Search results

  1. J

    Post General Medeke/Navifly 7862

    It's an account flag, all done on Google's end. It gets enabled without having to update any app. If you have a rooted phone you can enable it but it disables again after a few hours. You need to wait till Google enable it on your account, or join the Android Auto beta programme. The coolwalk...
  2. J

    Post [ROM][UBUGNL1][17Jan] Omega v61◄●4.3●►Fully Modded◄●●►Omega Files|Themes◄●

    Good luck with that. It's a 10 year old ROM and the developer hasn't posted here in over 5 years.
  3. J

    Post Android head unit problem

    You need to look in the about device section in the settings on your head unit and find the MCU. I think a PX5 can also be an MTCD device? but check your MCU anyway.
  4. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Your unit is a TS10 and not an FYT. Similar hardware, different software and firmware. None of the scripts in this section will work on your unit. This is the wrong section of the forum to be posting in for your unit.
  5. J

    Post Hardware Development TEYES CC3

    Yes you can rollback. What did you find on the firmware you didn't like?
  6. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    FYT have crippled Bluetooth and USB on these devices. I would not be surprised if a USB mic didn't work.
  7. J

    Post Software Development [Dev] New "NavRadio+" ported to UIS7862 and sc9853i FYT devices.

    And just like that a Play Store update to version 0.2.78b fixes it 😁 Excellent support thank you.
  8. J

    Post Software Development [Dev] New "NavRadio+" ported to UIS7862 and sc9853i FYT devices.

    No. I just restored the original radio app and it moves in 0.05MHz steps. Edit: to clarify, the Basic (free) Navradio app does the same as Navradio+. It also moves in 0.20MHz steps.
  9. J

    Post Software Development [Dev] New "NavRadio+" ported to UIS7862 and sc9853i FYT devices.

    Checked it a dozen times. Sitting in front of the radio as we speak. Just cleared data on the app. It starts off set as Europe with the same behaviour. Edit: could anything in the 6315_1.zip change this behaviour? I reflashed my unit with a modified Teyes firmware earlier. To add, every...
  10. J

    Post Software Development [Dev] New "NavRadio+" ported to UIS7862 and sc9853i FYT devices.

    I reinstalled Navradio+ today after wiping my headunit and now scanning through frequencies is moving in 0.20MHz steps. It's jumping from 97.1 to 97.3 to 97.5 etc Previously it moved in 0.05MHz steps. My region is correctly set as Europe. Has something changed in the app or am I doing...
  11. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    I'm not using a Mekede firmware. I'm using a 6315_1.zip from Marios MD firmware and a custom AllAppUpdate.bin with some Joying apps inside. I compared my current 6315_1.zip with the Teyes 6315_1.zip The updater-script file located at "META-INF/com/google/android/" on both copies creates the...
  12. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Quick question for those much smarter than me. Can the 6315_1.zip from Teyes most recent update be installed on a non Teyes unit? They are supposed to be interchangeable between units but the Teyes file is much bigger. Looking inside the .zip it looks like the bigger file is caused by a file...
  13. J

    Post MEKEDE M6Pro Plus with 2k (2000x1200) screen

    There's no option to buy it directly no but if you ask for the HDMI IN before purchase they will tell you to purchase it and send you a bill for the extra amount. It's the same way the 360 camera works. Mekede need to order the additional components. They are not very clear. If it has fake...
  14. J

    Post MEKEDE M6Pro Plus with 2k (2000x1200) screen

    That doesn't come as standard and you need to ask for it and pay for it before ordering, like the 360 camera.
  15. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Not a typo. persist.audio.mic.senstivity is correct. It's how it was on my pre installed firmware and every firmware update I've downloaded.
  16. J

    Post Question uis or other with FAP on the car

    It's not something I have much experience with. I have only connected my Bluetooth ODBII connector a couple of times. I just know that the ODBII port shows much much more engine/diagnostics info than the 2 canbus wires that connect to our FYT units.
  17. J

    Post Question uis or other with FAP on the car

    I think FAP is like a DPF or similar. It looks French (filtre à particules). Anyway, these units can only show info that the canbus sent to the OEM head unit. If your cars canbus does not send that info over the wiring loom that runs to the head unit then there's no way for the FYT unit to show...
  18. J

