Search results

And to think all you had to do was search/peruse the other XDA (main Ford SYNC) thread and you would see a number of posts explaining that changing the "5553" code to "5753" (enabling "navigation in motion") has the consequence of removing all Sirius navigation goodies.

In ForScan go to the IPC module, under 720-01-01, change E5C0-29BE-24D9 to E5C2-29BE-24DB. That will change "compass" to "Navigation" in the right hand cluster/display next to the steering wheel.

That worked perfectly! Thanks!

Just as an update. I've got everything up and running. I'm on the latest Nav app (AF) and I purchased my license through vincentka (I have no doubt the png method works, but it was inexpensive to buy the license from him and I would be rest assured it would always work). I downloaded the A7...

Tedi, Can you explain in more detail how to do this (walkthrough)? I would like to disable the navigation in motion, but retain/keep all the siriusXM traffic.

Deleted... I'm a dope!

Just to add to this: I was struggling with this as I just purchased the firetv stick and I have an iPhone. After sideloading the Xfinity TV app and settings.apk., this now works perfectly for me: http://www.amazon.com/dp/B00BX0YKX4 (alternate: http://www.amazon.com/dp/B00BALK9CM) if you hold...

6.0.4.5

Sorry. I should have been more specific. I am referring to the 10.2 nightlies: http://download.cyanogenmod.org/?device=ovation

If I try and update to the new ovation nightlies I will get an error in CWM recover. Something to the effect of "asset prop go", blah blah. In order for me to successfully update, I need to delete the first lights from updater.script file: assert(getprop("ro.product.device") == "ovation" ||...

That was exactly my problem as well! I tried everything in this forum, but changing to a class 4 card worked on the first try. Thanks!

I like Android Assistant. Easy to use and really improves battery life too. https://market.android.com/details?id=com.advancedprocessmanager&feature=search_result#?t=W251bGwsMSwyLDEsImNvbS5hZHZhbmNlZHByb2Nlc3NtYW5hZ2VyIl0.

Yup. You're screen is pooched. You can try and find a 3rd party screen replacement overseas, but your best bet is to send it back to the states and see if you can get it repaired or replaced under warranty.

No problem at all. I got mine from overstock.com and it took me a few minutes on chat (just as long as it took me to give them my address) and a new charger and cable is on the way.

This happened to me as well. When you're on 1.2 or above, the phyical internal partition (the 8gb drive) is altered. Therefore going to 1.0.1 doesn't recognize the partition created in the higher firmware. Upgrading to 1.2 or 1.3 will get the 1gb partition/available space back.

So, now I've tried both on my hx2110 (the 4PDA and PDAVIET) version. Just looking to get some other opinions before I decide which one to stick with. They both perform the same and have identical functionality (from my experience, at least). The only differences is that the PDAVIET version...

Sounds good... Let us know how it works out for you. I can help you out further if need be.

I had the same problem at first. You have to run the rom using the original (L) rom first. Then after the first screen ("Welcome to the iPAQ update utility...") after you click next, there is another "pause" before you have to click next again, the next screen will say "verifying information...

I've got an hx2110 and my memory states the following (with WM6): Storage: 14.91mb In use: 5.03mb Free: 9.88mb Program: 53.58mb In use: 17.98mb Free: 35.60mb I have nothing running in the background and nothing installed other than wm6.0.

I did not go to 1.00.00.L from WM2003, I went straight to 1.00.00.H and it worked just fine. I'm even willing to bet that I could have gone right to WM6 from 2003SE using the boot loader. Once the HP thinks that it is about to install one of the WM5 versions and you switch it with the WM6.nbf...

OK! I wasn't reading the directions completely! I'm now running WM6.0 on my hx2110. It works great! Much faster than previous versions. Basically, I was renaming the files and placing them in the hpRUU folders to soon. I haid to wait until the hpRUU program gave me a choice of upgrade or...

I've tried everything. I've tried to move the hpRUU .exe program to the 1.00.00.H and I've tried to move the 1.00.00.H ROM to the 1.00.00.L folder and rename the 1.00.00.H ROM. I've tried any combination I can but I keep getting the invalid SKU! error. I've tried both versions of the...