Search results

...EDIT: update just received !!

thanks !......but I do not find it....where ( in which Country) is available ? is it an automatic update ...as usual..or it requires specific actions ? Regards

Thanks again So, no way....its a pity...but I cannot sideload apks...so it is not working now ...as it will not work in future even after flashing...I give up Thanks for your time !!! Best Regards

Dear Idan73 thanks again just let me rewrite the entire process to change CSC , I watched again the video and now this is what I understood ( please have a look and tell me if you believe is ok ) : 1. Start NetOdin3 click options and NOT disable auto reboot 2. Click AP and select...

Thanks a lot for your test !! 2 points I would ask if possible: A)Now, considering how low level I feel to be in term of practice, could you help me ( and maybe others...) rewriting completely the procedure to change CSC region including the flash of the right regular firmware? B)which Region...

You need to unzip/decompress....this is what I did to get the combination file ! AS I WROTE, IF YOU OPEN THE LINK in mt original message, you can find the other files ; I did not download those files yet, not being sure to use them nor if effectively needed

hi, did you get any info ?

You are right !! Thanks !!...

I found combination file here : https://www.fullstockfirmwaredownload.com/downloads/sm-r820/ in the same site it seems we can find : AP_R820XXU1CTI4_usr.tar.md5 BL_R820XXU1CTI4_usr.tar.md5 CSC_OUA_R820OUA1CTI4_usr.tar.md5 maybe these are the files to use qt the end of the procedure ? thanks...

Hello I would ask if you did the change , I'm in the same situation as you and I looking for more detailed info just to contribute . here I am : I've just downloaded the file: COMBINATION-FT55_R820XXU1ATJ1.zip (589M) , it contains the file : COMBINATION-FT55_R820XXU1ATJ1.tar.md5 (1,712 Gb)...

myBPlab Hello could you pls help me to find MyBPLab last version and provide me info about how you installed ? Thanks Best Regards

dear All I believe I'll stop any attempt to have BP and ECG ; the " lockdown" on my phone , that does not let me install ANY xxx.apk , appears to me a definitive killer of any possible effort ; I would express my gratefull thanks to all the expert that supported me until today here I...

Dear All I would ask to the others users that have a GWA2 R820 - Tizen 5.5.0.1 -SW R820XXU1CTJ5 , region SM-R820NZKAXAR AP:R820XXU1CTJ5 CP: no phone CSC : R820OXA1CTJ5 is it normal that even having reset the watch , at the restart I see SHM on the watch...but when I click on it it shows...

Not..because , as wrote, the same phone being used with professionzl APPs, has some safety patch that not me enable Unknown origin app installation...

problems installing APKs Dear Adfree , All thanks a lot Adfree, I'm grateful to you for your support , but now I detected I have a major problem : using a phone ( S10 Samsung) that is even used for professional applications , it has a lock that block any apk installation if not...

Hello Could you share the self-signed ecg.tpk you used ? I would try to do the same Thanks

flash CTI4 firmware Hello I would try to flash the GWA2 R820 and try to come bqck to CTI4 firmware with netOdin , is this a possible action to try to come back ?? thanks Best Regqrds

root of GWA2 - R820 Dear Adfree, in relation to what you wrote : My suggestion... if Samung Pay not needed... Rooted CTI4 :angel: I mean we could increase this and also find unroot methods... as at the moment we only need some edit to CSC partition... Like this... example...

Thanks adfree !!! could you pls give me some suggestions ....what you recommend to do ? can I try to do anything ,,,even if still weak in front of such a....crazy samxxxxung strategy ? thanks again , I would not stay without trying !!

requested files Dear Adfree thanks for your never ending support , please check if these files can provide any help Best Regards

dear all after today last update of my R820, ECG and BP are gone.... actual CSC : R820OXA1CTJ5 SHM is still visible on the GWA2 apps list, but when I click on it shows a message asking to install SHM on my phone...and on my phone appears the message that SHM is not available in my...

Hello I simply did....again this morning....the steps described by Blenky ...if you look to my previous messages you'll find the link In few words: Using sdb I removed BP from my GWA2 R820 Installed the files ( linked by Blenky) in my galaxy S10 SHM pushed BP and ECG tpks in my GWA2 It...

I did thus update......and wirh surprise it reinstalled Tizen again....same 5.5.0 1....why ? Consequence= I lost BP .. again. !! I'll re-do what I did 2 days ago.....hoping it will work again.... Anybody experienced the same??

It works !! Thanks a lot Blenky I followed those instructions ( just a precisions for the others : I unistalled SHM 159 Caravana and reinstalled the new SHM 175 mod) and now I'm back to BP and ECG working with my GWA2 R820 running wwith Tizen 5.5.0.1 , the only comment is that...

