Search results

I flashed just AP and CSC and it worked, thanks. CSC formatted internal SD card, I didn't assume that. Unfortunately, I just confirmed that rear camera doesn't work in Samsung ROM so it's not LineageOS issue, but phone. One would think it's hardware failure, but I went to repair shop, camera...

Download not available, can someone upload again please.

Help needed. From recently I have Samsung S4 with LineageOS and TWRP. My back camera is not working, I don't know if it worked with stock ROM or it was broken when repairing SIM card. In order to determine that, I wanted to flash stock ROM I found, it's a 4 part firmware, not the same as...

Thanks. I have jfltecan and, while TWRP 2.8.7.0 worked, TWRP 3.3 from https://dl.twrp.me/jfltecan/ didn't load. This one 3.4.0 loads.

Same question here. My goal is just to have root. I'm not sure if this is possible at all. All instructions are classic way, unlock+TWRP+root. Maybe a solution would be pre-rooted ROM but I can't find any for F8131. Or to somehow use FlashTool to avoid TWRP, if possible. Please advise if...

I'm on Moto G5S with stock 7.1.1. GB is great. What I miss is to also have Battery Saver back on after charging. Now it can only be turned on manually or below threshold. But it turns off after each charging. Reason to keep battery saver on is also to avoid fingerprint vibration. An option to...

Working on Moto G5S Montana. List can be updated. But it auto-enables on phone start, even if previously disabled, which it should not. Option Auto-enable is off. Default setting in phone for connection is Charging.

Can you please comment on quick dial number?

I also cannot run "debloater" (nor "systemize" which I understand is another app I didn't install.) What's confusing is that Debaloater is not in Modules. I don't have other modules. When I try to install from Magisk Manager, I get error "Failed to mount image" for ext4 image. When I try to...

If I may suggest some additional functionalities: — shortcut for WiFi tethering (lot of clicking to turn on/off and no more present in notification bar shortcuts) — quick dial number (APM had one, great option to dial favourite number, it had only one, of course more would be even better)

Repeating my comment from https://forum.xda-developers.com/huawei-p9lite/help/emui-4-1-shortcuts-panel-how-to-add-t3427666. It's P7 but similar problem. I had Notification bar shortcuts customizable in A4.4 with B623 and EMUI 3.1, a plenty of them. After the upgrade to A5.1 with B852 but also...

I had Notification bar shortcuts customizable in A4.4 with B623 and EMUI 3.1, a plenty of them. After the upgrade to A5.1 with B852 but also EMUI 3.1 I'm disappointed to see only 9 shortcuts and no option to change it. I even don't know what edit mode would be. Someone asked for other Huawei...

Thanks. I've never used APM+ but I did APM with 4.4 (great app!) and it stopped working now on 5.1 with Xposed 3.1. Luckily, there's NeoPowerMenu, which in my case is working only with Advanced-Experimental PhoneWindowsManager hook.

Yes. But my Huawei P7 with EMUI 3.1 and Android: 5.1.1 is working with Advanced-Experimental PhoneWindowsManager hook. Before the hook, I turned on "deep xposed logging" when the menu was not displayed at all, just stock menu, but I didn't get anything there..

I'm hibernating keyboard just because it consumes power. That's so with SwiftKey and TouchPal which are great with swype/slide functions. Built-in keyboard in 4.4 doesn't but I don't use it. Huawei phone has this power consumption warning and those 2 are regularly on the list.

I'm using Greenify on 4.4. Some apps like Viber or keyboard are not hibernating automatically. We can force them to, with this zzz button in which case they hibernate all the time. I find it would be the most useful not to use zzz but to have another "Force hibernation shortcut" that would...

What exactly is cust.img? My Custom version now is CUSTC432D001. You're saying that this method with cust.img helps upgrading when a phone is rooted? And you're saying to do a local update with update.app, but that's not an update (which is zip), it's full ROM. Huawei says "Upgrade will erase...

Hi chenxiaolong , can you please add support for Huawei Ascend, in my case it's P7-L10? I'm attaching the tar file generated with the GetLogs zip flashed from twrp. And if you do, which setting would be fine, dual, multi-slots, data-slots? I read Instructions for dual booting but I'm still not...

When you open a new thread, instead of writing to the existing one, without giving your model ... and start the same "does it work now"? I guess not with L10. http://forum.xda-developers.com/ascend-p7/general/official-huawei-p7-miui-7-rom-fast-t3218591

I'm really satisfied with the phone, but not with the support. I never get OTA, so I have to flash manually. I don't know whether it's because of a rooted phone or removed set_immutable.list, but I'd expect to have a message: there's an update but your phone was changed, or something like...

Same weak signal problem with Canadian Note 3, N900W8, Android 5.

1 I have Canadian Note 3, N900W8 or hltecan, and there's "libmbp: Add hltecan to the whitelisted hlte codenames". I guess it means it works? 2 I see that even non-Samsung phones are supported. How about Huawei, in my case Ascend P7-L10 or hwp7? 3 What does it mean to "set the kernel"?

2.8.7.0 http://forum.xda-developers.com/ascend-p7/orig-development/recovery-twrp-2-8-7-0-touch-recovery-t3160130/post61924569#post61924569

I used APM both on EMUI 2.3 and 3.0 on Huawei P7. But, APM+ doesn't work (of course as a Xposed module), stock menu is not changed. App itself works. There are issues with Xposed on Huawei, so I use Disabled resource hooks now that I'm on Xposed 2.6. I hope this log helps. Otherwise, I may go...

