Search results

I don't know, the problem with the Easy Flex Wireless is that the mount is so short, so hanging it off the windshield might make it hard to reach.

Thanks for the quick reply. Might have to reconsider this one if it BARELY fits. Probably just like how it fits into my iOttie XL mount right now.

Thanks for the quick reply. Will have to seriously consider this one.

So the phone with the case fits properly? I measured my phone with the same case and it's 3.5" wide. The iOttie Easy View 2 is rated for 3.5" wide devices. Do you have any issues with it not fitting? I have an iOttie Easy Touch XL and the phone with the Supcase Unicorn Bettle case barely...

I have the iOttie One Touch XL and I love it, but now that I have a Supcase Bettle case on it, it barely fits anymore. I measured my phone with the case on it and is now 3.5" wide. The one you reviewed lists as 3.3" wide. Do you have your phone in a case? If so, which one and do you have any...

I turned off my WiFi and set brightness to 1. The battery drain settled down after a few days and I didn't reset it or reinstall the android wear. I would suggest you try that first and go a couple more days.

I have noticed that over the last few days, my battery usage has levelled out and it has been hovering at like low 2%-3%. I have turned ambient ON and disabled the tilt, which I think has helped it a lot so the gyroscope isn't always on checking my wrist movements. One question about the...

I stand corrected. I think it does work the way you suggest, but not 100%. I connected my watch to my other phone's hotspot and am able to send/receive texts and emails to my watch. I turned off WiFi on my phone as well as the BT. It takes a while for it to connect and I assume authenticate...

When you set up the watch, you have to pair it via BT using the phone. That authenticates the watch hardware with your account on your phone. If the phone and watch are not on the same network, how would your watch authenticate against your account? It's not like there's any account login...

Here's what I have found: My setup: Nexus 6 with Moto 360 5.1.1 On WiFi (same network) - BT off, I can receive texts, reply to texts, send texts. Once I turn off the WiFi on my phone, I no longer get notifications because the phone no longer knows where the phone is to send the notifications...

I think I figured out the WiFi vs BT issue. When I had both on, the watch would default to receiving through BT first. When I walked out of range of my phone, the watch would vibrate twice and show the offline symbol. Even though I had WiFi on, it wouldn't always be connected automatically...

I updated mine on Sunday morning, so yeah, it's only been a few days. I'm hoping the battery drain settles down.

For you three. Are you using the stock face or a custom watch face? I will test it further today as I disabled Google Fit last night as it along with everything else was making my watch drain at 7-8% per hour yesterday. I took my watch off the charger at 7AM and by 5pm, it was already down...

I just noticed that if WiFi is off on my phone, my watch won't connect to the saved WiFi networks already configured on it. Once I turn on the WiFi on my phone, only then will my watch connect to WiFi. Anyone else have the same experience?

I forced the update last night (Saturday night) and then charged it up for Sunday starting at 8am. Used a stock face and kept WiFi off and it seems that battery life is a bit better as it has about 42% left (1am Monday morning). Tomorrow will be more of a test as I get more notifications on...

Why is everyone rushing to get it downloaded? It will come in time. The way I see it, the early ones who get it are guinea pigs to see how the real world update fares. If things go sideways with this update, I'll hold off on updating it. Right now, my watch is working well, so I don't have...

For those who got the update already... what's the status of it? Battery life? WiFi on? Please share.

I am very surprised today. It's been off the charger since 1:30am last night and I've used it normally today - ambient off, tilt on, stock face and it's at 56% right now. Took a screenshot of the battery usage. I'd be very happy if the battery drain continues like this.

It seems to be faring much better today. I charged it up last night (1:45am) and left off the charger and now (10:56am) it's at 82% discharging at 2.03% per hour. Received a few email notifications and a call notification this morning and that was it. Will see how it fares the rest of the day.

Nothing other than notifications from my phone. I purposely didn't look at it, or change anything today to preserve battery. I installed wearbatterystats and took a screenshot below. 4.17% per hour doesn't seem right. I took it off at 6pm today and it kept on going down until I put it on the...

I just installed it. Right now my battery is at 61%.

I took a screenshot of the battery life on my watch and noticed something compared to yours. My watch isn't going into idle like yours did at 43%. I literally don't touch it unless there's a notification and it comes on because I'm moving my arm.

If you read my original post about this, I have ambient off, tilt on. I'm only using it for notifications, that's it. I don't do anything else with it at all. Since my last reply, it's already dropped to 71% and I've only received a couple of email notifications. I realize that is ONLY a...

I've disabled Google Fit on the 360 and have turned off the high accuracy on the Fit app on my phone. When I did all of this, the watch was at 82% (9:30am) and now at 11:40am, it's already down to 74%. I will give it a full day to see if this helps better, but if not, then I will look for an...

