Search results

Updated to 5.02 and have the same problem as 5.01, the "Mode" button doesn't keep the settings. I use it for front camera, it work just one time then if i press again it show me the radio than the media player etc... but i only configured only for show front camera. Once i reboot the system...

Time waste.... Hal9k doesn't listen us.... i already asked him to reply us but nothing... he doesn't explain his roadmap to fix this very annoying problem. For the rest the his ROM is good

You can ask him a refound. If we ask all together a refound i bet he will hurry up to make an upgrade to fix at least the most important bugs. He hasn't replied to any message from August 13th.............

Hi! Seems you are expert, do you know how to update Zlink? I have already the apk file (4.0.32) and my system is PX6 with Hal9K v5 so it's already rooted. Could you gently point me step by step how to install? Thanks in advance

@Hal9k_ Hi are you still alive? Are you working on the fixes that paid users are requesting? Let's start together to request a refound so for sure he will reply...

I don't refer about gps rate Hz but i have many others bugs. (Just for reference i have a Dasaita PX6)

I'd like at least Hal9k should say something about these bugs... just a post so we know he is working on fixes. (Otherwise some people can think he is less responsive and won't buy his mod ROM). By the way i like this ROM and i will support it.

What is the best settings for fast positioning GPS? 10Hz or 2Hz ? If the unit can handle? I'd like the navigation app can track the position with less lag possible.

No also other settings for example the Mode button doesn't keep it settings. For the factory settings maybe depend of which firmware (i have the Dasaita new MCU HA_3.80 and it works good.). I don't want a refound... i will wait for sure when Hal9k will release a new update, i just said that it...

This is a very big issue... even the Hal9k menu doesn't keep the settings... I appreciate Hal9k's work but his problem is that after the first bugs he doesn't hear us anymore, he doesn't respond to messages in the short term ... do not let pass months before a new update to solve these...

Hal9k will send you a OTA code. Don't worry he will reply you very soon, usually in 1 day (Moscow time)

Someone has Zlink 4.0.23 link to download? Thanks in advance

Where did you get this MCU? Directly from Dasaita official? i'm asking for a friend..

@Hal9k_ There is a bug in the Hal9k settings, some of them doesn't keep the setting when you modify it: for example the Mode button, you can change what you want but once you try it doesn't work as aspected. Could you check it? I have a Dasaita PX6 with v5.0.1 mod. P.S. in the next update could...

Hal9k, thanks for your great ROM! i installed the OTA update and i found a bug when you set the Mode button, it works only one time and then never more. For example i setup two app, the Agama car launcher and the F-cam (front camera), i can switch from home to the camera than the home again...

Yes you are right, i wrote him directly and in a couple of minutes i got the code. Thanks Hal9k!

How much time takes to get code for OTA updates from Hal9k? i did this afternoon and i still didn't get it...

What version of Zlink is included into Hal9K v5.0.1?? Thanks in advance who can give me an answer.

Could you share the Zlink 4.0.3 apk? Thanks

I think Hal9k has stopped the development of this Rom, the 4.2 version has a lot of bugs (wifi/bluetooth and carplay) and he doesn't listen all people that have this issues.... No update from many days... i think i will switch to Malaysk rom because he update very often his rom. We have...

So are you still using TASKER app?

How did you do? I have Hal9K too but it's still have the banner pop-up every time I switch on the car.... what settings do you have?

yes i agree with you, but it already passed more than 1 month after he released the 4.2 version with this bugs.... the radio unit it's almoust inusable. Hal9k should release a quick patch or let the people downgrade to the previous OTA. To do this now i need reinstall from zero.

We need an urgent update from version 4.2.... there are too many problems, about bluetooth and wifi connections, (we need also an update to Zlink to support ios 14 ) . I paid the ota update to support Hal9k hard work but it's seems that the bugfix are very late to arrive.... are Hal9k...

Could you tell me how to upgrade with the new version of Zlink you posted? Step by step if is possible. Thanks in advance

Could you write here the procedure of update spet by step, i tried several times with bad result, i did a fresh install of the Rom because i was not able to use zlink anymore (because the problem of signature) thanks in advance

i just controlled but i can't find other driver with xxx_RF210 just only WQ_RF210

ok thanks again i'll have to look more deeply!

