Search results

I tried, but unfortunately I failed. I did it: "https://forum.xda-developers.com/t/android-10-upgrade-md725-to-rf210-bt-module-swap.4221421/page-2" post 39

Where can I download "Lanucher CHN WIN" was in ROM 9 in the first version?

My password is 126

If this MD725 BT has this, it will definitely not work. Must mount RF210 BT.

As in post # 39, and my album is post # 35 without BT yet

After replacing the MD725 module with RF210 BT (https://forum.xda-developers.com/t/android-10-upgrade-md725-to-rf210-bt-module-swap.4221421/page-2), you can go ahead and install this ROM. Not even after replacing it, but adding the RF210 BT.

BT is already installed and works great on "HCT4_px5_10.0_ota (20201216)"

Dokładnie tak samo, dziękuję.

Kupiłem już. Czy znajdę gdzie opis, jak zainstalować? Can I solder in the marked place on my BT board?

Czy ten BT da się zamontować w tym miejscu na tej płycie GS?

If there is no access to "Developer Options", it will not be possible to change the ROM on this tablet? Cyli, jeśli nie ma dostępu do "Opcji programisty", nie będzie można zmienić ROMU na tym tablecie? The question is no longer valid.

Moje radio jest typu GS

Hello Can I install this module on this board? cześć Czy mogę zainstalować ten moduł na tej płycie?

typ 2

I had on my "GS7_PX5_10.0_ota (20200615) '' and I uploaded the Malay mod, but unfortunately the md725 Bluetooth is not supported and does not work. Everything else is ok, works great Is there any usb bluetooth that would work with A10?

Can you turn off the screensaver in this rom after the update?

Why is the "CHS WIN launcher" disappearing after installing the update to 1.3.6?

I downloaded the 1.3.5 update today

I repaired my tile, I live in Środa Śląska Ja naprawiłem swoją płytkę, mieszkam w Środzie Śląskiej

I also have MD725 versions and so far there is no problem with bluetooth of any version, but on A10 BT it does not work

Hi. I did tests on two PX5 4gb and 2gb boards and everything went ok, but when I came back on PX5 4gb with A10 - A9 I was too impatient and I broke the equipment, but I managed to put it back on again. Good luck with your fun.

Hello After connecting the board to the computer, I only have the message "USB device not recognized" Rockchip driver, I installed, how to fix it? Already gone, it turned out that I had too long USB cable But now I have another problem, I can only see the SD card in the GPS socket, and in the...

Chciałem wrócić do A9 i nie mogę pokonać czarnego ekranu, ale czasami dochodzi do delikatnego kliknięcia.

Pomyłka

I also installed and it works great.

And enjoying "update_Malay_Mod_v_1.1.1_Pie_9_0_Full_Version_18082019" is also not mandatory :)

Super ROM, thanks

I have to sell PX5 (octacore), RK3399 2gb ram, I changed my 4gb ram. (PX5 (octacore), RK3399 2gb modified to android 9 Malaysk, I can upload others on request)

I also tried, but I failed, I only got to recover A6 and gave up. I lifted back to the A8 recovery version and went to the pool (or $ 10).

I upgraded A8 to A9, but I used the application from "Hal9k_": ModInstallerProPX5.apk malay Is it possible to get the full version of your software? (I used to donate equipment)

Hey. There is some kind of apk that allows voice dialing of interlocutors, without the need to manually search for contacts?

Hal9k_. Super ROM, missing only the ability to switch the "launcher" in the settings. Are you planning to do this feature?

Hej Is it possible to set the Dutch language on this radio?

The PX3 board was mounted on three screws, the PX5 disc in the original is attached only to two, I also had a DVD problem before doing this modification. Without this conversion, the PX5 disc may be in poor contact with the DVD motherboard

I have such messages after installing iGO. (iGO from the DVD vendor) How to fix it?

This is a 2 GB RAM disc purchased from A 6.0 and reprogrammed on Oreo. Bought WITSON GS

I did it.

I have modernized the fixing of the PX5 board to the motherboard a bit, it is originally attached with only two screws and can not be pressed against the main board. The PX3 board was fixed with three screws. ps Do not make a hole when the heatsink is screwed to the plate :)

You have to do everything in turn from 1 point.

That's how it looks after me after installation:

After upgrading the given software via @ Malaysk, I still have the basic OREO, I installed with the cleaning. No additives as given in post # 1

But you can not have a double screen :) https://forum.xda-developers.com/android-auto/mtcd-software-development/px5-oreo-rom-t3736950/page59 post # 586

Today I changed Android 6 again to Android 8, installed the apk "Car Launcher AG" And now it looks great

View photo from post # 3422

Your DVD has a recovery system for Android 8 and this ROM is not compatible with your DVD.

Settings / Factory settings (password 126) and there in the Car Logo tab you choose

You do everything in settings.

I do not have problems with v7.2.

I came back on my DVD to android 6, doing it according to this description https://forum.xda-developers.com/showpost.php?p=75623275&postcount=402 omitting only in making an SD card points 2 and 3, that is: Update android 6 It's dangerous, you can damage the device Extract the archive to the...

Today I lowered my DVD from android 8 to android 6 and there were no problems (rom "update_6_0_1_v_7.0_MAL_13_02_2018_MTCD_PX5"), i did it as described lucerna. Android 8 has yet to wait until it's rooted on it