Search results

Hi. I have a minor issue. When i turn on my phone with the on/off button the widget is not shown directly and then it is flickering two times even i did set the delay to 0 ms.

After a short time with Hades i gave this rom a shot. To fix the non working home button when phone is asleep i used this guide. I also had problems to charge the phone beyond 70%. So i'm currently using RAD-Kernel with the interactive governor. Maybe i will try the conservative governor later...

First of all thanks to the developers for their hard work. I did give this a try after using Havoc on my S8. One thing i noticed is that the wifi reception is not as good as with the Havoc Rom. On places where i had reception with the Havoc Rom, i do not have it with the Hades Rom. Also the GSM...

I tried to dirty flash 3.11 over 3.08. Seems not to be a good idea because i got "google play services keep stopping". Maybe i will try to do a clean flash.

Just found this at their telegram channel:

Can we dirty flash this over Corvus 7.0?

It seems that there are a few issues with 7.5: Link

Maybe you should be a little more respectful, even if you do not like the threadstarters work. Imagine you made the ROM and someone is discrediting it in the way you did.

Could you elaborate this?

Hi, is there a possibility to show the battery percentage. I tried pixel launcher mods, but it only closes on selecting tweaks.

I ordered one from whitestone and the protector and the components i received are looking like the new version in the video for the s9. Unfortunately they sent me a used set with cracks on the protector, so i did have to sent it back (thank you amazon for no response or excuses).

As far as i know, is that just splitting the cable wont give you the opportunity to use USB-Host and charge the tablet at the same time.

Hi there. I have been reading about diy methods with soldering a resistor to the usb connector cable. With this "mod" you should be able to connect a device via OTG and charge the tablet at the same time. I want to use an external microphone for google assistant and need to charge the device...

Hi, i'm using Google Voice Search to control different devices via Autovoice and Tasker. But the microphone of the SM-T580 is not sensitive enough to get the "okay google" command if there is any background noise or if i stand to far away from the tablet. I found different threads about...

Hi, i just installed this Rom on my SM T580 and tried to activate "okay google" voice search to work from any screen, but under google settings -voice- "ok google" detection i can only select "from the Google app". I have been on stock before and had the possibility to choose "from any screen"...

Did you found a store where to buy this battery?

Is smart pull down for quick setting implemented?

No. I just couldn't start the netatmo weather app. After a successful installation the app isn't responding. But no problem for me, because i can use different widgets to show the relevant data.

Pitty that netatmo app does not work with this rom. I just bought a nexus 7 as a display for netatmo. Is there anything i can do against it?

Been using this for a while and it' quite stable. When i'm trying to access developer options the whole device freezes and sometimes i have to reboot.

Found the material glass thread meanwhile. But i'm facing another problem: wifi does not work. When i try to switch it on it just jumps back to off and does not find any access point. edit: maybe i had some problems after changing permissions. After a wipe everything is fine.

Good one. Is working as secondary in Multirom with root. Is there a way to make a transparent quick settings panel. I did use xposed before.

Hi, is there a possibility to backup the messages and restore them after installing another ROM. I could not find it via searching the thread. I already tried it with titanium but it restored the app only. regards edit: After selecting messages (SMS/MMS) in titanium for backup, i could restore...

Thanks, I think i got it now. It is just a bit irritating, because i tried to compose a new message and added different recipients into the "To:" line and it tried to send the messages as mms. I don't want to group in the meaning of that everyone can reply to all recipients - just a message to a...

Sorry to bring this up again. But if i use another messaging app, e.g. yaata it asked me if i would like to group the message or not and did send the messages as single messages not using mms. Is there a way to achieve this in Material Messaging?

I had the same problem with google apps. The FC window popped up again and again. For me wiping data partition did help. But make sure that have a backup first.

Hi, where did you order the red back cover?

You can install WSM Tools and use the Xperia/AOSP NavBar/Buttons Modul to assign and customize the Navigation Bar.

For me the download did work with following Link (as suggested add an "o" at the beginning): Link Btw: there is no more message popup reply since MIUI 6, so i'm back to MIUI5.

Link - i just got my second one, after my phone made acquaintance with my leatherman in my backpack;)

First thing i install on every new Rom is MiXplorer. You can add a new storage to bookmarks (smb, ftp etc.).

I using MIUI 6 with multirom and currently have MIUI 5 as basic ROM. But i did a quick test in MIUI 6: downloaded GPS Status, opened a window, put the phone on the window bench. After pressing "Reset GPS" and a following "Get Xtra data" i had a fix within 30 seconds. So generally GPS is working...

It seems that the popup-reply is gone under MIUI 6. There are only following setting available:

Thanx for porting this to our beloved N5. Is there a way to get a quick reply popup when a message arrives, or is this not included in new MIUI 6 standart messaging app?

I think there is no "best" protector. I'm using Orzly - Premium Tempered Glass and i'm quite happy with it. No problems after using it for two month.

Finally my XGear Skin arrived. Tried to adjust it as good as i a can, but sure not absolutely perfect. My only concern is about the edges. I can feel the edges of the skin at the corner and i'm not sure that the skin will stuck on the edges.

I did order 3 weeks ago and didn't get a tracking number. I'm aware that it takes some time to ship over to europe - but three weeks? I also send an email to xgear, but got no response. Is there a way to track the package down?

I'm using Orzly® - Premium Tempered Glass on my Nexus 5. There is only one cutout for the speaker.

Thx for both replies. I will use MiTools/Xposed and saw that some people had problems with it and want to have the a good basic ROM. And on the other side, the ROM from this thread seems not to be up to date (no offend), so i'm trying to find a "new" one.

Hi, i'm gonna get the Nexus 5 in a few days and did use offical MIUI on my Htc One S till now. So does anyone here use the offical ROM from here, or are there any reasons not to use this? regards

What do you mean with "leaked" firmware and recovery?

Maybe this can help.

Maybe wrong thread for this, but i tried different kernels for miui 5 and had this problem. I think also tested elementalx kernel. Maybe i will give it another try - but for now, i'm on your OnePlusOne.

Sorry, seems that my "6"-button is broken (MIUI 6). I'm coming from MIUI 5 for our One S, and only changed because of the bad call quality.

First thx for keeping this rom up to date. I had problems with battery draining the first days with this rom. After searching around to solve this problem, i stumbled over this thread. Using WLD and disabling the culprits in DisableService seems to solve the battery issues. btw. MIUI for our...

Proximity wake-up option has been enabled - will see if this will do the trick. Regarding volume wake up: I'm using two *.kl files: one for waking up the device via volume key and another one for using the headset-skip-buttons as volume control.

I do have to push power button sometimes twice to awake the phone. Is this a known bug coming from CM and/or is there a workaround for this?

So if we have the same problems like with CM11 - does anyone has a delay when unlocking the phone?

Against fist rumors it seems that the bezel/frame is not aluminum. Sony used some plastic for the sides. After using my beloved One S for two years now i think i will miss the feel of the surface. Hope the glass and the frame will not be prone to scratches. But i'm really tempted to get this...

There is a new update here on muiandroid.com and it's based on JB 4.2.