Dear all first, thanks a lot to the magic Team ( Adfree, Caravana, others..) doing a lot for all us us !!! just to be simple in my question, as a lot of you, I was enjoing BP and ECG before the last upgrade to Tizen 5.5.0.1 ; after only ECG remains working, it's a pity now I have a samsung...

Thanks again for the great contribution to improve the performances of our GAW ( Gaw2 - R820 in my case) Stupid question : Which are the benefits to install SH 6.11.1.001 having in this moment SH 6.11.0.061 with tizen 4.0.0.8 and BP and ECG working perfectly ? Is there any relation to SPO2...

I can only sync ECG data between SHM and SH; and for some unknown reason, even ECG data are not automatically sync and ECG is sometimes even in the elements list...in such a cas I need to go SHM and in DATA, click on data permission for SH, and in the next page ( even if already al the...

Yes. ..galaxy S10

Just a detail : data from SHM ( in my case 159 caravana) are only partially transferred to SH = ECG data are correctly shared but BP data remain only in SHM.....I would ask if it is the same for others Thanks !!

Yes r820 If you change to US ( and I believe you can foweing the video instructions) and install SHM 159 caravana version ...BP and ECG will work both !!

Dear Blenky Dear Adfree Following your suggestions I finally changed the region to US with the instructions described in the video and using the files as indicated Immediatly at the end of the process I had a moment of panic having seen Tizen 4.0.0.6 ( !!...I had 4.0.0.7 before the...

thanks a lot BUT , after having seen the videos.....sorry but I do not find the links to download the files....really sorry to ask....,could you post the links ??

Dear Adfree, first :thanks a lot for all the support you're providing to all of us the file that generates such an alert is : COMBINATION-FT40_R820XXU1ASI2.tar.md5 and I obtained the same from this thread ...

GWA2 region change I was thinking , at the end , to do the step to change region , hoping to get Tizen 4.0.0.8 and , hopefully , complete the job....I tried to follow this link : https://forum.xda-developers.com/smartwatch/galaxy-watch/samsung-galaxy-watch-mactive-2-gwa2-t3968437/page4 the...

ECG visible only on the GWA2 but not working I believe I'm in the same situation , I share some details to try to get some comment: GWA2 R820 still on tizen 4.0.0.7 ( I know...I should change region and get 4.0.0.8. but could somebody tell me if the procedure will root the watch or...

Thanks a lot... nobody has suggestions for download links for r820?

thanks a lot but in this video I do not find ( ...sorry if I'm wrong..) links to download files for R820...only for . r825....any suggestion ..,?

hi Blenky I believe you have an r820 like, with tizen 4.0.0.7 could you pls tell ne where you downloaded all the files to change region to get 4.0.0.8 ?? thanks a lot !!!

Dear All again, thanks a lot to All the members doing a lot of efforts !! I'm using a GWA2 R820 , Tizen 4.0.0.7 and BP is working ( thanks to previous succesful set up done in early July following instructions from this thread...) Now I would try to jump to the next step and...

Dear All First : thanks to all the people ( adfree in particular but not only..) that are doing efforts and spending time to let all of us take the best from our GWA2 In the last days I've seen a huge increase of posts with , initially, enthusiastic messages..but progressively I noticed mainly...

Hello all First, thanks to all are doing efforts to let our GAW2 be able to handle BP and ECG....and not be slave of .....S. I'm not able to provide technical contribution...but in case we have any opportunity to devolop solutions... that need some financial support...we should consider to...

I had the same doubt few dsys ago....did you selected on your watch the continuos HR monitor ? pls check...maybe is not activated

Sent Back To Gearbest, shipped to Spain, after 15 days....got a remboursement of 135€. ....considering shipping costs lost for 40 euros(25+15). ...net recover is not so Good but better Than a bricked unuseful object. ...

Thanks for your suggestion.... Bluetooth of my phone seems to detect...and even pair...with the GTR...but not sure if it is a real pairing....I would try your suggestion...but what do you mean.....exactly? Could please provide me more detailed guidance? Thanks !!!

Geabest support asked me videos, photos , infos.....I really hope they'll propose some solution , it seems I'm not alone in such a situation

I've ask ed support to gearbest providing photos and videos. ....let's see. ....

Dear Friend....many thanks again GTR seems not connected to N+F....even if it shows steps done yesterday and today...I believe is not a real mesurement...no HR...no Keep analysis.... Furmare seems to be 1 3.4.5.....band identifier 36....resources 36.....font 9 ....no changes...still bricked or...

Thanks a lot I followed your suggestions Step 1-2-3....Ok Step 4 : install watch is failing ..it proposes to install the watch ... showing name and correct MAC address. ...But when I confirm clicking on the arrow on the right. ..a message appears on the bottom of the mobile screen "...

...installed version 3.4.1......no chance The gtr is seen....But non connectable. ....again...message to Reset