Search results

  1. BuLLeT_93

    Post [KERNEL][MIDO][Oreo/Pie] ElectraBlue Kernel 21.0 - July 06 - Redmi Note 4

    Hi dev, i've flashed this kernel from first release to 2.0, but i've the same problem from 1.0, the frequency stuck at 1689mhz after some hours, stock settings (except i/o maple), aex 4.5 clean flashed. Tried reboot, reflash of rom/kernel, but nothing. Here the logs...
  2. BuLLeT_93

    Post Faust Kernel for 7.1.2 Mido FInal [Discontinued]

    I'm using Cultivation on my Kenzo and it work good, same as interactive with screen on and a little bit battery friendly with screen off. Many governors are outdated and not designed for this new cpu's, then we don't need 200 governor, quality over quantity ;)
  3. BuLLeT_93

    Post Faust Kernel for 7.1.2 Mido FInal [Discontinued]

    The kernel is perfect, we don't need QC (more dangerous for our soc than the SD650, it can break usb port due to lower nm). Same for the governors, interactive is all what we need, the other 2 that can be good for SD625 are Cultivation (Interactive with tunables for screen off) and ElementalX...
  4. BuLLeT_93

    Post [ROM][7.1.2_r36][OFFICIAL] AospExtended ROM V4.6 [OMS/DUI]

    Here: http://www26.zippyshare.com/v/EiTPDnb9/file.html Remove G Dialer, put Dialer.apk in "/system/priv-app/Dialer/", set 644 permissions and root/root for owner. Then reboot and enjoy.
  5. BuLLeT_93

    Post [ROM][7.1.2_r36][OFFICIAL] AospExtended ROM V4.6 [OMS/DUI]

    Which build are u using? On official 4.0 no problem as you can see Try to wipe system and data, then reflash the Rom
  6. BuLLeT_93

    Post [ROM][7.1.2_r36][OFFICIAL] AospExtended ROM V4.6 [OMS/DUI]

    It's not hard to find, Open Dialer -> Settings -> 2nd Entry and see the magic ;)
  7. BuLLeT_93

    Post [KERNEL][LOS-N/O] 28-06-2018 AGNi 🔥 pureLOS-N/O v13.0

    The new toolchain seems magic bro, awesome :D psndna88
  8. BuLLeT_93

    Post [KERNEL][04-02][Radon Kenzo V6.3][STABLE][CM-AOSP-MIUI]

    For the audio related problems try to flash this zip, i've solved with this. Make a backup of "etc/mixer_paths_wcd9326.xml" just in case. https://mega.nz/#!09gEiKhb!uroqYqHyhDSVCRRlLpg_G709fQ6VKlOqWuR02iGw7ZM :thumbup:
  9. BuLLeT_93

    Post [KERNEL][LOS-N/O] 28-06-2018 AGNi 🔥 pureLOS-N/O v13.0

    For who have noise in headphone try this file, replace in etc/ folder and set permissions to 644, then reboot. https://mega.nz/#!sopEEYxb!IaBxNMtHqe0A8rXXkA7etse4fLaf1X24senBcvxDlQM Make a backup of the original file just in case!
  10. BuLLeT_93

    Post [KERNEL][LOS-MM] 09-10-2017 AGNi 🔥 pureLOS-MM v11.0

    Hi man, can u add Maple I/O Scheduler in next release? I'm using it on secondary phone (nexus 5) and seems to work better than Tripndroid (my preferite). Thanks a lot for your work, this kernel is amazing :D EDIT: Wrong post, i use Nougat!
  11. BuLLeT_93

    Post List Accessories (Case,...) for Kate Version (Redmi Note 3 Pro Special Edition)

    Received today (2 months from Aliexpress :banghead: ), fit perfectly...
  12. BuLLeT_93

    Post [KERNEL][LOS-MM] 09-10-2017 AGNi 🔥 pureLOS-MM v11.0

    Miui version: http://forum.xda-developers.com/showthread.php?t=3468042
  13. BuLLeT_93

    Post [KERNEL][LOS-MM] 09-10-2017 AGNi 🔥 pureLOS-MM v11.0

    +1, touchscreen stuck and i've to reboot. Fingerprint (FPC) work fine here! (Kate with Exodus Rom MM)
  14. BuLLeT_93

    Post [KERNEL][LOS-MM] 09-10-2017 AGNi 🔥 pureLOS-MM v11.0

    Hi agni, i'm using your kernel with exodus mm since months and all works fine. Now i've bought a charger with qc 2.0, it's possible to add tunables to get 2.2 or 2.4a?? Thanks in advice!
  15. BuLLeT_93

    Post [KERNEL][LOS-MM] 09-10-2017 AGNi 🔥 pureLOS-MM v11.0

    +1 Now camera on Kate work but no Fingerprint!
  16. BuLLeT_93

    Post [KERNEL][LOS-MM] 09-10-2017 AGNi 🔥 pureLOS-MM v11.0

    Updated from 3.2 to 3.4r2 (Kate). Using Exodus rom, back camera now don't work, front is ok. Still 3.2 all works fine.
  17. BuLLeT_93

    Post List Accessories (Case,...) for Kate Version (Redmi Note 3 Pro Special Edition)

    The crap was removable, stratches not. And the rear of this phones scratch just watching :P
  18. BuLLeT_93

    Post List Accessories (Case,...) for Kate Version (Redmi Note 3 Pro Special Edition)

    This is not bad, use it since 2 months and also looks like new. For 6€ and Prime shipping isn't bad, when it's become yellow i'll buy a new one :D
  19. BuLLeT_93