    Post Question Android upgrade Gps problems need help please

    1. There's is no upgrade to Android 11 or 12. These FYT 7862 units only go as high as Android 10. That may change in the future (maybe not) but any that you see say Android 11 or 12 it is fake (like mine, fake Android 11). 2. Are you using a GPS receiver that you got with the head unit or are...
  19. J

    Post Software Development [KERNEL] FYT 7862(a/s) kernel MD-EDITION with FMC

    Thanks for your work Mario. I have the initial MD Edition 1.0 running at the moment. Does this release have a version number? I'll update to this in the morning.
  20. J

    Post Question Problem with AA and Carlink fixed on my Navifly M700S

    Spotify needs to be installed on your Huawei P30 to work with Android Auto. Remember Android Auto is running the apps on your phone and not the Spotify app installed on the heat unit. You may need to open Spotify before starting Android Auto. I think the only way to have wireless android auto...
  21. J

    Post Hardware Development TEYES Australia

    On the 16 pin power connector that connects to the head unit pin A7 is the ACC wire. Check your cars wiring and see if your cars ACC (ignition) wire is connected to the head unit ACC wire.
  22. J

    Post Hardware Development TEYES Australia

    Teyes Australia can only support purchases made through the Australian site (they are separate businesses). Have you confirmed the ACC wire is connected? You can have 12V to the head unit but it needs the ACC (Ignition) wire connected to trigger the unit to turn on when the car is turned on...
  23. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    In config.txt file I have the line "ro.fyt.launcher=com.android.launcher22" And inside my AllAppUpdate.bin inside the App folder I have a folder 190001022_com.android.launcher22 containing the launcher apk file 190001022_com.android.launcher22.apk If you are missing any of these then you may...
  24. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    I find these units are very picky about accepting AllAppUpdate.bin files. Your unit is rejecting yours for some reason. I use no compression (fastest), create a .zip file with password, and then rename the .zip to .bin. You could also try with a different app instead of 7zip. It's trial and...
  25. J

    Post Hardware Development TEYES CC3

    Seems the guy in this video does a lot of different things to his unit. At what time in the video does he disable the internal mic? I can't find any part where he covers a pin on a ribbon cable.
  26. J

    Post Hardware Development TEYES CC3

    This is a bug with the home screen launcher window. Waze (or any other navi app) will work perfectly if you do not set it as the launcher app.
  27. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Updating the MCU does not fix issues with missing canbus functions. It would need either.... Selecting a different vehicle make/model, updating the canbus, or using a different canbus completely. Updating the MCU is more likely to break something than it is to add missing canbus features.
  28. J

    Post Hardware Development TEYES CC3

    How big is the dash cam or how small is the rear view mirror? Isn't there room for both with the GPS antenna offset to the side slightly? In my experience you won't get a reliable GPS signal by placing the antenna somewhere that doesn't have clear line of sight to the sky.
  29. J

    Post Question Ekiy T7 (Uis7862) any firmware update?

    You've replied to a 4 month old reply to a 1 year old post.
  30. J

    Post Hardware Development TEYES CC3

    The cheap GPS unit that comes with these radios is in my opinion, rubbish. Mine is still in the box and will never be used If your car came with an original GPS antenna then it's best to use that. All I needed was a Fakra C Female to RP SMA Male adapter. If your car does not come with a GPS...
  31. J

    Post Question Which UIS7862 unit should I buy?

    My Bluetooth connects immediately every time I enter the car. I also find FM radio to be excellent using NavRadio+ AF isn't a deal breaker for me. I only have 1 station that jumps between frequencies occasionally (BBC Radio 2) and Kotix workaround is intuitive and easy to use.
  32. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Is the climate controls on that car not a separate panel on the car, below the radio? You won't be able to control that with the Mekede if it is not a function of the original radio. The only 2 functions I have are steering wheel controls and reverse camera. There is nothing to fix though as...
  33. J

    Post Software Development [Dev] New "NavRadio+" ported to UIS7862 and sc9853i FYT devices.