I've had my 360 for a week now and have been struggling with battery life. It's running 5.0.2 paired to a Nexus 6 running 5.1.1 . Ambient mode off, tilt on, notifications on. I notice the battery drain the most in the mornings on my commute into work. I started to use Watchmaker pro to get...

You can buy them off the Motorola.com site.

X1000. I had the 5.0 OTA update and it made my N7 unbearable and unusable. I had to revert back to a stock 4.4.4 using the Wugs Toolkit. Just updated to 5.0.2 just to give it another try and it's like brand new again. Installing all my apps again and am able to enjoy my N7 again.

I bought the Tudia case for my wife's Moto G and it's very much like an otterbox. The inner lining is pretty tough and hard to press the buttons but I foresee that it will wear in over time. Looks really nice and protects the phone well. It didn't come with a screen protector though.

This is a screenshot from my wife's new Moto G. I was surprised when I saw this. She's had the phone for 2 days. Pretty awesome if you ask me.

I got the update on the 30th as well and I'm on Telus. Talk about leaving it until the last day of September. I had to manually check for the update. It didn't automatically pop up.

I have one in my car right now. It's awesome. It fits a Note 2 and still works with smaller phones like the One. The one handed removal and the auto closing feature is great to get the phone on the mount quickly.

Just an update.... I received it and I think it's the newer revision with the cutout for the power button. Been using the case for a week now and it feels great and allows you to see the back of the phone. My coworker saw it and asked if there was a case on it because it is still fairly clear...

Crap. I ordered a black/clear one on July 4th and was shipped my Amerifriend yesterday. I wonder if they sent the new revision or the old ones? I bought a case for my Nexus 7 off them and they sent me 3 revisions of them as they updated them. I wonder if they're doing that with these cases.

I've got an OEM Samsung white case on my Note 2 and it's it's fared very well. I've had it for months and it hasn't discoloured or gotten dirty. It all depends on the material that the case is made out of. I'm looking for a case for the One that I have now and I've used a Nillkin case before...

I can attest to the strength of the suction cup. It's the most insane one I've ever seen. Even when you don't pull down the locking tab, the suction cup holds so securely I had to literally peel it off the glass on the windshield. I've mounted it on the dash as well and if I pulled hard...

The pictures look great and show great detail, but personally, I can't justify $40 for a screen protector, no matter how good. I'm very careful with my phones and have never broken or significantly damaged one and I've switched through about 7 phones in the last 5 years so I'm knocking on wood...

I've used the Arkon ones before and before getting the Note2, I was using one, but that one blocks the camera, so if you wanted to use a dash cam program, it wouldn't work.

I know that the edge of the Note2 glass curves downward near the edges, but having a lip like that with the protective glass would be very annoying imo.

See the Iottie thread. http://forum.xda-developers.com/showthread.php?t=1982558 I picked one up and it's awesome for the Note2. The suction cup is the strongest one I've ever seen and I don't think it'll ever fall off.

Thanks so much for the case. It arrived today and it has a really nice silky feel to it. Good backup slim case.

I have this case and it's great. My coworker has the black one and it does scratch quite easily and is noticeable, but I have the white one, so it's not too bad. It's slim and protects the screen well. It's not as nice as the OEM S3 one but it works well and matches nicely.

For those using Telus and have been waiting patiently for JB on the One X. Good news! It's FINALLY out. http://www.telusmobility.com/en/ON/HTC-One-X/index.shtml I'm downloading the OTA update right now on my phone.

Confirmed unlock on a Telus S3 after updating to 4.1.1. It didn't work before the update.

I've been using my 3rd revision one for a few months now without much issue, but since I sold my 16gb and bought a new 32gb model, the magnet in the flap turns off the screen again when it's folded back completely. I find it strange since I never had issues with the 16gb model, but am now...

Yes and no. The 3G+HSPA+ is probably only for data, so if you use a VOIP service, then yes, but not like a traditional cell call.

Threads like this make me love Android all the more. Everyone's home screen is unique to them and their own personalities. It's awesome. There's no way you can have a thread like this on an ipad forum. Everyone's home screen would look exactly the same outside of the wallpapers.

So still no official Rogers ICS update yet? I'm looking to pickup a Raider for my wife, but the only ones I can find are Rogers and we're with Bell. I'd get an unlocked one to use, but I don't want to have to go wiping the phone again if there isn't already ICS on it for her to learn/use.

Read through this thread: http://forum.xda-developers.com/showthread.php?t=1668259 Quick summary: you have to be totally stock (relocked bootloader, unrooted, S-ON) to run the update to ICS via Bell.

You HAVE to relock the bootloader before the ICS RUU update will run.

I installed Vlingo and it works pretty well. I didn't like the Cyberon Voice Commander that much anyways, so as long as I can voice dial using another app, it's great.