Search results

Thanks for taking the time on this. I'm using TWRP 2.6.3.0. Sent from my Nexus 7 using Tapatalk

Here's the first few lines from my buildprop : # begin build properties # autogenerated by buildinfo.sh ro.build.id=KOT49H ro.build.display.id=KOT49H test-keys ro.build.version.incremental=eng.stm.20140103.004313 ro.build.version.sdk=19 ro.build.version.codename=REL...

When I try to flash this I still keep getting the message that it is not intended for this device. I have a 2013 Nexus 7 (flo) running the latest version of RastaKat & stock kernel. Any suggestions? Sent from my Nexus 7 using Tapatalk

The factory glue is pretty thick. If you attach the lcd to the digitizer without glue between, there may be a slight gap at the rear of the lcd where it rests on the midframe. I'm not sure if it would cause a problem or not. Maybe you could put a spacer between the rear of the lcd and the...

Not sure about the Styrofoam cutter. How thick is the wire? It needs to be about 0.08-0.12 mm. It needs to be perfectly smooth so as to not scratch the lcd. Also you'll need to get it up to 80 degrees Celsius and keep it there to soften that glue. Then you'll need some OCA glue remover to clean...

Not the ones made by chungwha. The colors aren't as good. They seem a little dull and blacks aren't as black, more of a dark gray. Try to get an original Hydis. If you can reuse your old silver bezel, you can get just the digitizer & lcd. If not, you'll have to get the whole assembly: digitizer...

I'm having trouble flashing this. I keep getting the message that it is not intended for this device. I'm using TWRP 2.6.3.0 and RastaKat 4.4. Any ideas? Sent from my Nexus 7 using Tapatalk

Thank you for the illustration. I have the adhesive strips to attach the digitizer to the silver bezel in the areas you've highlighted. What I'm wondering is which type of adhesive would be best to use between the digitizer and lcd, LOCA UV glue or an OCA pad like the one mentioned a few posts...

Do you mean adhesive strips around the bezel only or between the digitizer and lcd? Sent from my Nexus 7 using Tapatalk 4

Has anyone tried an OCA pad or LOCA to glue the digitizer to the lcd yet? I'm gathering materials now. I have everything to separate the two but trying to decide which route to go to put it all back together. Sent from my Nexus 7 using Tapatalk

Verified that bluetooth share works on stock KitKat. Anyone else having trouble tethering via bluetooth? Sent from my Nexus 7 using Tapatalk 4

rascarlo, any thoughts on the Bluetooth share error I'm having (post #2430 above)? Sent from my Nexus 7 using Tapatalk 4

Anyone having Bluetooth trouble? I use Bluetooth auto connect & Bluetooth auto tether to tether to my Galaxy s3. Works fine with latest RasbeanJelly but with Rastakat I keep getting the error message "Bluetooth share has stopped". The Bluetooth connection keeps cycling and the error message...

Having a bit of trouble flashing Rastakat. The flash fails and I get: Set_metadata_recursive: some changes failed E: error executing updater binary in zip Error flashing zip I'm coming from the last RasbeanJelly + Trinity & I've tried both dirty flashing as well as wiping then flashing. Any...

Any progress? Sent from my Nexus 7 using Tapatalk 4

Any progress? Sent from my Nexus 7 using Tapatalk 4

NP. I can wait. It's worth it... Sent from my Nexus 7 using Tapatalk 4

Sweet. Thanks... Sent from my Nexus 7 using Tapatalk 4

Any chance on a Rasbean update for 4.3 on the 2012 N7? Really missing it...

Trinity is the same version as before. I'll try a fresh install & do just the room & kernel first. Then the others one at a time to figure out which one is the culprit. Thanks... Sent from my Nexus 7 using Tapatalk HD

Anyone else having multiple reboots on the 6-22 build? I came directly from 5-27 and didn't have any at all. Now I get them multiple times per day. Sometimes 2 or 3 in the span of 30 minutes. I'm running RasbeanJelly, Trinity, Uber's Rasbean theme & N7 louder mod. I only update to the next...

Update: For anyone interested, I found & fixed the problem. I took the back off & was looking around for anything obvious. I knew the problem had to be either the battery or the usb port (or the electronics for either one). The battery is pretty much self contained so not much I could do there...

Yesterday I used my N7 while running errands & it was parked in the long neck windshield mount I have for it. This is the first time I've done this. I work third shift and it's usually night or early morning (and cool) when I'm driving with the tablet. Yesterday it was hot and the sun was...

[Help] possible overheat/charge issue Yesterday I used my N7 while running errands & it was parked in the long neck windshield mount I have for it. This is the first time I"ve done this. I work third shift and it's usually night or early morning (and cool) when I'm driving with the tablet...

Found this: http://www.etradesupply.com/oem-asus-google-nexus-7-tablet-digitizer-touch-screen.html They carry the lcd, glass and whole unit. I'm seriously thinking about ordering... Sent from my Nexus 7 using Tapatalk 2

I too am looking for a replacement screen/glass. I dropped mine last night & it cracked in the upper right hand corner, shattered actually. Some pieces of the glass fell out but I can still use the tablet as normal. I'm a bit confused about whether or not the glass can be replaced separately...

