Search results

I am using the micro G version of the rom without any issues.

Not possible to login from the app. Tried firefox & DuckDuckGo browsers but always fails to authorize. No problem to login from browser but it would be nice to be able to use the app. I really liked the old one.

HTC TyTN

If you search internet you might be surprised what you find. *lineage*microg*org*fajita.

Carbon is a good replacement. But I prefer Lineage if it is updated.

Thank you for the update. I have dirty flashed between Bliss- Carbon-Lineage without any problems so far. I normally use Lineage on my devices if possible so big thanks for keeping Lineage for clover alive!

I think you posted in the wrong thread. Nobody cares about operator specific subject in a generic lineage fajita thread.

Can anyone advice where to find settings to set home button and fwd aft arrows. Now I found the settings.

For me lineage 16 wifi has never worked without flashing smurf kernel. I do not why it is like that for me but smurf kernel always had fix that issue.

No & no.

I upgraded to this ROM 3 days ago and it performs quite well. Nowdays my Zuk2 Pro is mostly used as backup phone and during exercise/joggning. 2 things that I noticed: 1. GPS signal is week and gives faulty positions when using endomondo and other GPS based programs. 2. Some file managers can...

Read all on page1. I tried without wiping data and failed obviously at first. So just follow the instructions and all will be good.

I think it is interesting to hear that others have issues with some file managers for installing .apk files in android 10. I have similar experience with total commander in my mipad4 and previously zuk2 pro when testing lineage 17. Anyone knows why it is like that. Lucky Patcher was not the...

You probably has the correct security vendor patch. I did flash a xiaomi Fw update from attached link before upgrading to this rom. https://github.com/XiaomiFirmwareUpdater/firmware_xiaomi_clover Maybe that is the reason for the different dates in security vendor patch?

That is only "Vendor security patch level" On my MiPad 4 it shows 1 December 2018. But Android security patch is from 5 October 2019.

What TWRP shall be used for successfully flashing this rom?

I did a "dirty flash" and magnetic cover works as before.

Same problem happend to me. But after flashing again it worked.

http://en.miui.com/unlock/

Yes most of the apps but not all. Some modules in EdXposed will not work so you have to move them to the real internal memory.

Yes it is. I am using a 200gb card in my Mipad 4 as internal memory.

Why do you complain over a custom rom function that reminds you to update? The rom is completely free and the developer probably do this on his/hers free time without any compensation at all. If you are not happy I suggest you build your own improved rom or change to another rom.

https://m.youtube.com/watch?v=AyGj_70G_fc

Download the fw update package on unihertz forum and flash back to stock with the attached flash program. This I have done 3 times now because I fail to install TWRP and root. (I have the latest version n) In my mind the phone is not useful with the original fw and its more like a toy for kids...

This phone makes me very frustrated. My idea was to unlock install TWRP & root to be able to install pico gapps adblock etc to debloat all Chinese crap program. I have only been able to unlock bootloader. All the rest has failed. I had to reflash back to default when I bricked the phone. Is...

I have the same issue and it is not possible to fastboot. Need help and instructions. After some reading in other forums I found a solution that worked for me and flashed back to stock. http://bbs.tecno-mobile.com/forum/rom/97373-how-to-unbrick-soft-and-hard-bricked-mediatek-mtk-android-phone

Where to find TWRP for the new version? I have Unihertz_Jelly-Pro_N_20180308

unihertz jelly pro

No it went corrupted for me. I tried Opera and Firefox Focus. Now downloading in laptop

Not possible to download directly in the mobile... "Software downloads aren't possible on this device." Previous everything has worked so what has changed? It is a great rom so I will try through laptop as suggested but I can't se a logical reason why direct download should not work.

New update on zukfans forum 14.1- 20171001-UNOFFICIAL-z2_row https://zukfans.eu/community/index.php?threads/6708/

Thank you! I now have done all correctly and running Lineage 13 as you suggested without problem. I was thinking it should be much work but in fact it was not so painful at all but to find the Unlock_code.bin took some time... 1. Relock Bootloader with fastboot "fastboot oem lock" 2. Reflash to...

I have also upgraded from cm12 to lineage 13 with clean install. Why should it be necessary to flash ugly sense when it is clean Lineage rom? Can not the needed files be included in th pure Lineage 13 ROM? Sorry for complaining ,this is something I have been waiting for a long time.Thank you...

I can report that it works well with lineage-14.1-20170803-UNOFFICIAL so far. No boot loop or other issues.

I like this Rom very much. I dirty flashed it yesterday evening over AEX but had to wipe data also to avoid boot loop. So far I have not find any problems. When Xposed works on Zuk2 Pro with LOS 14/Nougat it will be perfect.

I did a clean install of this ROM and I like it much better now then earlier when I did a "dirty flash" Seems to be smoth and stable. I have no heating issues at all with latest OTA from 31 Jul. 2 small findings so far is: I want to disable led light for battery charging. Were can I do that...

Lineage 13 is stable & clean and supports Xposed . It has all I need for daily use.

Yes TWRP 3.1 was working ok. I did a quick try (dirty flash) and it looked nice but I will stay with Lineage 13 for some more time.

Same problem for me so what version is latest and working? Chinese TWRP 3.1 ?

There is several threads about Xposed in Xda forum did you even try to search?

I am using this ROM. Please keep us updated. спасибо за работу!

It is the same languages as normally in CM/Lineage rom's . It takes to long to write all in here :) But yes French language is supported.

This rom works well and feels stable for daily use. благодарю за работу!

This program was very useful for unlocking my bootloader. Zuk 2 Pro. I am happy that someone spend so much time and effort for such program and release it to the community.

"Nameless Rom == endless possibilities. Unless you have an iPhone, then you're out of luck." If you have a Zuk 2 Pro you and donated you are really out of luck....

I will keep disturbing this thread once per month until some action/ refound or something will come from responsible of this donation campaign...

So much waiting... I did take a look at the nameless rom web page an did find a interesting statement that would be nice if the ZUK 2 Pro was supported. "Nameless Rom developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly. This availability will...

So basically no news at all? Why can't the developer himself give out any information or answer any questions? That we get from you is not direct source but from a second source without in depth knowledge according to yourself. Not even a grateful message received after donation in Papal-No...

A status update would be very much appreciated. As indicated in this thread the testing/development started 18th of September.

Why not divide the forum with sub-forums for Z2 and Z2 Pro? Then it would be much clear and easy for all.