Search results

If someone could please help me out, I am having two sims one is jio another is bsnl. When I put both sims, Bsnl sim only works when data is enabled from BSNL otherwise it doesn't have network even if I select GSM only or GSM/WCDMA/LTE or GSM/WCDMA. I tried combination of airtel + jio and it...

I think you are too affected of such hypocracy by mi. They should have released the firmware update to enable us use the features of VOLTE of other operators. Btw thanks. You have helped me alot.

I know you are more experienced to this but can't we raise any request or something that mi release the firmware update to enable the same?

But here in our state airtel also have VOLTE support. I was using it on my Redmi 3s prime.

Yes, I was using arm 64 gapps only but it had some issues with recovery or something that gave error 64. I used BitGapps arm 64 and successfully flashed it. Thanks again The issue now I am facing is VOLTE support not available. Kindly help me out

Thanks bro. That really helped. now flashed the rom successfully but another issue now is while flashing open gapps error 64 comes saying the device architecture is not arm 64 Kindly help me out.

Yes , I have flashed 3.4.0 twrp recovery after you asked, but sadly the issue of error 7 persists. Kindly help me out

Facing Error : 7 while flashing Aosp 28052020 build i.e, the rom is for kenzo/ kate, this device is. Kindly help me out. Thanks in advance

Please if someone could help what is the problem, I am not able to flash anything thro TWRP. Screenshot attached. Thanks in advance.

Please if someone could help what is the problem, I am not able to flash anything thro TWRP. Screenshot attached. Thanks in advance.

Thanks a lot bro. tried again with your previous reply. Successful this time. Thanks again. Any ways to use two whatsapp apps on havoc. I was using on miui via dual apps and previously using whatsapp and gbwhatsapp on AOSP extended. But now gbwhatsapp user is being banned by whatsapp. Any ways...

I have tried many times going to recovery and fastboot using up and down volume buttons respectively. But didn't get any results. It gets stuck at MI again. Just sharing I have done EDL mode procedure before as well (2-3 months back). but at that time I was able to go to fastboot. This time it...

Someone Kindlly help..While trying to installing Havoc 2.5, I tried to backup my old MIUI stock rom with the batik recovery. Backup failed as the error said not able to mount /cust. I tried mounting /cust in the recovery but no result. Then to my stupidity, I wiped the current rom excluding...

clean flash?

Someone please help me out.. suddenly while rebooting the phone didn't boot up.. stuck on boot logo.. tried restart, clear cache and data.. also tried restoring old bckup.. that also stuck on boot logo.. please help me.. thanks in advance

#newbie in magisk Please if someone could help me out. I downloaded midnight master zip and scripts zip from github. But whenever I try to flash it via recovery or magisk manager it says error zip is not magisk module. Kindly help me out. Thanks Amandeep Mittal

Thanks for your reply. But there is only options as: "Automatic, USA, Radio band 800" nothing like radio band 32.

:(:(:( Can't Anyone here just help me out. I have only a single sim working from lst two days. Please someone can help me out. Thanks

Was using aosp 4.6 from last few days without any problems. but yesterday while switching over data connection sim, it suddenly got "no sim detected" , I tried rebooting, then wiping cache etc. Now after much effort, I came to know new weird problem. Both sim slots work properly as per hardware...

Weird Problem: Was using aosp 4.6 from last few days without any problems. but yesterday while switching over data connection sim, it suddenly got "no sim detected" , I tried rebooting, then wiping cache etc. Now after much effort, I came to know new weird problem. Both sim slots work properly...

I WANT TO TRY OUT THE APP. So I need a promocode

I am having a problem while trying to install viper4 android. Have installed in previous builds also but tbis time it shows installation failed coz of busybox not installed or broken... Even tried reinstalling buzy box again and viper4android after tat. No results. Kindly help me out. Thanks Aman

+1

Thanks. But I m still not able to hv volte, nd I dnt hv any volte working rom or latest miui mm rom bckup coz wen i bought the phn nd rooted it, it was lollipop version tat tym. Plz hlp me out. Thanks

For volte patch by sudeep as adviced by OP, there are two file told volte.zip and volte_rom_builddate.zip. In our thread its only one zip file's link is given, tried searching for other file's link. Please guide me another and if these both files are adviced to be flashed on ver 2 of this rom...

