Search results

https://www.celsoazevedo.com/files/android/google-camera/f/changelog666/ Gcam_6.2.030_Advanced_BF_V2.2.1.190822.1145.apk It works like a charm. Everything is fine, including the super wide lens. To switch to super wide lens, you should enable advanced mode in "about" setting, then enable aux...

Thx alot for your comment! I updated to build 0317 from 0227 today. Then I kept getting and losing mobile network signal. After doing wipe data/factory reset in recovery, the mobile network got working. But the data connection still can't be established. After saw your post, I checked my APN...

Yes. I can not select sound effect, but the effect is working. When I change the effect in awesome beats, the sound of Google Music changes immediately. Nexus 10 withe CM10.1.

still not work on Nexus 10 with "MoDaCo CyanogenMod 10.1 Custom ROM r4"

Thx a lot, Paul. Would u plz add wifi tethering function in next version ? So that we can turn nexus10 into an AP by using USB 3G dongle.

Maybe thers is a bug about GPS in this ROM The file mode of "/system/vendor/bin/gpsd" is 644. So it will met the following error when run google maps or GPS Status APP: "LIBGPS: Cannot communicate (write) with a GPSD“ After change file mode to 755, GPS works again.

Same here on Xoom EOS ICS 1.0.

No need to activate, just ignore it. Have you modified /system/etc/ppp/peers/pppd-ril.options ?

I am profoundly grateful to you, our hero. Using red font is to catching your attention. I reported the similar issue on this post: http://forum.xda-developers.com/showpost.php?p=13308325&postcount=1419. But it is flooded by so many posts. The leak issue exists in 1.4.0 is about tethering...

There is a memory leak issue in TIAMAT Kernel. The free memory will decrease slowly. After 1-2 days using, even if I killed all process, the free memory will be below 150M, I have to reboot xoom to free memory. But Launchpad Kernel is very safe, free memory is always larger than 450M after I...

It works on xoom 3G version 3.1. It should work on wifi version too, because it has nothing being related to 3G radio module. No need to push any file to xoom, just install the apk, then you can mount NTFS disk within this tool.

That's great, thx! It works on xoom without any problem.

Me too. The pppd configuration file was reset after upgrade to 3.1, so I redid step 2.13" modify android pppd configuration file", then the 3G icon returned back.

same here. but I think OTG function is broken. xoom doesn't recognize the USB thumb drive now. here is the log: I//system/bin/fsck_msdos( 85): ** /dev/block/vold/8:0 I//system/bin/fsck_msdos( 85): Invalid sector size: 64380 I/logwrapper( 85): /system/bin/fsck_msdos terminated by exit(8) E/Vold (...

USB OTG doesn't work now.

After doing this, then I simply did only step 4 @http://forum.xda-developers.com/showthread.php?t=1074609, and I got SD Card support back now.

no matter PP2P or L2TP. here is the log: I/SProxy_mtpd( 158): Stop VPN daemon: mtpd D/VpnSettings( 2968): received connectivity: ikta3(pptp)★★★★: connected? CONNECTING err=0 D/dalvikvm( 2968): GC_FOR_ALLOC freed 3978K, 52% free 8580K/17799K, paused 52ms I/dalvikvm-heap( 2968): Grow heap...

You can read AN(HDR username) from your USB 3G Card directly by some crack tool ,such as CDMAworkshop, QPST or PST. but the AAA(HDR passwor) can not be read. You should get AAA from friends working in China TeleCom. You can also buy your AAA information from taobao.com, it costs about 50-300 RMB.

For using on Unicom network, you should buy WCDMA version, not CDMA version. BTW, Motorola will sell WCDMA version in MAY or JUNE at china.

Yes, found it only when turned on tethering.

same issue at here. I'm using xoom.

I found a memory leak bug in kernel 1.4.0. And this issue doesn't exist in 1.3.2. The follow steps can reproduce it. Turn on Portable Wi-Fi hotspot or USB tethering, then check free memory in settings or by task-killer. it would decrease slowly. 1.turn on tethering, check free memory. In...

Turn on Portable Wi-Fi hotspot or USB tethering, then check free memory in settings or by task-killer. it would decrease slowly. 1.turn on tethering, check free memory. In settings(PS:this screenshot is taken after reboot, so the time is newest). By task killer(14:27 416M free) 2.the free...

plz see step 4, it is mentioned.

same as tiamat 1.4.0, there is a memory leaking bug in this kernel too. if you turn on WiFi Tether, the free memory would decrease slowly, until xoom lost response.

