Search results

No, both TWRP recovery images not boot on TA-1047 :( Even latest factory boot.img and recovery.img are not available, so no way back when you try to flash it.

Something is wrong with this rom. No OTA . Freezing and lagging. Bad idea to use it, better ask ulefone over e-mail for ROM.

Is possible to flash un-supersu package. Is somewhere in SuperSu topic. Or you can flash clean ROM / your backups (boot.img, recoovery.img, system.img). Because this i have used supersu in BINDSBIN mode and suhide. So i have hiden su, locked bootloader, working OTA and all root sensitive apps.

I used encryption in system Setup, i works, but with unknown password stored somewhere in nvdata partition. I am worry about loose root after OTA update :( and without pasword for twrp no way to get again to data partition.

Hi. Thank you for twrp. I am trying to use SuperSu with SuHide, i wipe data with this twrp to be able to install supersu in BINDSBIN mode to /data but data partition stay unencrypted to be mountable with thw twrp. How to encrypt it back with own known password keeping supersu and suhide...

If you did Format All + Download without full firmware in folder with scatter, you bricked you phone. Realy is not possible to repair this soft bric by opening phonne and doing somethink inside. Only you can try is download full ROM from needrom a flash it by spflash tools. If bootloader not...

Not so easy to do it. It will take very long time to port or build twrp :(

I have done it and lost two days by recovering it back. Full wipe in TWRP is realy not good idea, Better do full wipe in factory recovery and then flash twrp and only wipe data and cache. So even if it is not often situation, better do all backups and manual backup nvram and nvdata partitions...

If you do full wipe, you will loose IMEIs, MAC adresses etc.

That is what i am looking for too :)

Jop, usualy digitizer is dead. In some cases only flex cable broken or in wrong position in board connector. No software solution, you need disassembly device and repair.

I have enabled 5Ghz and ac support in original latest ROM v18, firmware is compatible, nvram include params to enable, but antena is only 2.4 so very poor signal. Have someone disassemly video or step by step instructions ? I would lite to try replace antena for dualband optimized one.

Already is in second post in this topic. Skip wipe step in it.

I have not used MD5 checksum, simple do not check it in twrp and instalation will go. You can check file integrity simply in PC, extraxt the zip using any archiver. If no error, file is ok. Back on topic, why in madOS missing android engineer mode and MTK engineer mode? All relevant setting...

Hmm, i have tryied BirdA SN Writer version 3.7, but phone try to boot, writer register it when i connec it powered off, shows Start searching kernel com port and handshake and nothing. Phone reboot itself twice and boot up normaly without switching to metamode :( Can be problem with root in...

Grrr, IMEIs lost. Which tool use to set/recover IMEIs? PLS. Phone is not possible to get to metamode. I did it step by step. Not supposed to loose IMEIs and MAC adresses. Do it without wipeing in TWRP, better is do factory reset in factory recovery, after it flash TWRP, DO FULL BACKUP, and...

Something new about rooting thi phone, just came tooday and is neccessary to root it to clean up all spyware and addaware garbage. EDIT: Best root is to flash TWRP and over TWRP flash SuperSU. After it is posible to flash original recovery.

OK, found way how to root this phone. Method is "simple": First OTA update to version iNew_U3_5.1_V1.1.0, not sure if root survive OTA. Do factory reset. Use SP Flash Tool to backup system.img, mount is under linux to /system folder as ext4, it is pure ext4. Unpack latest UPDATE-Supersu...

Hi, nice to hear. try this, it is for iNew U3, 6735M. http://mio.mio-it.cz/recovery_iNew_U3.7z thx

I have tested all available root apps, no success. I have Readbacked boot, recovery and system images, boot and recovery have special format, not possible to unpack and repack by available tools, mainly repack is problem. System is native EXT4 mountable under linux, injected by supersu files and...

Hi, not able to unpack system img from mediatek MT6752/32 platform. My fault or something new?

Hello, pls try to port theese files, it is original boot and recovery for lordor ld700, tryied 5 port methods, but recovery never booted. Thank you. http://uloz.to/xCh14kpk/ld700-rar

Hi, i am looking for ROM backup, mainly for baseband file, but even for all other parts, can someone do backup by SP Flash tools? Scatter file is equivalent with 6752 attached in post, so is possible to use it for backup part by part. Or simply copy file from rooted phone, is in...

Hi everyone, please which porting method are you using? I have tested MTK droid tools and its automake, but dont work. Which method / tool is best?

Hi, is possible to patch baseband to unlock FDD LTE on 900 MHz(1900), officialy is supported 800,1800,2100 and 2600, hardware should work. Baseband file is standard modem.img version MOLY.LR9.W1423.MD.LWTG.MP.V3.P3 A saw same for qualcomm here on forum.

Hello, i bought same phone and seems signal is ok. But i am probably not so far from BTS. It seems your phones has worse antena then phone before, you can not solve this by software (ril mod, baseband etc.). You have to try to solve it by hardware mod, probably extend antena to get higher gain...

I have just made CWM Recovery 6.0.2.8 ENG. Everything works, include USB Mass Storage in CWMR. Both formats included in file, for SP Flash Tools even flashable zip for twmr/cwmr. Multiple download link. http://www.multiupload.nl/I8KE3UKVWR How to run CWMR by buttons? Easy. Remove/Add...

Does it have TTS settings available in Settings ?? Does it have Face Unlock available in Settings and working? Or does exits daily use ROM with TTS settings in Settings ?? Or is posible co tonfigure it somewhere in /etc or else on rooted phone? By default Pico TTS and Google voice is in all...

This is problem is with all custom roms, every deleveloper force everything to latest version, and no one finish a fix all bugs in one version, so all custom roms are test only, no daily use. Or daily use with known bugs, but it is not optimal. I have tried donate developers and ask them to fix...

IMEIs are in logs in CWM backups. Provider will block your SIM by its IMSI, block android phone (Mainly MTK based) by IMEI which can by simply changed is nonsense, but if someone use it, it is a small chance to trace it. So try it and wish you good luck.

Or simply change IMEI for SIM slot 2 over Mobileuncel Tools to be absolutely sure .-) I use this way. Or if you are worry about eavesdropping, you can change both IMEIs twice per day.

Latest CWMR 6.0.2.8 for Newman N1 as flashable cwm zip file.

Have someone already ported CWM 6.0.2.8 or not? If not, here is my work. Flash over SP Flash Tool or directly form Mobileuncle Tools, or repack to cwm zip format. Special thanks to bgcngm ~ Bruno Martins

At 2.: Every android can be rooted. At 5.: Qualcomm MSM7227A at 1 GHz, Adreno 200 Can not see any reason why to go from Blade to Blade III This is still "first android phone" because of price.