appear in my app list even though I tried the patched version. I have tried various MicroG installers and when doing the self-check all the boxes are checked. Obviously, I'm doing...

Thanks, I've seen this info before but haven't installed the patched apk. I may try the steps and see if it works since the rom I've flashed on my older generation Nexus 7 is MicroG compatible. Update...I tried the patched apk on the older "grouper" Nexus 7 tab with MicroG compatibility and...

How were you able to get Play Store to work? I haven't tried MicroG on this device but my attempts to use it with the older Nexus 7 were not successful in getting Play Store to function properly.

Fantastic, thanks!!

Thank you so much for your continued devotion to keeping this device as current as possible. Your rom is stellar and I am very happy with it. You mentioned that you have merged the "advanced restart menu" but I am unable to find this in settings, am I missing something here?

Both of the MicroG downloads are for tilapia, there isn't one for grouper.

I've had this problem with several different roms on various devices. When I formatted data in TWRP and rebooted, the problem was gone and I did not get that message anymore.

Why are you trying to install ARM-64 gapps? I believe you should be using ARM gapps instead and then only pico or possibly nano.

Curious, still no mirrors for the newest milletwifi rom but the sha256sum file has several!

OK, thanks, will do!

I've tried to download the newest milletwifi build but I keep getting the message that there are no mirrors and therefore cannot get the file.

I followed the flashing instructions and successfully installed the new lineage-19-20211130 with absolutely no problems. I haven't had the opportunity to give it a thorough test yet but I can say so far it seems to be working very well. Magisk passed Safetynet and for a Beta, it is much better...

That was the first thing I tried but it didn't work. I also tried the renaming step as well as uninstalling Magisk in TWRP and then installing 22 but again, with no success so back to a working 21.4. I also have a Nexus 7 2013 and it is working flawlessly with the new Magisk 22.

I am having the same experience.

I did check the time zone before I posted here. The time displayed is an odd number of hours and minutes, not something like a different time zone and the date is way off too. The tablet displays everything correctly when it is running. UPDATE: I tried installing older versions of TWRP and...

Actually, I'm using the LOS 17.1 November build.

Incorrect time and date I thought the newest build, 3.4.0-4 was supposed to have fixed the incorrect time and date situation but this build on my SM-T330NU is still listing them wrong. I have not added any Magisk modules until I hear back that is the fix I really need.

The downloads are mixed up for millet devices. I found the milletwifi build in the millet3g file and the millet3g build is in the milletwifi file. I'm not sure if any other files are swapped.

I'd love to try the Develper Option route but I cannot access any settings as I mentioned in my post.

No such luck for me. I reinstalled the newest 17.1 build for milletwifi and I still cannot open settings or pull down the file to choose between charging, file transfer, etc. Since I did a dirty install I'll try a clean one and see if it works.

Same with millettwifi, also the pull down to allow charging, file transfer, etc. does not appear to be working.

Regarding the most recent 17.1 build and TWRP, my SM-T330NU is booting properly and it is functional and stable. I've been using these ROM's for several months and have had a few problems flashing, rooting, and booting over that time. In each case, DJABHiphop and Matteo have worked through the...

After having ROM flashing problems on my milletwifi with TWRP versions 3.4.0-0 and 3.4.0-1, I flashed 3.4.0-2 and it works with no problems so far. I haven't tried restoring anything but the flashing and backup works great.

I couldn't flash the new August milletwifi build with the 3.4.0-0 or 3.4.0-1 TWRP because it didn't recognize my tablet as being a milletwifi, no problem with the 3.3.0-0 TWRP. Matteo suggested some file modifications but I am not experienced with the terminal and I couldn't get the file to...

When I dirty flash, all I ever clear is Dalvik and cache.

Yesterday I dirty flashed the July update on my milletwifi and everything is running normally with gapps and Magisk and I have had no problems.

I have the milletwifi (sm-t330) and am using Magisk 20.4. When I flashed the newest build there was an add.on that flashed Magisk. However, when I booted the tablet and checked, Magisk wasn't flashed. I just rebooted to TWRP, flashed Magisk, rebooted the tablet and everything is now fine and...

I downloaded the module from the XDA site and flashed it. However, my sm-t330nu (milletwifi) running the May 17.1 build and Magisk 20.4 still does not have root and Magisk Manager says Magisk is not installed. Everything worked fine on the April 17.1 build so I'l try going back to that and see...

I flashed the most recent 17.1 build for milletwifi and now Magisk will not work. I did a totally clean flash and Magisk appeared to flash in TWRP but once the tab boots Magisk appears as not installed in Magisk Manager. I tried re-installing a couple of times but the problem persists. I had...

For some reason, I do not believe this build supports that function.

Quote: Originally Posted by 0BrokenBone0 The version of the tablet doesn't matter. It's all the same. What does matter is that It only shows when the tablet is locked by a smart cover at least once. After that It's the last setting in the list. Otherwise It will only show some bluetooth settings.

I am running the most recent 17.1 build on my SM-t330NU and I have a smart cover case. My tablet continues to stay awake even though I close the smart cover and it requires me to manually press the power button to put the tablet to sleep and wake it up. It wakes upon receiving a notification...

Yes, I have an SM-T330NU and have been successful in flashing 17.1. However, make sure you have the newest TWRP installed and, unless you have different results than I've had, don't expect to root or install gapps on your tablet. This 17.1 build is very quick and smooth and I'm sure DJABHipHop...

Try unplugging the charger and then turn off the tablet.