    Post List Accessories (Case,...) for Kate Version (Redmi Note 3 Pro Special Edition)

    Not fit perfectly when arrived, but after 2/3 days it has "adapted" to the phone!
  20. BuLLeT_93

    Post List Accessories (Case,...) for Kate Version (Redmi Note 3 Pro Special Edition)

    Same, received today, bad surprise :( Edit: Actually i use this cover and fit perfectly https://www.amazon.it/dp/B01LYGWDKK/ref=cm_sw_r_other_apa_ms3kyb1BM3HWD
  21. BuLLeT_93

    Post [KERNEL][LOS-MM] 09-10-2017 AGNi 🔥 pureLOS-MM v11.0

    Using this kernel on Exodus Rom MM (Kate) since 2.8 test version and all work fine, but using 3.1 cause me delay on notification. Revert back to 2.8 or 3.0 solve. This happens also on my LG G3 with Gabriel Kernel UbertTC, the version with Linaro TC don't have this issue.
  22. BuLLeT_93

    Post [KERNEL][LOS-MM] 09-10-2017 AGNi 🔥 pureLOS-MM v11.0

    All works fine here. I'm using Exodus on Kate :thumbup:
  23. BuLLeT_93

    Post [KERNEL][MIUI-MM/N] 28-06-2018 AGNi 🔥 pureMIUI-MM/N v13.0

    Simply flash the zip, kate and kenzo are the same device except B20 band ;)
  24. BuLLeT_93

    Post [KERNEL][04-02][Radon Kenzo V6.3][STABLE][CM-AOSP-MIUI]

    I've attached the screenshot. I'm on Kate. With 2.9 all works fine, with both fpc or goodix selection during the installation.
  25. BuLLeT_93

    Post [KERNEL][04-02][Radon Kenzo V6.3][STABLE][CM-AOSP-MIUI]

    Camera not work with 2.9.5 on MIUI MM 6.10.13
  26. BuLLeT_93

    Post [KERNEL][04-02][Radon Kenzo V6.3][STABLE][CM-AOSP-MIUI]

    Last test build on Last miui mm 6.10.13 (Goodix FP) : - Camera not work - Fp not work
  27. BuLLeT_93

    Post [ROM] LIMITLESS FULL UX5.0 V10.3 | 30a | Marshmallow | D855/D855P

    Favorites was merged in Contact tab, u can find favorites on top of the list ;)
  28. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    With partitions formatted in F2FS the roms installation don't go fine, install it with ext4 partition, backup, format in f2fs, enable rm-f and restore. Or u can modify the updater-script under META-INF folder in rom zip, change all "ext4" string to "f2fs" (lowercase) using Notepad++, and...
  29. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Corrected the screenshot for MISC section on MEGA profile folder!
  30. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    There's an error in the screenshot, State_Helper have to be disabled, i was testing it and i forgot to disable before take screenshot. Apologize. U're not the first person with reboot, it's very strange, here and for some users all work fine, and for other not. I'm investigating, sorry again...
  31. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Absolutely no offense man, we are here to solve the problem :D
  32. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    No single reboot here from first day i'm using it, attach last_kmsg after the reboot and i take a look. U use undervolt?
  33. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    The phone shutdown at 90c for safety reason (no way to skip this check, was hardcoded in bootloader) For the thermal pad, the installation is easy, just follow one tutorial on you tube to disassembly the phone. It can be removed in a seconds and without problems, just take care during all...
  34. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Vivo a Frosinone e stiamo tutti i giorni a 35/37c, ho il G3 da quando uscito e posso dirti con certezza che l unica soluzione per stare tranquillo é mettere un pad termico all interno del telefono sotto la cpu, guadagni 10/15c di media. Sorry to all 4 the language!
  35. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    I think u need to reflash ur rom over, without wipe :) Feel smoother? :D Hi man, u need to go to THERMAL section, activate Intelli-Thermal Optimized, activate both core control, set frequency and core throttle to 68/70 (or 66/68 ) respectively and enable Temperature Safety :)
  36. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    UKM V1.4 and Profile Uploaded! UKM v1.4 Uploaded Changelog: - Re-writed and updated code to THERMAL section - Splitted Internal & External Read-Ahead Size - Added Live Entropy Value under I/O section - Added READ\WRITE-WAKEUP THRESHOLD tunables for Entropy under I/O section - Updated...
  37. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Because cause some ui lag to save more battery, and now i prefer smoothness :)
  38. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Some users reported that works fine :)
  39. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Go to TOOLS section and Restart Synapse, i have this reply pinned in Cliptray :sly:
  40. BuLLeT_93

    Post [ROM] LIMITLESS FULL UX5.0 V10.3 | 30a | Marshmallow | D855/D855P

    L5 is Linaro Toolchain and is more smooth (very fast) , U5 is Uber Toolchain and is more battery friendly :) U have only to choose!
  41. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Profile was ready, i have to do some little adjustment in UKM and then will release. Monday for sure this time. 54c during second benchmark run :D
  42. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    U5 was a little better in battery, but linaro was very smoooth.
  43. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Ukm can't cause bootloop in anyway, no file system here, u have to install first the kernel and then the UKM!
  44. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    N&N Rom 7.1 with some things changed by me under the hood :)
  45. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    Single and girlfriend both have some advantages, like governor, one is better for one thing and another one for something else :D Anyway Linaro was suuuuuper smooth, like a baby butt :D Amazing bro, this kernel becoming a must :D
  46. BuLLeT_93

    Post [KERNEL][STOCK-MM 3.4.113][Gabriel][Stweak][D85X_VS985_LS990_F400]_[160617]

    I'm going to install V 1.6 to my girl and report you :D ?