Search results

  1. R

    Post display broken

    Thanks I ordered one from maxbhi, working nicely- using for a week
  2. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    Never used xposed. I usually always do a dirty flash upgrade - did same way for 5.6 to 5.7 a month back. Just playing around found a way to enable torch - Do a double tap on Power button, but hold the second tap. Torch comes on- works only with screen off in first place. Same way to turn off.
  3. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    Yes, dirty flashed from 5.7. Not working even after I renabled the setting.
  4. R

    Post [MOD] Jio VoLTE enabler for all roms

    Works with FrankensteinS6 SR v3 ROM thank you
  5. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    Anyone getting a hang on increasing call volume when on speakerphone? ------------ On investigation, found the issue to be when recording call Boldbeast recorder on speakerphone, taking the issue up with them
  6. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    check if screen rotation is also not working? if not - flash sensor zip from below link- https://zukfans.eu/community/threads/sensors-not-working-anymore.827/#post-8533
  7. R

    Post Best Oreo ROM for Z2 Plus right now?

    I am using JIO SIM for Volte with latest build AospExtended-v5.1-z2_plus-20180117-2307-OFFICIAL and Baseband 1.76, outgoing calls not working for me. Are you using the same ROM and baseband, your volte provider also JIO?
  8. R

    Post Best Oreo ROM for Z2 Plus right now?

    Are Volte outgoing calls are working for you?
  9. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    Incoming calls are fine, issue only with outgoing calls. Using JIO volte only, earlier 31st Dec release was fine. Flashed dirty. Baseband 1.76. Please find logcat attached.
  10. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    The issue comes up when you enable WiFi and it tries to connect, I was using the custom baseband fine with AEX 5.1 for about 2 days using data from VOLTE SIM. Then I used the fastboot method to install 1.76 baseband, and then phone started up but I had lost VOLTE- Had to flash the deodexed 2.5...
  11. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    After baseband got updated to M8996FAAAANAZM-1.76387.1.92759.1 - phone booted by I lost JIO volte I had to also flash Deodexed-Z2-Plus-Nougat-2.5.104-ST (India) from below link to get my volte back...
  12. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    I had the same exact issue, fixed it by installing Baseband version: M8996FAAAANAZM-1.76387.1.92759.1 from below link https://zukfans.eu/community/threads/zuk-z2-baseband-collection-versions.4565/ filename: radio_ZUI2.5.099ST.rar
  13. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    Latest build-1226-(clean install) working fine for me - using Boldbeast recorder
  14. R

    Post [ROM][8.1.0][STABLE][OFFICIAL][TREBLE] AospExtended ROM V5.8 [Z2 PLUS]

    Try to flash this one from TWRP https://forum.xda-developers.com/showpost.php?p=74954023&postcount=15 Seems to be stable than rest https://zukfans.eu/community/threads/zuk-z2-baseband-collection-versions.4565/page-3#post-67750
  15. R

    Post [ROM] [EOL] [7.1.2] [EAS] [UNOFFICIAL] AEX 4.6 [17th October]

    Call issue I am facing a peculiar issue where suddenly I will stop getting calls, I wont know about it. Some time later I will try to make a call to someone - I will bring up the Phone app and select a contact- the calling UI will come up and then call will disconnect immediately. I am...
  16. R

    Post [ROM] [7.1.2] [OFFICIAL][VoLTE] AEX 4.6

    On AEX 4.4, makes the Z2 worthy of its specs. Kudos to davidevinavil and others. Only issue is the noise on call due to secondary noise cancellation mic is not working, I was able to confirm this using Boldbeast recorder app.
  17. R

    Post The OnePlus X Ask for an Invite / Share an Invite Roll Up Thread

    Hello India guys, Got 3 invites to share, got them as emails from OnePlus IN75-D347-EDD0-5E87 IN3A-06E2-479D-86AF INB8-0B37-018E-1A59 Please claim with in 5 days, PM me you have any questions
  18. R

    Post OnePlus X Indian Invite Sharing Thread

    Hello guys, Got 3 invites to share, got them as emails from OnePlus IN75-D347-EDD0-5E87 IN3A-06E2-479D-86AF INB8-0B37-018E-1A59 Please claim with in 5 days, PM me you have any questions
  19. R

    Post [DISCUSSION] OnePlus X Indian Thread

    Hello guys, Got 3 invites to share, got them as emails from OnePlus IN75-D347-EDD0-5E87 IN3A-06E2-479D-86AF INB8-0B37-018E-1A59 Posting in the invite threads
  20. R

    Post M for crespo (all works, sources, etc)