First time Install Please anyone confirm my query: Does Cm14 15112016 firmware file by Abhishek provided in his cm14.1 rom thread locks the bootloader or not? Please someone confirm? If you know any firmware file for rr naugat that doesn't lock bootloader, tell me. Thanks

Thanks. I will follow steps suggested by you. About firmware: That was exactly my question Does Cm14 15112016 firmware file by Abhishek provided in his cm14.1 rom thread locks the bootloader or not? Please someone confirm? Thanks

First time trying to install RR NAUGAT, before I was using xosp final mm rom. I have question: Does cm14 15112016 firmware file locks the bootloader? Steps to install RR NAUGAT: flash firmware + RR + Gapps or flash RR+ Gapps + firmware? Thanks

First time trying to install cm14.1, previously was on cm13.1. Flashed new bootloader file but got error about mount system while flashing rom. Please guide. Thanks

#offtopic Frds I am using xosp from 4 months. Going good, Now I have a problem signal strength is very less as compared to my bro's phone with miui stock. Cud this be an issue of cm radios or cm firmware. If yes, plz guide me. Bootloader official unlocked. Thanks

Help.. I was previously using xosp rom final(15/7/16) with official twrp. After flashed miui 8 via using Alka recovery as given instructions. My bootloader got locked. I re unlocked the bootloader again and flashed back official twrp. Now When Flashed XOSP again, Settings --> Security gives FC...

Umang96 bro, I m using XOSP rom for which development has stopped bfr cm13 08 aug 16 update. So, I don't have newer version based rom and I wish to use your kernel. Many of others may also be having the same. I would suggest you to please continue old led version kernel for people like us also...

Hey GuneetAtwal, Hws u buddy..I know u from Karbonn A5 group..may be u don't remember me. Good to see you here also. BTW, I need your help if you can over whatsapp or phone.. I can understand giving no. over here may be an issue for you but if u can whatsapp or sms me over 9915983001. I will be...

---------- Post added at 04:32 PM ---------- Previous post was at 04:09 PM ---------- +91950116164

I am using Redmi note kenzo, with miui 7.5.3.0 unlocked. I want to unlock the bootloader and wanna flash cm13. I wanna know shud i use official or unofficial way to unlock bootloader. Kindly tell pros nd cons in doing both ways. Thanks.

I am using Redmi note kenzo, with miui 7.5.3.0 unlocked. I want to unlock the bootloader and wanna flash cm13. I wanna know shud i use official or unofficial way to unlock bootloader. Kindly tell pros nd cons in doing both ways. Thanks.

Thanks for telling. And how to do tat bro.

I m on cm 12.1, going to install cm 13 for the first time. Do I hav to format my sd card before installing this. Please confirm. Thanks

I haven't set any alarm. It used to work earlier.. Rebooted many times..no result.

One weired problem Boot animation doesn't work. Installed r31 few days back. It was working till now, used few theme packs to recheck. But not working anymore. Thanks

Cm 11 bug: First of all, I don't have logcat. I want to report a bug..the phone was in switch off mode and I tried to charge my phone. It didn't....I m on CM11 with latest build of kernel. People on CM11 please confirm. Thanks

As of now cm 11 build going great. Will report if got any bugs or problem. Thanks for the build :)

Thanks really much for the update for cm 11 :) I was starting to think for moving to cm 12.1 but now I won't.

Sorry for my sms type language. But thanks to u for replying. Is there any way that i can remove the apps before flashing from zip file itself. As far as I know the apps are some kind of encapsulated somehow and not clearly show unlike in the case of cm 11. I use to just open the zip in...

I am currently on cm11. I want to install cm 12.1 but i have few issues if somebody could resolve, will be very thankful. Apps like quick boot, flashify etc don't work. I have even installed supersu nd given root permission from developer section in settings. I don't want to have few stock cm...

Why only for cm 12.1 nd miui bro... If u get tym plz update for cm 11 also.. Thanks

I dnt know if smone getting the same problem.. I did fresh install of r30. From lst few days i get this error titled " sim card removed" with description as 'The mobile network will be unavailable until you restart with a valid sim card inserted' This error started to happen frm lst few days...

Kairi... I request you on behalf of all cm 11 users, plz take tym from ur busy schedule nd build an updated version fr us also. No eta but still acknowledge if u r gng to build or already stated. Thanks

Plz do update fr cm 11 as many of us r tere... Atleast tese few updates with kk sources.. We r enjoying cm 11... Thanks

No update for cm 11?