Search results

in order to take updates you would need to restore the stock boot image with fastboot or magisk, and then update your device, then take the new boot image from the downloaded update and patch with magisk and then flash it to regain magisk root, you do not need to uninstall magisk or the modules...

Disregard wrong device.

Did you even read the post? I literally spent over 6 hours flashing reflashing locking unlocking researching ways to try and wipe every single partition on the device. And I still was unable to get it working. Literally the one thing I did NOT try was relocking not setting up and clearing all...

All you need to do is restore the original firmware completely and unroot then use the OEM lock command from fastboot. Make sure everything is stock before doing this as it will brick your device otherwise. Use the Lenovo device software to reflash to stock, the Motorola zoom is supported by...

I would like for someone who's fingerprint is not working to relock the bootloader and then disable fingerprint completely after phone setup and then try unlocking bootloader again and seeing if that fixes it. Maybe it's because they unlocked the bootloader before setting up a fingerprint and...

This may be where my issue is. I had setup the phone and registered my fingerprints prior to the unlock. Im guessing that they are being stored somewhere that I cannot wipe such as /system or inside an enclave chip etc. Because the only partition I couldn't manually use an erase command for was...

I'm having the exact same issue after unlocking bootloader. I didn't modify anything at all and still my phone's lock function is completely disabled. Only way I could fix it was going back to stock and re locking bootloader. I'm currently without root or any modifications because of this. I'm...

You need to create a Motorola account but the pages are located here https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-b

I did not have a chance to try magisk as I was only testing unlocking to see if anything broke. And whenever I couldn't set it up with fingerprint I relocked and wanted to wait to see if others have the same issue. I'm on this fw...

Sounds is more on the tinny side. Too much treble and it sounds distorted at high volumes like something is vibrating. The bass is basically non existent. Clarity is very good especially on phone calls and just for voice chatting but for music or media it's sub par. Honestly I'll be keeping my...

Might actually brick the device https://forum.xda-developers.com/oneplus-5t/help/relock-bootloader-flash-magisk-t3840071/

I haven't had a chance to try that. This phone is now my daily driver and I'm working for the next few days so I won't be able to get around to trying until then. I'm sure it wouldn't work though because I believe the device wouldn't boot after the bootloader was modified since locking the...

Stock firmware for most variants can be found here: https://mirrors.lolinet.com/firmware/moto/parker/official/ These seem to work as my device still works after flashing the appropiate firmware for my device multiple times.

Just as another side note, the system partition cannot be erased with fastboot either, access denied error even with unlocked bootloader. I figured this out while trying to get my fingerprint reader working. I tried multiple commands and also mfastboot instead of android sdk fastboot

Fingerprint on this device is disabled after i unlocked bootloader, I tried complete wiping the device multiple times as i thought this was my own fault since i had setup the device prior to unlocking bootloader. No dice. I thought maybe that a wipe would clear the fingerprint cache or...

I couldn't even get the phone not to boot loop with Oreo. The latest security updates break Xposed for my device and Xposed aparrently needs an update to fix this.

Anyone tested the new twrp installer yet? https://dl.twrp.me/beckham/twrp-installer-3.3.1-1-beckham.zip Looks like mtp is working now as well

No. There still isn't a zip file working for flashing. Only images are provided on twrp site at this time and they can only be booted not flashed

There isn't even a way to currently INSTALL TWRP on the z3. The only way to use twrp is with fastboot boot. And you use this to temporarily boot to twrp and flash the magisk installer zip for root. Magisk is systemless and doesn't modify system so you should be able to use all apps that detect...

Magisk root is straight forward. You can either get a working boot.img for your device from a firmware package and patch/flash it yourself. Or boot NOT flash the twrp images from the twrp website and install the magisk zip that way. The twrp for this device hasn't been compiled for flashing. It...

Depends on the model you have specifically, certain ones cant be unlocked such as amazon version. But the steps are the same as all other android phone bootloader unlocks, Steps can be found on motorola website...

You don't need twrp for root. Boot the image and use magisk to root your device systemlessly. SuperSU is depreciated. And twrp hasn't been built for this device in a flashable format. You can only boot temporarily and install magisk.

