Search results

  1. A

    Post [Q] Boot Loop while charging - no charge

    So I have already initiated the return process with amazon and it should be pretty painless. I have almost 3 weeks to send it back, so if anyone has any tips/tricks or ideas I'm more than open to try them....The watch is 100% stock as far as firmware or root is concerned.
  2. A

    Thread [Q] Boot Loop while charging - no charge

    Hello, I've had my G Watch R for not quite a full week so far and I've really enjoyed it. Two days ago, I believe that I let the battery die so I placed it on the charger before going to bed. When I woke in the morning i grabbed the watch off the charger without looking at it. Just before i...
  3. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    Firewater and RumRunner are the only two standard ways to get S-Off, right? I tried RumRunner and it simply gets in the pouring, pouring, pouring loop and then says pray, restart and try again...no amount of prayer seems to let it be successful with s off. I ran Firewater twice, the first time...
  4. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    I downloaded the maximus rom and flashed via TWRP with success! No longer fast boot bricked! Thanks for the suggestion Shwet! With that said, am i pretty much gonna need to stick with the maximus rom for awhile now, or can i proceed with trying to get the stock european RUU? Since i have a...
  5. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    It either came with that version, or it was applied as I went through all of the available OTA updates before I started messing with the phone. Does that mean I have essentially a fastboot mode only brick?
  6. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    Thanks once again for your responses Shwetkprabhat, really appreciate getting a hand here. requested getvar: C:\tools> C:\tools>fastboot getvar all (bootloader) version: 0.5 (bootloader) version-bootloader: 2.49.0000 (bootloader) version-baseband: U3.14.3509.14 (bootloader) version-cpld...
  7. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    I'm also on TW recovery, not CWM if that matters......I've brought my phone to work today, so if anyone has any other suggestions for me, i can test them right away. Thanks everyone!
  8. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    Thanks again for the response. I renamed the zip, copied it to an sd card and stuck that in the phone. Rebooted to boot loader again and it automatically started checking the zip, then loading it, then in black it said flashing zip. then I appeared to be at the boot loader screen again this time...
  9. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    Strange, it appears my initial response was deleted...anyways flashing that zip is still failing, but with a different message. C:\tools>fastboot flash zip PN07IMG_M7C_DUG_K44_SENSE55_MR_HTCCN_CHS_CU_4.21.140 2.3_Radio_1237.28.34.0106_release_309439.zip target reported max download size of...
  10. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    I have verified that the MD5 matches on my downloaded zip file as well.....
  11. A

    Post [Guide] HTC Dual Sim 802w (China Unicom), apply WWE European RUU, OTA & CWM or TWRP

    Ran into flashing issue, looking for a little advice Hello everyone, I'm not a newb at flashing roms or recoveries, but I will say I did not fully read the thread before diving in with my 802W. I ordered it from MobiCity.com, and its the Chinese Unicom version. The first thing I did was fully...
  12. A

    Post [Q] Xperia Z, Hard Brick after battery drained

    Ahhahha it came back alive! I had tried pretty much every trick that has been suggested and it just wouldn't charge or start to boot. Left it on the main charger again last night and still no luck this morning. Again I decided to plug it into my computer's usb port( I did this multiple times...
  13. A

    Thread [Q] Xperia Z, Hard Brick after battery drained

    Hello, just about to pull the trigger on a new xperia ZU, but i wanted to see if anyone had any tricks for me to try on my Xperia Z. I was running near the latest CM 10.2 without issues for awhile now. Last night while i was bowling the battery died( nothing new happens all the time to me :) )...
  14. A

    Post [ROM][OFFICIAL][KitKat 4.4.4][YUGA] PAC-man Nightlies & OTA & Custom 0714 [AOSP]

    unable to enter hybrid menu I just flashed this rom coming form Free Xperia, and i get a paranoid settings has crashed every time i try to enter the hybrid menu...so i can't switch modes. Sorry for not reading the entire thread, i did try a search with no luck. Any tips or ideas on why i...
  15. A

    Post trying to get cm10, or hydro

    well i tried the exact same command again, and it worked this time! well it successfully flashed, and im getting the anmiated asus logo as i type! Im booted into the OS Now!!! So, im wondering if i can now try to flash a cm10 rom, or if i should stay away at this point?
  16. A