Did anyone experience memory leak issue after updated to 1.4.0? My xoom lost response after about 1 hour. I rebooted it, then checked free ram in the settings, the value was about 500M. I checked it every several minutes,and saw the free ram decreasing slowly. After about 1 hour, it dropped...

If you haven't written data to the disk, I think it would be safe to unplug the cable directly. for the issue of lost mounting, I have never met it, need some time to observe it.

sorry for the 'Permission Denied' of ntfs-3g. It missed a chmod command in the first post. we should runadb shell chmod 755 /system/xbin/ntfs-3g /system/xbin/umount_force to get the permission.

search "adb wireless"，you can get this awesome free app, it has a widget built-in. and born at a bit long ago.

that's great! so i'll try to get voice and 1x working too.

can you help me try this? (original post from http://www.rimweb.in/forums/topic/29600-motorola-droid-droid-x-data-with-relaince-cdma/page__st__15) even if the password is unicode, maybe writing item 1192 can resolve this problem.

you can not change PPP,PAP username of xoom, they are always the same as AN. as the log said, you are using a protocal not accepted by network. if you have QQ number, you can PM me that, and i'd love to assist you on the remote.

hi lesjaw, did you uncheck the "Req pw ENC" option when you wrote UM and AN password using QPST? if you didn't disable it, then you would get the error password written into xoom .

No, the usb port can not provide sufficient current to spin hard disk. so I used a powered USB hub to connect hard disk. (I have tested it just a moment ago, xoom couldn't identify the 2.5 inch hard disk without powered USB hub.) I tested it on CDMA version, but think it should work on wifi...

we can not read AAA from SIM card through Cell Phone.

yes,it still shows up verizon wirelesss on my xoom. Sent from my Xoom using XDA App

I haven't met this problem. Every time i turn off airplane mode, it always shows me the 3G icon after a few seconds. When i turn off airplane mode, it first display a signal bar of pool level, then change to 3G icon showing full level.

Comment @ 1st June 2011: In Android 3.1 stock kernel or Tiamat kernel, it has usb-hosting function enabled.So just install hellcat82’s apk and ignore this guide, you could get your NTFS disk mounted. All Thanks to Roebeet who has enabled usb hosting on xoom. see the detail at here. But it...

Congratulations! could you tell me if you have upated the pppd config file of android? Sent from my Xoom using XDA App

[updated] I have tried it, but couldn't send or receive sms. to send sms, we need correct ESN,IMSI and AKEY. to receive sms, we need correct ESN and IMSI. ISMI and AKEY can be changed on xoom, but ESN can not be. we should change ESN to the factory value of xoom at the provider side. then get...

the SPC is 000000 ( six zero).

I tested QPST 2.7.355 on windows 7 just a moment ago. to slow down the connection between xoom and pc, i created a virtual port via WiFi. it worked without any error, although the reading speed was a bit slow. NV-item 1192 is Write-only, can not be read out. for AAA=99000074221234, item 1192...

oh, i forgot it. I changed SID/NID successfully only in motorola programming app. (guide is updated) and QPST 2.7.323 can not connect to xoom, you should upgrade it.QPST 2.7.355 should work.

http://www.whiterabbit.org/android/ is great, but some of his items are not necessary for xoom. we should just need item 8040,8041,8042,8043, which is being used to generate AN by radio firmware. i haven't met "Phone Does Not Answer" message by using CDMAWorkshop to write these nv_items...

I have tried the hidden emergency caller, it told me voice is disabled. I found some SIP UI built-in, so maybe we can see a integrated VoIP caller on android tablet in the near future. To enable 1x service, we should change ESN on the provider side to the factory ESN of xoom, then get the...

if you just want to using EvDO, then you should ignore ESN modifing. in fact, i'm using factory ESN of xoom now. btw, there is no way being found to change ESN of xoom. you need to change ESN on the provider side to get 1x network working. for ur first question, i think rooting is not...

OK, I wrote a guide about EvDO hacking at http://forum.xda-developers.com/showthread.php?p=12542242#post12542242

（There may be something missed in the following steps. if u got problem, feel free to feedback） It works on Xoom CDMA 3.0/3.1 version. after upgrade to 3.1, the pppd configuration file was reset , so we should redo step 2.13 to get 3G connection 1.Preparing 1.1 AN & AAA AN & AAA can be...

Does XDA allow posting the detail about cdma hack?

After using some CDMA crack tools, I get it running on ChinaTelecom network now. The 3G data link works very well. I think it can be used on other CDMA network provider also, such as sprint.