Thanks but is not my case: my Dasaita PX6 has WQ_RF210 board installed......

Someone has problem with bluetooth? I have serious problem. Initially when i restart the head unit (Dasaita PX6) it work normally, than my iphone 11 (ios 14.0.1) automatically connect to Zlink Apple Car Play, after few second it disconnect from it and then the bluetooth won't connect...

the problem for me is that my iphone is not connect well to the bluetooth of the Dasaita, the issue is that i can't answer or make a call through the Dasaita (android)..... When i'm able to connect to BT and the Zlink start then the BT disconnects, when switch shut down Zlink app BT won't...

i have same issue... looking forward to somebody do a stable update that solve this problem

Hi to all! i have a strange behaviour with 4.2 upgrade. The bluetooth of my Dasaita PX6 is not working good as before, sometimes my iphone is paired immediately once i switch on the car others it don't.... Moreover the Zlink is not working every time and when it working the iphone is...

It's seems that nobody can precisely describe the step by step process of updating the Zlink...... We need a tutorial. i'll pay for it. Thanks

Could you let me know the procedure to update the Zlink app to 3.6.12 (or newer)? I have a Hal9K rom. Thanks in advance

Could you explain how to upgrade the Zlink to these version? I tried on my Dasaita with Hal9K rom but it didn't work (get some errors) and i did a fresh install of the ROM to get the system work again...

Could you update the ZLink version on the next OTA update? The version 3.6.12 is the lastest. Thanks in advance

Could you explain better what i have to do? Please make a small guide how to do. thanks!

Could someone send me the Zlink's folder inside: \oem\bundled_persist-app\ ? I tried to update the APK because in the last OTA 4.1.0 Zlink wireless didn't work and now i get errors and a banner ask me to activate.... I have AppleCarPlay integrated on Dasaita PX6. Thanks in advance...

I have a Dasaita PX6 Max6 with integrated Zlink CarPlay. I decided to upgrade the Zlink apk file from 3.5.24 to 3.6.12……. but now when i try to use Zlink appear this error: https://imgur.com/QWnNAPD If i try to tap someware on the screen it appear this: https://imgur.com/bEFQ5D7 How can i do...

ZTE MF79 stick usb Wingle work good with last OTA 4.1.0

Dasaita PX6 with Hal9k 4.1.0 problem with integrated ZLink It seems that once installed the last OTA to version 4.1.0 the Zlink app needs 10-15 minutes to start in wifi mode... someone else has these problems? I tried to restart the unit but still no improvements

Hi to all! Could someone post a complete guide how to install a new version of Zlink? i have the Hal9k ROM so it's rooted. Thanks

Today i tried again but it doesn't work. So i deleted the OTA zip with "Root explore", rebooted the head unit and then it worked!! Downloaded without problem and smoothly installeded. Well done Hal9K!!

[SOLVED] Hi! Today i tried to update the system with OTA update 4.10 from 4.02. Unfortunately the process stopped at 99% and so i tried to reboot my Dasaita PX6, restart again the process started again from 99% but it wont continue, just stopped at 99%. There is a way to deleted the partial...

Hi to all! I have a Dasaita PX6 with Android 9 and the ROM Hal9K 4.02 , i use OBDLink SX (USB version!) with an app called Hybrid Assistant for Toyota Hybrid Cars. Every time i turn on the car a banner come up asking to open Hybrid assistant because i have a usb wire connected, there is a...

Hi dafunky, did you find the solution to avoid the annoying usb popup? If yes could you explain me in easy word how to do? i'm not good in android system. Thanks in advance

Hi, i was in your situation, could you post the link of the file that dasaita sent to you? Thanks

Hi! Nice ! I have Hal9k and also HA with OBDLink SX (via USB) and i like to solve the problem that every time i start the car the HA appear over the Agama Launcher. Is there a possibility to tell the Android (with Hal9K) to not open HA? Thanks