Search results

BS Net Blocker v2.0 To those interested, i have updated BS Net Blocker 2.0 to support BS3+.

Hi iamnotstanley, to answer your question: If i recall correctly i did explained about the problem in my thread earlier - the problem lies on 3C KK kernels. (MTK variant only) H30-U10 stock KK kernels do not permit writing to the boot partition (/dev/bootimg) directly, the partition is mounted...

I see, well, if you ever need to unlock before you are allowed to flash, or need to install modem patch after installing CN ROM, then you probably have the Intl./EU set. Judging from the available informations we've got so far, 3C variants differ mainly on digitizer & modem hardware, or the...

Normally, you can still use "Download" mode when "Upgrade" mode failed, alternatively, try your luck with Force Upgrade using sdcard. hmmm, i have no idea why recently there are so many reports of this error... may i know which ROM you were using before getting this error? It's likely you have...

Hi there, i believed you are in the wrong thread, your phone (G630-U00) is not a MTK powered phone, it's a Snapdragon 200 phone, thus my thread & guides are not applicable to you. Most Snapdragon devices have 'fastboot' enabled, which you can use to revive your device by restoring the exported...

Not a problem, you can still use SP FlashTool as long as your phone still responding. Please make sure you have the correct MTK Preloader driver installed, or try install Hi-Suite, like provided in OP. This could happen if you have incompatible kernel/uboot installed, you will have to find the...

I am afraid no, the tools has been optimized for Honor 3C only and it checks for specific data in the dump to ensure it's the correct one. For other devices, you will have to find other solution, there are fews in XDA like perl or python scripts to split the dump, etc, try to search. Either way...

The needed file is part of the backup that must be made by yourself when the IMEIs are still working. Unfortunately, the MtkDroidTools method WILL NOT help you to fix your IMEIs, atleast not the way you wanted. It's works by restoring the NVRAM backup that you made with the tool earlier, same...

Link to main thread: [GUIDE] Huawei Honor 3C H30-U10 - Bootloader Unlock, Root, TWRP, CWM, KitKat Follow kernel.killer advice HERE, that's the correct steps. If you don't have motion control that means you used the wrong ROM, get the right ROM or check post #8 for old guides & needed patches...

H30-U10 V100R001C432B306 for EU sets UPDATE: H30-U10 V100R001C432B306 for EU sets has been released and download links added to OP. * This ROM is designed for EU sets only, other variant might get a cust_error if you attempt to install it. * This upgrade might relock your bootloader and cause...

Your system partition might be corrupted, have you tried formatting the partition with TWRP first? If that doesn't help, try to flash any extracted stock ROM using SPFT, that should fix the problem in most case. If nothing work, try Full Format Except Preloader with SPFT before flashing SPFT...

Yes i am aware of the recovery, i can make TWRP work without replace update-binary too if i want, but some features have to be sacrifice. Since 2860 i have made TWRP auto replace update-binary for known binaries, however some ROMs use binary from other devices/tools. Not sure about camera, for...

Hmm, as far as i know OTA is not possible due to hardware limitation, eg: no or not enough power supplied to external device. You can try USB 'Y' cable with external power supply or USB hub, however i am not sure if that will work or not, i haven't tested it myself. I have seen your ROM...

NOTICE: Indonesia users, Huawei Indonesia has added new B320 update package for you local set, please use that instead of earlier B320. The download links have been added to OP, file seems to be smaller, 820.6 MB, i am not sure what has changed at the moment. EDIT: Nevermind, both file inside...

synius, i think you may have misunderstood me for what i said on this post. The null stripping procedure was an example for preloader, and ONLY applicable for preloader. Based on the tests made by TripFX earlier, i have concluded that you DO NOT need to strip null chars for other images. It's...

AFAIK Art is not possible on 3C EMUI ROMs, most probably because some EMUI system apps are not compatible with Art yet. Please, don't just say "Doesn't work", try to explain in details what happened so we can provide assistant. Also please make sure you computer is ready for SPFT, you can...

The voice record feature can be enabled by changing build.prop value: ro.config.hw_voicerecord=true However, even the feature is now there, it still didn't work for me, i guess something else is missing, i haven't have time to dig further. The above mentioned situation is called 'bootloop', and...

1) Yes 2) Yes, but i cannot guarantee the ROM is 'problem free', because i didn't made it, and i don't have the same device as you have. 3) I cannot speak for them, those two are leaked & dumped by users, while B320 was comfirmed by our local support site for MY sets. 4) New users with less than...