    I've never enabled USB debugging and managed to remove the original radio app no problem. It should be a FAT32 formatted USB drive with the following on it... a folder "BACKUP_RADIO_APK" a folder "lsec_updatesh" a file "lsec6315update" a file "lsec6316update" a file "lsec6521update" These...
  34. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    I'm pretty sure things like RPM/Fuel display can only be displayed on these HU's through the OBDII port. Same goes for engine temperature. External air temperature can be shown through the canbus only if your OEM stereo supported this and only if the car sends this via canbus. That's the same...
  35. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Can anyone tell me why my unit might be giving an error when trying to run the backup script in post #4? I've ran the backup script many times in the past with no problems.
  36. J

    Post Software Development [Dev] New "NavRadio+" ported to UIS7862 and sc9853i FYT devices.

    You get this every time NavRadio+ is updated in the Play Store (same for any other app added on the home screen). The developer is very active and releases frequent updates meaning this will keep happening. You will need to keep adding it back manually each time or disable automatic update for...
  37. J

    Post Question T'eyes CC3 Power source for the rear camera

    The camera should primarily be connected to the F port. I assume this is the case yes? G3 is for the ACC key wire and G5 is the camera detection wire. Your car harness SHOULD be using these ports, they aren't supposed to be empty. As your reverse camera works but isn't triggered automatically...
  38. J

    Post Software Development [Dev] New "NavRadio+" ported to UIS7862 and sc9853i FYT devices.

    Tap the speedo once to change the type of display
  39. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Thank you for this idea. I now have the new Android Auto working (though I very rarely use it). Does Google Assistant read your notifications in Android Auto? Mine does not. Updating other newer files in the joying AllAppUpdate.bin has also got the new settings working on my unit though it...
  40. J

    Post MEKEDE M6Pro Plus with 2k (2000x1200) screen

    The version of Bluetooth going from 5.0 to 5.1 will do nothing at all to improve the sound quality of a microphone.
  41. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Thank you for the detailed response. However this isn't my issue as I installed the updated settings apk with twipe_all and not twipe_cache. Seems it just isn't compatible with my mekede (116) unit while showing canbus settings.
  42. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    I rolled back to my original 190000000_com.syu.settings.apk and the canbus options have returned.
  43. J

    Post Hardware Development TEYES CC3

    I get this issue when Waze is set as the mini screen app on the homepage. Try changing that to another app and try Waze again. It happens in every version of Waze so downgrading doesn't help.
  44. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    It's inside the AllAppUpdate.bin from your backup. My canbus menu has also gone blank like yours (also a Navifly 116 model). Everything still works just the option to change vehicle for the Canbus is no longer there like in the image above. I'll try reverting this afternoon to see if it fixes it.
  45. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    The mic option is there for me now on my Mekede M500s after updating com.syu.settings. Thank you Mario.
  46. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    That explains it. I was worried about flashing another vendors allupdate.bin. I'll give this a try later. Hopefully I can get my OEM mic working. Thank you for the quick answer.
  47. J

    Post General General FYT based Spreadtrum uis7862 (unisoc ums512) - Q&A, Mods, tips, firmware

    Has anyone successfully added the new "use external microphone" option to a Mekede M500s? I've updated my unit with the latest 6315_1.zip update from Joying but the option still isn't present. I also tried Mario Dantas MD Firmware but that also didn't have the external microphone option.
  48. J

    Post [Dev] New "NavRadio+" app for TopWay based units: T3 and T8Allwinner, TS9 (intel), TS10(UIS7862) and TS18(UIS8151)

    Just purchased the app and I think it's great. Only complaint would be the display showing kmph instead of mph. I believe this is due to me selecting Europe as the radio region. I'm in the UK. Selecting USA as the radio region changes the speed displayed to mph. Are there any negative...
  49. J

    Post [ROOTED] How to get root using Magisk for HU (Allwinner T8) with V9.2.2, V9.3.1, V9.4.1

    Would this method work to root my HU? The device details are: t8_p2-eng 9 PPR1.181005.003 20190918-174618 test keys T8.3.19-24-61-946101-190916 V9.4.1_20190920.092905_AKW1-FD Unfortunately I'm unable to find the original firmware for the device. It was already fitted to a Kia Sportage I...
  50. J

    Post Brightness lowered after update to V12.2.4.0.RJKMIXM

    That's V12.2.4.0.RJKEUXM you have linked. My non EU model has V12.2.4.0.RJKMIXM available which is a stable build. Edit: so that site also lists V12.2.4.0.RJKMIXM as a stable beta. It isn't, it's a stable release.