Oops... Thanks Sent from my Nexus 7 using Tapatalk 2

I don't have that option on my screen. Any ideas? Sent from my Nexus 7 using Tapatalk 2

Been using Rasbean + Trinity since they were released. By far the best out there. The new 4.2 versions scream and with Uber's tweaks, my N7 looks great! Sent from my Nexus 7 using Tapatalk 2

Don't get me wrong, I love the bluetooth tethering as opposed to wifi. The speed is more than enough to satisfy my streaming & browsing habits at work. Plus it eats about half as much of my phone's battery as opposed to wifi. I was just posting my results to give some people an idea of the...

As I posted earlier, I'm using the 2 auto bluetooth apps on my N7 & Verizon SG3. Here is a screenshot of a speed test I just performed comparing bluetooth vs. wifi tethering. Both tests were performed in the exact same spot back to back. Looks like wifi is a bit faster. The difference is not...

Here is my best time so far. I'm running trinity kernel and Rasbean jelly. I stream slacker all night at work via bluetooth tethered to my Verizon galaxy S3. Brightness is on lowest setting. I'm clocked at 1150mhz max but slacker tends to hover around 370mhz. Sent from my Nexus 7 using...

Been running do_7 and Rasbean 10/16 for a few days now. No SODs, battery is terrific, all of my apps work flawlessly, and this thing is faster than it's ever been (@ 1150mhz) Thanks guys... Sent from my Nexus 7 using Tapatalk 2

Got this to work with esfile explorer between my N7 & SG3. One question though. When I browse the files on my SG3, I can't see the files on my external sd card, only the ones on the internal memory. Anyone have any ideas on how to access the external card? Sent from my Nexus 7 using Tapatalk 2

Just wanted to chime in & say that the two bluetooth auto apps work great on my N7 & SG3. Chrome works, play store works & downloads, slacker works... Pandora doesn't work but that's an issue with pandora. Speed is comparable to wifi tethering. I can't tell a difference streaming slacker...

Just throwing in my $.02 to stir things up... I've been on a180-gpu466 for almost 10 days now with no SODs. I tried 183 but had multiple SODs almost immediately. The only glitch I'm having is that words with friends is a bit laggy and freezes up on me sometimes. Sent from my Nexus 7 using...

Switched to trinity 134 and now YouTube works fine. On another note, it seems I have lost some choices in TKT. The only governors available to me are ondemand, conservative, and performance. The only schedulers available are deadline and noop. I've tried clearing data, uninstalling and...

Is anyone else having trouble with the YouTube app? It freezes the tablet & I have to do a reset. The stock browser plays video on the YouTube website fine though. I'm running trinity 121 and Rasbean from 9/26. Also, I finally found a car charger that works and I'd like to use Current Widget...

I can confirm that this charger works and charges just as fast as the Asus wall charger. I have used it while watching a movie streamed from my home network while tethered to my galaxy S3 and it charged very quickly. http://www.caseen.com/Google-Nexus-7-Tablet-Car-Charger-5V-2A-_p_302.html...

Rasbean jelly + Trinity kernel Running @ 1100mhz and this thing is blazing fast! Plays any game I can throw at it without any problems whatsoever. Plus the battery life is amazing. I get 6-8 hours screen time consistently...

I just use a bluetooth headset or my bluetooth stereo for calls. I like to ride with the windows down so the tiny phone speaker is no good for me. Sent from my SCH-I535 using Tapatalk 2

+1 for being able to connect the S3 to the nexus 7 but not being able to transfer anything. Tried to send a picture in the gallery but it eventually failed.

+ 1 for the infuse dock. Fantastic! Sent from my SCH-I535 using Tapatalk 2

I'll see if I can somehow Frankenstein my touchstone and my infuse dock.... Sent from my SCH-I535 using Tapatalk 2

Why did you have to throw a wrench in my plans?! I just got my touchstone kit yesterday... Guess I'll wait & see what other, more knowledgeable/braver people have to say. It looks like the extra two pins have something to do with the sim card but that's just a guess. Since they're right next...

I think they're trying to push their Svoice, "hands free" concept. I ride with the windows down so it really doesn't work for me. Plus, I just don't think it's quite there yet... Sent from my SCH-I535 using Tapatalk 2

I use car home ultra. Starts right up when I put it in the infuse dock. Sent from my SCH-I535 using Tapatalk 2

I just wanted to throw my two cents in... I am completely amazed at the battery life of this phone! I got my Verizon gs3 on Friday and last night was the first night I used it at work. I stream slacker for at least 10 hours per night. My monthly data usage runs around 15gb/month (thank god for...

K. Got mine... love it and it's worth the wait. I'm outta here...

I'm in the same boat as you. I ordered a 16gb blue on 6/6 @ 6:28am. my mother ordered a 16gb white 1 hour after me and got her tracking number tuesday evening. hers is on the truck for delivery today. we live in the same town. I don't understand it at all.