I see, too bad i can't tell about B266 as i never try that ROM, but a quick check on B320 does have your language support. The ROM can be tweaked to work on your phone, but like you said this might not be a option for you since extra works would be needed. Well, let's just wait some time, there...

GUIDE: Installing EMUI 3.0 B320 THESE ARE SIMPLIFIED GUIDES, PLEASE REFER TO OP FOR DETAILED INSTRUCTIONS. SOME FACTS ABOUT B320 * This ROM is a country/region specific ROM and it's customized for Southeast Asia countries ONLY. * This doesn't mean users from other countries can't use this...

1) I don't think updating the baseband would help in your case, more like a ROM issue, the switching threshold used could be too low. 2) Yes you can use CWM provided the ROM replaced with my fixed update-binary (but i am not sure if it has), also i recommend & will support TWRP only atm. I bet...

You will need to flash SuperSU as other superuser app might not work properly, please refer to OP about obtaining full root. There are quite a number of pictures in the main guides, why don't you spend some time to read? The steps are pretty easy to follow actually. You can check your 3c...

H30-u10 emui3.0 v100r001c900b320 Announcement: H30-U10 EMUI3.0 V100R001C900B320, for International Sets, optimized for Southeast Asian countries is now available. ~ Malaysia, India, Sri Lanka, Viet Nam, Lao People's Democratic Republic, Cambodia, Nepal, Myanmar Download links have added to...

So TripFX informed me about his tab, sad to hear that, but at the same time it might be a good news too as we wasted too much time on it. synius, regarding the dumped files, i mentioned it long ago that you can not use it directly as there are some post-processing jobs needed. For example...

Yes you can just flash B111 recovery and perform Force Upgrade after that. It's normal if the ROM is using incompatible modem, also please DO NOT flash ModemFix without first checking if IMEI is working. As for the force closes, did you forgot to perform 'Format Data' with TWRP? This should...

Which module are you trying? I will see if i can find some time to try later. It's more than just new digitalizer in new kernel, there could be lots more, but please be reminded when official comes things could be different. I supposed you can Force Upgrade to any version as long as the...

Try this code maybe. Nothing wrong, it's like that, like i said it's possible but very tricky, i would advise you to stay with unlocked and don't flash signed unless really necessary. If you must get back to B108 signed, try Full Format Except Preloader, restore NVRAM then only flash B108, but...

Getting IMEI on back on locked B108 is very tricky, i had to first revert back to B115 before B108 to get the IMEIs working last time. It's recommended that you restore the original NVRAM backup before you unlock the phone, flash B108, and perform a Data Format with LiveTWRP before booting. Also...

Sorry if it didn't work for you, did you check that time if the file you downloaded was the correct one with 141.05 MB? So how's the 9.X 'crap' going? I heard 9.x is no longer a crap and it works much better compared to earlier 9.x version. Yea, i am afraid it's gone now, not sure why. But...

How to upgrade to EMUI 3.0 B301 / B310 THESE ARE SIMPLIFIED GUIDES, PLEASE REFER TO THE FIRST PAGE FOR DETAILED INSTRUCTIONS. SOME FACTS ABOUT B301/B310 * I believe both ROMs shared the same base, except they are customized for their own (specific) region. * CN ROMs use a common presets for...

Just like it's name, FullRootHelper is needed to get full root on KK ROMs, otherwise you can only get half-rooted even with SuperSU installed. I supposed B310 should works better with International sets, however at this stage all these ROMs are all unofficial and might be lack of needed...

Emui 3.0 b310 Ok guys, Looks like this B310 is pretty much same like the B2XX, only that it comes with some gapps. I was little wrong about this build, yes it's built for International sets but only for specific region as presets for most countries are not available. To have it use the EMUI...

Yes, you can flash ANY ROM, ANY VERSION with SP Flash Tool, but B301 beta is optimized for EU set, while B310 beta is for International set. I will write a simple step on main thread soon, please check later. [/HIDE] I will write a simple step on main thread soon, please check later. B301 beta...

Replaced the buggy recovery with TWRP 2.8.6.0 for Huawei Y536-A1, which should fix the horrible mis-aligned buttons & text. This is how the recovery supposed to look like.