If you can get the boot.img from the OTA you can manually patch using magisk

Trwp can't be installed on this device as far as I know. Available twrp is for booting purposes only.

---REDACTED--- nothing to see here >.>

I'm trying to capture the OTA for OPWS28.70-31-5 i've run logcat and found a partial url but if someone could help me find the first half of the http request it would be much appreciated, i'd prefer not to have to wipe/dirty flash back to an older firmware and run through the last 3 ota updates...

https://mirrors.lolinet.com/firmware/moto/beckham/official/

Magisk is superior in about every way. Also super su isn't being developed anymore

Pretty sure it's an Xposed bug because Xposed bootloops on any device that's got 8.1 with latest patches

Just flash the magisk module uninstaller terminal app and run the terminal commands to remove the Xposed module. Downloads can be found in he magisk modules thread ---------- Post added at 12:13 PM ---------- Previous post was at 12:11 PM ---------- Just use the module linked here and flash in...

Xposed does not work on 8.1 latest security patches. Try contacting Xposed Dev because this is not magisk problem. Having same issue on 3 other devices with 8.1

And did you hide the magisk app using the option in settings as well as select pogo in magisk hide? I just checked and it's working fine for me. So your doing something wrong if it's detecting magisk. Probably didn't activate the random package name option for magisk Manager

I'm aware of how to boot TWRP on my device. I was wondering if it would be possible to *flash* it though. As I understand it you need the TWRP zip compiled and was wondering if you got that working or not for this device. Booting is fine for now but I need to have TWRP as recovery for bootloops...

Hopefully this means more support in the future. Did you flash or boot? Curious if it will bootloop if I flash the img

https://www.xda-developers.com/motorola-one-power-moto-z3-play-twrp/ https://twrp.me/motorola/motorolamotoz3play.html

That's not even the same processor as the z3 play. This phone uses a snap 636 not the 805

Honestly if the website is giving you the no then there's not much you can do because your firmware is what gives you the unlock code. Don't think you can change anything. There may be a workaround if you wipe the phone completely and try using the retus image or something to reflash. But I...

That should be the unlockable version. I have the same phone as my backup and it unlocked fine first try. Did you enable the oem unlock feature from the settings? Is it the website that gave you the unlocking error?

I'm having same issue on 8.1 with Moto z3 play. It's related to Xposed and the latest security patch most likely. I would assume Xposed needs to be fixed for this patch

I have retail version of the device xt 1929-4 and it works fine for me

Open the device settings and look at the model info and it should give you a clue in that screen. Amz in the model or the firmware version would tell you it's an amazon model. You can also look on the device for the model number. If I'm not mistaken it's printed on the bottom next to the...

I would assume it's because you have the Amazon version. That bootloader can't be unlocked

You need a firmware image for your specific device. Check the websites from this thread and see if you can find one specific to your device. Other images could brick your device. The steps should be the same for every device as far as fastboot flashing goes. But don't use an image for another...

---REDACTED---

Good to know for future, thanks for the heads up

thank you frantisheq working now

I can't seem to flash the patched boot image to my phone keep getting error: C:\ADB>fastboot flash boot patched_boot.img Sending 'boot__a' (23857 KB) OKAY [ 0.507s] Writing 'boot__a' (bootloader) Invalid partition name boot__a FAILED...

Download and install magisk and patch boot image normally make sure "force encrypt" and "dm verity" are selected or it will boot loop. TWRP still does not work yet. It's being worked on and discussed here: https://forum.xda-developers.com/z3-play/help/bounty-requesting-root-twrp-version-t3829179

Im boot looping as well on sdk 27 Oreo 8.1 and magisk 17.1 Moto x4 and latest patches/security updates Using latest Xposed Framework unified installer from magisk manager downloads section. Had to remove magisk module from twrp using uninstall mod to fix bootloop. Anyone have fix for this yet?

Know its a late/old response but if your still having this issue, I was having this same issue, the fastboot i was using was outdated, download the new minimal adb/fastboot package 1.4.3 from here and try again https://androidfilehost.com/?fid=962187416754459552 [COLOR="Silver"] ---------- Post...