Seems like a general problem, just manifested with Xposed. Check if the device is properly rooted and /system/set_immutable.list removed, if you have it.

F-Droid says "Version 1.19 - Added on 2015-03-29" while Play says "Version 2.2.4 - 2015-07-23". Why is F-Droid not current? Thank you.

I had the same problem on B126 and now that I'm on B621 it's reversed (a joke :)), I mean it's OK, it remembers the last connection. So, write your firmware and upgrade with OTA to a next version or full upgrade to B609. I did that and didn't loose data.

What does it mean, to update B805 with B609 /B621 Kernel support? I use B20 unlocked kernel now (from http://forum.xda-developers.com/ascend-p7/general/rooted-p7-l10-609-t3003605) on B621 firmware, it's OK. I asked there what exactly is "unlocked"? Does it also mean we can't used higher B805 on...

Correct: or: http://forum.xda-developers.com/ascend-p7/general/rooted-p7-l10-609-t3003605 Trick is: boot/kernel must be changed starting from B619, as I also experienced: http://forum.xda-developers.com/showpost.php?p=61981460&postcount=195

I don't know what toggles in which screen, but I noticed that Power menu, it's 1.5.0, from Wanam Kit is not large enough, it has 7 rows now., bit more are needed. I have Huawei P7 with EMUI 3., resolution 108x1920. For example 3 sound buttons on the bottom are not visible. Also, stock reboot...

Excuse me, how do you unlock kernel? What does it really mean? Can you also make B621? Why shoul the kernel version have to be the same as firmware build? I had B126 with Busybox and removed set_immutable.lis) and I never got updates, Huawei really complicates with that, there is no...

As for devices that have <5.0, OTA still won't work and we must go back to Huawei recovery to apply OTA?

You mean this? http://forum.xda-developers.com/ascend-p7/general/twrp-backup-b-133-rom-t2875112

http://forum.xda-developers.com/ascend-p7/general/update-p7-l10c900b805-android-5-1-emui-t3157206

Thank you. But goto function doesn't offer the last line. For a document with few thousand lines, it offers lines 147, 1, 2... I don't know how Turbo works, but seems to me that it didn't load the whole file.

I'm using text editor a lot for files few thousands lines long. I was happy for a long time with Jota, but they don't work now for me, for two problems : scrolling and Google services integration, because I'm not on play store. Today I took Turbo from F-Droid and it looks nice, but there's...

What's the point in making this available on Hungarian site only? If we go to http://consumer.huawei.com/en/mobile-phones/support/downloads/ascend-p7.htm or http://www.huaweimobileshop.com/download/ there's nothing there. And, where's the Change Log for those noew versions?

http://forum.xda-developers.com/showpost.php?p=55097407&postcount=691

Thank you. Why Ascend is not on http://teamw.in/twrp_view_all_devices?

I contacted Huawei through http://consumer.huawei.com/en/contact-us/index.htm?tag=email with this SMS issue but I've never received a reply. Shame.

Good, thank you. So, I repeat my questions. I have sth. else: can you make camera work immediately by pressing button on a locked screen? Or by swiping aside, like in newer CM.

Thank you, but I'd prefer Web page or email. If I type a single letter 'č' in the default P7 SMS app, I have only 69 characters left, instead of 159. My previous Samsung stock app or CM were able to convert this in message so that they display 'č' but count and send 'c', which really...

SMS I have a problem with the stock messaging app. I turned on '7- bit optimization' in order to use GSM alphabet in messages and not Unicode, but it doesn't seem to work, at least not with Eastern European characters šžčćđ. Does Huawei have some technical support available for users? It...

Does not work on Huawei Ascend P7 - no option shown. Setting and Keyguard attached.

I'm surprised I got some useless Swype for Huawei on my European mobile, with languages I've never heard of, instead of collection of regional and european languages. I mean, respect for all, surely, but this should be selected for a region where it's sold....either by Huawei either by an importer.

Also, "Unfortunately, settings has stopped". I'm on Xposed 2.5.1. because 2.6+ don't work on Huawei P7. Loading Xposed v47 (for Zygote)... Running Stock ROM 'P7-L10V100R001C00B126' with fingerprint 'Huawei/P7-L10/hwp7:4.4.2/HuaweiP7-L10/C00B126:user/ota-rel-keys,release-keys' Logs attached. I...

After reading here and http://forum.xda-developers.com/showpost.php?p=52801382&postcount=8, I still didn't understand why Xposed 2.5 works on P7 and 2.6 doesn't. rovo89, can you please explain and help us to use new Xposed in P7?

Well.. I have Xposed 2.6.1 and the same problem...almost nothing works. Except Xposed Torch :) So, thanx for the advice, Xposed 2.5 works, tested with Advanced Power Menu 9.2.2.. Xprivacy must be 2.0.27. which is a pity. http://forum.xda-developers.com/showpost.php?p=52801382&postcount=8...

I think it's similar. I had that problem with different apps, from time to time they become unresponsive. Side efect is that CPU goes high, phone heats and battery is soon empty. The only solution is reboot. First I thought it's about my sdcards, and I checked them - as suggested here - but...

Permissions in P6/7: http://forum.xda-developers.com/showpost.php?p=54481284&postcount=590 Xposed in P6/7: http://forum.xda-developers.com/showpost.php?p=54606614&postcount=659