V100r001c900b310 Guys, I believed the one just released on EMUI website could be the first EMUI 3.0 for International sets, NOT for CN sets. H30-U10_EMUI3.0_Android4.4_V100R001C900B310.zip (843.9 MB) Judging the file size of the package it could comes with Google Apps too! Currently...

Bootloader will remain unlocked if you flash with SPFT, after all you can only flash this with SPFT if you are unlocked. While for update.zip package, i haven't finish downloading it yet, but preloader will be updated in the uprgade process, so i can't tell for now. I was told standard TWRP...

KernelSwapper V1.0 for Honor 3C H30-U10 KernelSwapper V1.0 What is this? * Designed for 3C H30-U10, this patch allow you to swap/change your current kernel by flashing this patch with TWRP. * Some kernel might not work properly on your device (unstable/bootloop), in this case please restore...

Heh! this is gonna be fun, i will do some comparison tomorrow! Thanks a lot for the files! If everything is going well then i will use kernel from this version to create patch for other custom KK ROMs. Hmm, does the issue really confirmed on B266 only? How about charging while fully powered...

Sorry, i guess i am a little bit late, Actually the OTA file should be downloaded to your 'sdcard' under a folder '/HwOTA/' if i am not mistaken, one can grab it before it reboot. kornis01, just remove 'NoDL' from public upload, you must keep that folder if you haven't created backup before...

TWRP 2.8.6.0 Non-SELinux Version Those who use TWRP 2.8.6.0, You should be able to install any rom without problem if you read the notes on my post carefully, regarding update-binary. The latest TWRP 2.8.6.0 i shared was build with Full SELinux support and it uses the latest EMUI 3.0 KK...

No you can't at the moment, you have B129 which is probably an upgraded version from B127. all 4.4 we have is not compatible, perhaps the europe beta test ROM will be, let's wait and see. Once unlocked you will remain unlocked unless you flash signed ROM again, so you are still unlocked. I have...

Guys, thanks for all the uploads, appreciate that. But now i am getting more confused, because some uploaded files do not match your firmware.info or other provided info. synius, both your readback posted here and here are same, is actually the V18-V2.10.0, not V38 as claimed. leetree2001...

Hi, what error did you have? try look at the detailed compile log to find out the error, but since i am not able get it boot my steps was wrong too. I would suggest you to read last few pages on "Cyanogenmod for mediatek devices" since there is lots of useful informations there, good luck...

Mirrors for BlueStacks v0.8.11 BSMultiTool is now deprecated (outdated) and should not be used with newer version of BlueStacks. To mod your Bluestacks 0.9.x, i would recommend you guys to visit/join the following facebook fans group: #FreeStacks, #BluestacksID They have more updated tweaking...

Guys, thanks for sharing the ROM dump, we are still analyzing the files, until then V38 users please don't use/flash any of the files. Meanwhile, can someone help me to test new twrp recovery for V31? Hopefully the touch works, otherwise someone will have run Magic TWRP to get correct...

Actually what i am missing is the actual ProjectConfig.mk & kernel configs used to build KK kernel, the once provided in source seems to be the common one. But no worries i will try harder and get some help from master sifu on xda. ;) Hmm, can you grab me the TWRP log file, lots of things...

panel1, kekkox88, thanks buddy! i really appreciate it. cheers! :highfive: But i think i need coffee more than beer nowadays... ;) Ax1qwer, booloth, thanks for the /proc/cmdline output. Looks like newer sets use cmi_otm1282a while our's use auo_otm1282 (Pixcir ICs) I have spent the whole...

TWRP 2.8.6.0 for Honor 3X (MT6592) TWRP 2.8.6.0 for HONOR 3X G750-T00/U10 Hereby sharing TWRP compatible with all Honor 3X G750-* variants with MT6592 chip. You can find the official change log for TWRP 2.8.6.0 HERE, below are some notable changes since my last ported TWRP 2.8.1.0: * Now you...

UPDATE: Guys, there was a bug in update-binary and this affect all TWRP 2.8.6.0 builds, please re-download, sorry for any inconvenience caused. Thanks for your support. :highfive: To get the info you will first need to have drivers installed & adb setup in your system, you can use...

I haven't check the kernel source yet, but i will see if i can find some free time later and try to compile the kernel. The kernel source is for EMUI 3.0 and that ROM does not work on devices with new touch so i doubt they will include the driver in the source too. Let's see how it goes... but...