Search results

waiting for your tmo to us oem conversion guide! thanks

link expired, any other link?

is casting working on the June 14th build for anyone? when I select a device to cast to, the screen turns black on the Chromecast display and then the tablet disconnects a few seconds later...

heres a logcat of a stock android 11 beta one plus 7 with working smart home controls in case it helps https://pastebin.com/Qmzq5RjV

now playing and google smart home controls still not working, the google smart home controls at least shows up now, but clicking on any of the items, or ANYWHERE on the screen (except for the power controls at the top), it closes the window and goes back to the home sreen. EDIT: holding down...

great job! Is there a way to get "now playing" song detection working on the lock screen? "Show songs on lock screen" toggle can't be enabled. also, when on the new android 11 power menu, the "Device Controls... Add controls for your connected devices" and GPay don't work when you click on...

I can pull 400mbps on my note 9 from sprint lte... Faster than spectrum at home...lol

zsl7 just released, and installed.

waze and maps work fine for me on the ui 2. 0 beta for n960 U1

got it on my unlocked unit on sprint... anyone get volte working?

if you know mandarin, bottom right of page. https://web.archive.org/web/20170612014218/http://www.carsql.com/

FYT doesn't deal with anyone who doesn't have a current reseller contract with them. you will get no where contacting them. we have tried. your best bet is dealing with the reseller and having them send feedback to FYT

Most units have that header empty with no connector. It is used in some China specific models for special panel controls, in the Sofia units...newer models not so sure.

It's for composite video output. Some models have a pigtail for headrest monitors etc.

Anyone know how you force volte on for Sprint n9 pi beta???

I don't get the message saying thanks, it just goes back to the main screen... I clicked register like 5 times lol. No update so far 30 minutes after... Anyone else see this?? Update, had to clear data on the Samsung+ app, now I saw the toast message.

I've tested this on the 5009 and 6026 with NO fan extensively, but then all CPUs are not binned alike so some may perfom worse under max clock. How did I test? On a sunny HOT day with the car direct in the sun with Max clock locked running loadgen on the command line. Survived for 6 hours on...

Yes, the boot image recreates the init.rc files on every boot, there is no way to remove the persist without re creating the boot image.

OP was updated with files and directions for crk1

Nope, you have to use one targeted towards the arm platform. Been traveling the past few months for work, I'll see if I can dig up my twrp image.

You can't use the joying recovery to install the zip, the joying recovery DOES require the zip to be signed. Use twrp. In my notes I was referring to the hardware itself, not the joying recovery

Well calling plus or VoLTE, similar end result right? for the most part, and no, the calls do not go through 1x. Data would not work on a call if the radio was using cdma 1x. This is not calling plus, but the VoLTE routed through 310-120(no qos) instead of 310-538( qos enabled vlan) Calls...

Enable wifi calling, test it, make sure it works, then flip the volte toggle ON. You will get the error. Turn WiFi off. Try to make a phone call , and run a speed test during the call, it should still run data during the call.

I was on whatever rom came with the phone when I bought from Samsung.. Then flashed the rom in the instructions to install the Android 9 pie J1 firmware. Before I had a Samsung splash, now I have a Sprint splash.

You have to use shortcut master to launch the activity manually... VoiceNetworksActivity...see screenshots. The old activity shortcuts no longer work on Pie. http://imgur.com/gallery/ukz6Ttx

Also, try ##OMADM# enter msl 000000 select production server select to ok. You can try also to update profile??? Or try scrtn again

Try ##SCRTN# on the dialer

What the heck are you guys talking about???

It was not before the Android 9.0 update... Android 8.1 did not show any branding, but the Android 9.0 does. Similar to how the Samsung s8 was when you could switch carrier branding on the fly

Installed on my u1 unlocked, did not flash to Sprint Oreo.

A big YES!!!! I just tested it!!! RCS works. Typing indicators, delivered and read indicators, it works in the Samsung messages app.

Works great...wifi calling works, carrier branding with Sprint logo on boot...WiFi calling works...strange that the install did not wipe my user data... VoLTE works by default...maybe enabled after I enabled wifi calling??? For outgoing and incoming calls...very stable...though my dark theme...

Looks like the apn shortcut on Android 9 is gone...I just installed the beta on my unlocked note 9 I got from Samsung...wifi calling works ... Volte works by default...some how... I can't figure out how to edit the apn for hotspot. Anyone else try?

In progress.

Obly Works for the Google messaging app, on Sprint out of the box for the n9 unlocked version. I don't think Samsung will be doing rcs support any time soon

The delay is only for multiple taps.

Ha uses a different wifi chip, are you sure that the FYT RTL chip has diversity?

The working theory right now shows this might be caused by unstable voltages during installation...just as a precaution I'm going to release a new version of custom with some changes that will clock the CPU down.... And see how it effects installation time and stability...

Thank You! Much appreciated! The work that I do on these units, the countless hours spent debugging and reverse-engineering, really my hobby, and done for the community so everyone may get some enjoyment, instead of frustration, from our devices! I spend a lot of time driving, so for me it's...

Here's how we handle clock speed during installation of the gtx rom: once TWRP is loaded, we increase the clock speed to max, for the duration of the installation. [ on 5009 this would be about 1ghz, and on 6021 this is 1.2ghz. ] During my testing, with both 5009 and 6021 units, we ran with...

Very cool! If you need someone to test, always willing! I currently work on some ROMs for the Chinese based unita, but an opensource aosp unit has always been the goal (*_*)

Makes sense! Well, great work anyways. Are we going to see any pictures anytime soon??? I have some empty 2 din cases,and A hikey960 I would love to try this on

No support for lvds for the LCD? That would eliminate needing an HDMI converter. It's also seems off that as designers you did not ask for input from the one community who this is targeted to, XDA...the point is to dig into the market currently dominated by the poor quality ODMs of Chinese...

Can you use the custom app to reinstall the stock recovery and see if you still have the issue???

Hello all, I see some folks have issues with 1GB units... I completely forgot that these Sofia devices existed... So i never did any testing on them since i didn't have access to a unit. I'll look into it, and check if there are any software differences between these units. Just to ask, which...

work on this rom has paused until I can afford to purchase another SoM... unforseen circumstances lead to the SoM being damaged =(

surfer63... could you assist? is there a way you can upload a full partition dump of all partitions minus system data and cache? ---------- Post added at 08:27 PM ---------- Previous post was at 07:54 PM ---------- there is...sort of. There is a "MASK ROM" loading mode...but I'm not sure...

The px5 is very well documented due to it's age, though on our SoM, there might be something else that reboots the CPU if there is no valid recovery or system partition. The mistake I made was to flash a non bootable recovery partition while the system partition was blank (never ever do...

ouch! my PX5 is D E A D !!! very sad =( made a stupid mistake and flashed something to the wrong partition! work must stop for now =( grrr! ;(

Can you look at the file fyt.prop in /system/app and post the contents ? It will help as I am designing my custom app to detect the mcu ID and restore it on installation to avoid MCU mismatch errors that were present on the Sofia platform