    Post trying to get cm10, or hydro

    found another thread where they suggested downloading the asus firmware, which i already had and then extracting the blob file from that. I then attempted to flash the blob file from the asus firmware via fastboot with fastboot -i 0x0B05 flash system blob...it appeared to start flashing and...
  17. A

    Post trying to get cm10, or hydro

    So i found a method of pushing a zip file through ADB and that seems to work well for getting my rom files to the sd card. I copied the hydro rom over and installed it via recovery. Same story boot loop. I then tried a third rom with high hopes and no change. Anyone have any ideas whats going on...
  18. A

    Post trying to get cm10, or hydro

    thanks for the response Krab, i replyed to your PM as well
  19. A

    Post trying to get cm10, or hydro

    a brand new tf300t that wont boot is not a good thing :) I'm sure i screwed up somewhere, i only hope that with access to recovery and fastboot i can get this tab to boot again.
  20. A

    Post trying to get cm10, or hydro

    So all i have access to is really recovery and fastboot. I have tried flashing a couple boot files via fastboot and now i seem to be in a boot loop as opposed to stuck at the asus logo. recovery and fastboot are still accessible......ears wide open as far as to where i should look next. thanks...
  21. A

    Thread trying to get cm10, or hydro

    Hello, ill start out by saying that ive had quite a few android devices in the past. I usually root them and install custom roms so i am familiar with most commands. I got my new tf300t from newegg when they had their special online. I proceeded to download the OTA update to JB. I then...
  22. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    Rom is looking great so far Kernel! I've noticed 1 single random force close from the marketplace, but other than that, its been smooth sailing.....and I mean smooth!:D
  23. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    damn, well i appreciate your efforts. Would it be worth a shot to try flashing the domination rom, or any other first? I know i read at some point there was an issue when coming from a domination rom to yours....what was it? ---------- Post added at 08:58 PM ---------- Previous post was at...
  24. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    No worries, I've never attempted any OTA updates :) Just about done downloading here at home. I will see about checking the MD5 if it fails here too. Thanks again Kernel ---------- Post added at 08:05 PM ---------- Previous post was at 07:50 PM ---------- Just went through the steps again...
  25. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    well cool, at least you could tell what its missing. Just to reiterate, this phone was purchased from an ATT store in las vegas around new years. The only mod I've done is gaining root access and installing the latest CWM. KernelPanic, are you on an ATT nitro as well, or something like Bell? I'd...
  26. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    I should be flashing the actual rom through CWM right? i actually tried renaming the zip to update.zip and then flashing by installing update.zip from SD card, and then also by leaving the name intact and selecting that specific zip to install from the SD card; but all done through CWM back at...
  27. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    thanks for the quick response kernalpanic Yes I cleared cache and dalvik no wipe on the data or factory reset yes i did format /system I've already gone back to stock because i did a backup with CWM. Gone back and forth a few times now with no luck. Even tried .3 final that you have posted and...
  28. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    So it looks like im in a boot loop.....i had a working CWM(the latest) recovery, followed the steps to a T....and on reboot i just get the cycling LG logo with the fast colors racing across it. Im going to give it a couple more mins just to make sure its not taking excessivly long to boot. not...
  29. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    Thanks Gordon, I'm an idiot and didnt look a couple posts down from the first.;) I'm still on the original untouched ATT rom, so ill give CWM and this rom a try a bit later this afternoon.
  30. A

    Post [ROM][2/29] Kernelpan1c Nitro HD - 0.4

    where is 0.4 located? i am only seeing .3 on the first page and I would like to try out the 4 beta....thanks!
  31. A

    Post [CWM][24/01] ClockworkMod 5 Recovery For LG Nitro HD

    Got my ATT Nitro HD about 2 weeks ago.....following this thread;)
  32. A

    Thread Looking for advice/help with flashing Sapphire

    Hey everyone, Its been well over a year since i picked up my Sapphire...i decided I wanted to try to get it up to GB so i tried a couple different roms and each one i tried to flash basically told me that it couldnt find the script file. Found a thread that said to flash a different recovery and...
  33. A

    Post Galaxy Tab Email Client Beta 2

    There is definitly an issue with the tab email app, and exchange 2010sp1. There are specific email variables that will prevent your phone from syncing the inbox. Things like web links and blank subjects will for sure hang it up. I cleared out my inbox from my desktop client, and then I was able...
  34. A