    Pico version of opengapps is the smallest gapps I could find, but even that causes the rom to slowdown. http://opengapps.org/
  21. R

    Post [EOL] [KERNEL] [I9300] [Samsung JB] Boeffla-Kernel 5.11/6.9/7.9 (23-10-2015)

    rp158 - reducing the build.prop variable ro.telephony.call_ring.delay to 0 did not help.
  22. R

    Post [EOL] [KERNEL] [I9300] [Lineage14/CM13,12,11,10/Omnirom] Boeffla-Kernel (28-03-2018)

    Ok, I have reverted to backup of arter97's 12.3 with stock kernel, not hitting the issue now. Will lookout for the fix from CM
  23. R

    Post [EOL] [KERNEL] [I9300] [Samsung JB] Boeffla-Kernel 5.11/6.9/7.9 (23-10-2015)

    rp158 - I did not notice issue with stock kernels on JustArchi's and arter97's ROMs, I am using the arter97's latest v12.3. I will check if there is any improvement after reducing the build.prop variable ro.telephony.call_ring.delay to 0 and report. Lord Boeffla - After installing the kernel...
  24. R

    Post [EOL] [KERNEL] [I9300] [Lineage14/CM13,12,11,10/Omnirom] Boeffla-Kernel (28-03-2018)

    I have been using JustArchi's and now arter97's CM12.1 roms. I installed the kernel 4.0-alpha7 few days ago, I appreciate improved sound quality. The issue I am facing now is that- when a call comes in the phone starts ringing, but the screen takes about 10 secs to come up making accepting calls...
  25. R

    Post [EOL] [KERNEL] [I9300] [Samsung JB] Boeffla-Kernel 5.11/6.9/7.9 (23-10-2015)

    Hi, I have been using JustArchi's and now arter97's CM12.1 roms. I installed the kernel 4.0-alpha7 few days ago, I appreciate improved sound quality. The issue I am facing now is that- when a call comes in the phone starts ringing, but the screen takes about 10 secs to come up making accepting...
  26. R

    Post Not able to boot on a clean install- i9300 with TWRP 2.8.6.1

    I had tried 'pa_i9300-5.1-20150520.zip' also, it showed the same behavior. I don't flash gapps on the first go, I boot with just the rom and later reboot into recovery and load all the zips.
  27. R

    Thread Not able to boot on a clean install- i9300 with TWRP 2.8.6.1

    Hello, Trying to install latest PA 'pa_i9300-5.1-20150528.zip' on Galaxy S3 i9300 using TWRP 2.8.6.1. Zip installs faster, shows no error. I select the reboot option, it reboots and sits on PA loading logo I have been using CM12.1 by JustArchi for some time, thought of giving PA a try.
  28. R

    Post [ROM][4.4][NIGHTLY] OmniROM 4.4 for GT-N7000

    Outgoing call suddenly stopped working Hi, 3 days ago put omnirom 16th nightly from stock 4.1.2, everything was working fine. Yesterday, mother called and rejected the call to call her back, but I was not able to. Tried a few things including dirty-flash on latest nightly, but only full wipe...
  29. R

    Post [ROM] [DISCUSSION] Official CyanogenMod 11 Nightlies [4.4.4] [GT-I9100]

    Hardware issue So I put back the stock Samsung rom, tried to test the mega cam from service menu- got the 'Data line fail' error. Hardware problem then. Found this thread, where the user was able to solve the issue, will try this and see if it fixes the issue...
  30. R

    Post [ROM] [DISCUSSION] Official CyanogenMod 11 Nightlies [4.4.4] [GT-I9100]

    still crash on cam open Hi, I tried this, and then tried complete fresh install on latest nightly, still the crash occurs. Adding latest logcat. What happens is back cam doesn't show any preview, and selecting the capture option crashes the app. It works fine when using front cam. Is this a...
  31. R

    Post [ROM] [DISCUSSION] Official CyanogenMod 11 Nightlies [4.4.4] [GT-I9100]

    This is what I was dreading, will try the wipe over the weekend
  32. R

    Post [ROM] [DISCUSSION] Official CyanogenMod 11 Nightlies [4.4.4] [GT-I9100]

    Camera crashing Clearing both DATA and cache also didn't help. Attaching new logs.
  33. R

    Post [ROM] [DISCUSSION] Official CyanogenMod 11 Nightlies [4.4.4] [GT-I9100]

    Getting crash on camera launch even on M9 Hello all, I am still getting crash on M9 build also, please find attached the logcat for analysis. Already tried clearing the cache of Camera app. Regards, Rob