Search results

Thank you man... It works for me...

Thank you for your help :)

Currently I am having MaximusHD v3, which is based on 4.4.2 & sense 6, with Hboot 2.49 and kernel 3.4. 10-g70fa445 [email protected] #1 SMP PREEMPT & S-ON......all what i wanted to do is having D2W.....

Mine is htc one m7 802w DUG ....the middle eastern version

I know, but when itry to install any custom kernel like this one or elementalx it ends up successful,but when iI check the software version,ifind no change...as if nothing happened.. Itried this one from the twrp and after it finished,the mobile didn't start and stuck on black screen...so ihad...

I know that this is not the place for S-OFF....if you follow the discussion, you will find that I just needed to install a kernel to D2W...so, I tried several types of kernels like Elementalx, but it could not be installed.......and here, I even tried the 802xtreem, but did not work too......and...

I tried this, but it always say that the Kernel is protected against firewater.....so, it never worked...I tried also rumrunner....but, same story.....

then how can I make S-OFF with my current status?

I have htc one m7 802w with the latest 4.4.3 middle east stock rom and Hboot 2.49....after unlocking and rooting it...I tried to install custom kernel, like elementalx several times, but it goes very smooth during the setup, then finish successfully and when I boot, nothing is changed, it keeps...

Please I need the following ROM urgently: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip could anyone upload it on a proper share place to download it please.

how did u manage to get into bootloader hi, um facing the same problem and can not reach the bootloader screen....how did u do so... please help

I had a problem I made a mistake and installed a KJAM Custom ROM to ma Prophet...it ended up that the Prophet could not start (Black Screen only) and I can not lof to the bootloader. from what I read in this thread is that the wires case could be helpful to enter the bootloader (coz I can not...

Hi, By mistake I put a custom ROM for KJAM on my S200...This ROM is used before u start unlocking CID. The ROM went ok in the setup, and then it reset the device. After that I could not even see anything, as the screen was black, with some white light flashing...& and the power, bluetooth LEDs...

New IDEA Guys I am having another New Idea concerning the W2K. Again before I start, it could be a dream.....so, just let me dreaming (I am not a programer). IF we analyzed the pros & Cons of the new W2K compared to 2003SE, we will find that (from my point of view): 1- New Memory Structure...

It think u might find the programs of the old Ext. Rom......Win2003

From Where to get W2K 1.6 Hi Buzz.....You are the best....thanx man for all what u did...and what u will do for us.... I am interested to have the New version on my PPC, but from where i can get it, i could not find it on the FTP.......is it there yet?

Thanx Johnz, the link starts to work normally by it self, using the same link that I have. Now, I got two versions, 1.50b & 1.50f. WHICH ONE SHOULD I USE?

Thanks Buzz, you are the best. I will start the upgrade, but the FTP does not work, seems down. a :cry: ny ideas? :roll:

I am CDL XDAII, do I have to use the patch and change the Provider?

Steps for WIN2005 Upgrade Sorry for this silly Question? I know I am too late, but i am really excited about the results you ve reached guys. I 'd like to join, but I could not go through all the replies to catch up what you were through. Therefore, I just need a small answer, is the final...

Yes you can, using the new version of the Caller ID 1.2. Search for it in the forum. I am sure u will find it. If you can not, contact me on [email protected] and I can send it to u.

Sowftworkz, What is this patch for? is it the fix for Auth. Problem ?? Please say yes ;)

Ok Guys, here are what i got. You have two ways: 1- Install the merged rom made by sin (you can find it in the forum), as it includes the bluetooth fix. ( This is what I tried) 2-a- Install the Bluetooth Handsfree fix, I will attach it for you. After installing both updates, you should try to...

HBH-200 I had HBH-200, which got a caller ID feature. At the begining it could not show anything on its screen, until i installed the HandsFree profile update. It started to show the caller Numbers only. I could not make it show the Caller Name. Any ideas how can we make it?

Hi, There are many ways to get the Bluetooth with Caller ID works on the PPC. The trick is that the Caller ID needs a Hands Free profile, which is not standard in the PPC. After using one of these ways, you will end up having the the caller number only appears, but no names. If this is what you...

Hi, I ve been working in this issue for a couple of days, since I got HBH-200 blutooth headset. This type of headsets require Hands Free profile in order to activate its Caller-ID functionality. Unfortunately, non of the available ROMs in the market got this option, except one. It is ROM...

Same Problem I am having the same problem in here. IMATE with HBH-200. But the caller ID and list do not work. just the answer/reject key. Can you provide me with this WM2003SE 2.20CHS which make the caller ID work. And does it show the number of the caller or the name?

Same is here

i was using ROM 1.52, then upgraded to 1.72. and I had this problem too, and if you even try to open the phone options, it would take a very long time to show u the option window. I donnu , but it seems there is a problem in the radio version in 1.72. I just downgrade back to 1.52 and it is ok.

Hi Zendrui, if u can remember me, i am the one who told u that i had a hard rest when i installed V4 with 1.72 ROM. Kindly note that it happaned again to me, but with V4 Beta 2. What happ exacltly is that: 1- I found out that the bluetooth icon disappear sometimes after soft rest, 2- In...

You have two options, either to go to Microsoft site, Pocket PC section, then download a fix for the MSN. The other option is install the lastest ROM 1.72, it includes this fix

Guys, Check the setting of the ActivSync, most probably you will find a schedule for synchronization is set every certain time. So, you have to switch it to Manual Sync. I think this should soulve your problem.

Hi there, As you are from Egypt as I can see, u might be having the Arabizer installed on your IMATE, is not it? if so, usually it has some problems with the PZP. So, the option is to stop the arabizer first, then configure the settings of the PZP then reactivat it again. Concerning the speaker...

Donnu, but this is wat happened with me. Maybe it is coz of the Arabizer that I am using...specially that it is used to make problems with PZP. I donnu really and can not commit.....heheh and not ready to try it again.

It would be great if you can integrated this tool with the calendar, in the way that, if you set an anniversary in your caledar (like a birthday or somthing) you can find a button to schedule an SMS to be sent with a specific message. Automatically, the message will be sent in the day of...

I think I noticed the same thing in here.

Yes , I told u before it is Beta 2.0

It is ok, hope that u can solve it, and i am sure u will :wink: Note: I would recommend and option in your program, I think someone mentioned it before, but I would like to make it more proffesional. 1- Integrate your program with the calendar, as when someone create a new appointment, he...

HKLM/software/apps/Zendrui PocketZenPhone. Yes, Beta 2.0 was working, but i think there was a problem i noticed a couple of days ago, that the Bluetooth icon disappear.

Trust me I am not angry for the hard reset issue, it is ok for me, I mean you did a lot for us so, if a hard reset is the cost, I think it is less than the fair price for your work. Steps: I used to use Beta 2.0 coz the speaker volume was working properly for me. I started by disabling the...

I will check the scenario that you said for the speaker and give u a feedback, however, having the option to adjust the speaker for each profile was better than having it disabled. am i right? For the other case, I used to have Beta 2.0 installed, so, I removed it first, then install version...

Hi there, This is my first time to post a reply in here, however i was following up your program and others reply. I noticed somthing that you were committing that the speaker volume is not working for now even in version 4.0. I just wanted to tell you that I tested most of your beta versions...