    Post SteakDroid 1.9.0( aka The Final Frontier ) Release Post

    If anyone else is wondering about exchange 2010 sp1 and the tab app....Mines bene working fine since I cleared out my inbox...there are definitly some common variables in specific emails that WILL cause the tab app to fail to update emails.....so even though mine is working, its kinda like a...
  35. A

    Post SteakDroid 1.9.0( aka The Final Frontier ) Release Post

    So, I do believe I have email flowing properly into my inbox with exchange 2010 sp1....Now dont laugh at me, but I have kept roughly 7800 emails in my inbox since starting this job....it just seemed real easy to search/sort through what I needed. Well I've finally archived about half of those...
  36. A

    Post SteakDroid 1.9.0( aka The Final Frontier ) Release Post

    bigbopper....what version of exchange are you guys running? I am actually the IT administrator for our school district, and I manage our exchange servers. We recently (4 months ago) upgraded to exchange 2010. We are currently on SP1.... Why would I need to "reset" my exchange account, and I'm...
  37. A

    Post SteakDroid 1.9.0( aka The Final Frontier ) Release Post

    exchange activesync errors Hello, has anyone tried using this latest rom with exchange activesync? I cant seem to get it fully synced up with my work email. I can configure it and it will download all previous messages except the current day...it just says connection error everytime it tries to...
  38. A

    Post SteakDroid 1.9.0( aka The Final Frontier ) Release Post

    Unless someone can check their updated baseband and confirm if what i listed above is the most recent, then I guess i will just try flashing baseband again. should I be aware of any issues flashing from 1.5 to 1.9?
  39. A

    Post SteakDroid 1.9.0( aka The Final Frontier ) Release Post

    so your positive that my baseband is out of date then? I know that I did update it at one point back when going to 1.5.1 when it was new.
  40. A

    Post SteakDroid 1.9.0( aka The Final Frontier ) Release Post

    Hello everyone, I would like to try updating to steve's latest....can anyone chime in on the proper steps to get me upgraded? I am unsure if my current baseband is the latest. Running Froyo 1.51 by DJ_Steve 2.6.32.9-DJ_Steve-BFS-BFQ-OC-VOL baseband: gausb1a131800-EU Since i've waiting awhile...
  41. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    @TheKenAnthony I would not wipe at this point, I would attempt to flash straight to 4.5....although I have yet to flash the latest 4.5 yet myself.:rolleyes:
  42. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    dang steve, your replys are too quick :) thats some pretty darn good rom customer service you've got going here
  43. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    Thanks for the latest update steve! If there is anything I can do to help troubleshoot the notification issue, dont hesitate to ask. @Thekenanthony- I had the same problem when I did a factory reset earlier as well. Steve just released an updated version that now allows us to factory reset...
  44. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    Thanks so much for the response Steve.....as the last guy stated, no rush at all. I just wanted to make sure you were aware that it was still present.
  45. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    sms/ringtone settings error I just flashed the update.zip for the latest update and was sad to find out that the sms notifications and ringtones are still unable to be modified under settings, just force closes the settings window. Any idea what may be causing this, and if its something you...
  46. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    notification sounds Has anyone figured out how to change the notification sounds? I dont think by default that there is a ringtne or sms notification tone set and I get the FC when i try to change them. Also i noticed that the phone locked up when i disabled mobile data roaming and then...
  47. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    been toiling away here, found another thread on modaco with diferent directions/links/files and I followed them, updated the baseband with the qd utility and then finished the directions for the "opus" streak, although thats not what mine is or ever was. fastbooted 3 image files and then did a...
  48. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    just fyi. i pulled my sd card out, copied back the v1.1 update.zip and reapplied it....no change still dell logo stuck. I then figured I would attempt to reupdate the baseband as well....update was successful, but on reboot still at dell logo. Please help!
  49. A

    Post StreakDroid FroYo v1.5.3 - ReleaseThread

    a little advice please, stuck at dell logo Hello, ive been running a 2.1 rom for a little while now, not from djsteve. So tonight i decided to move to his new rom. I went through the process of getting clockworkmod recovery going and it was a bit troublesome. Ended up finding a slightly older...