Search results

Hard to access status bar when on call due to light sensor sensitivity Whenever I'm on a call and I move my phone away from my ears and try to access the status bar by swiping down from the top, the sensitivity is too strong, thus the screen turns off almost instantly before even being able to...

tommla Installed microg via Magisk module. Just look for microg installer revived in the downloads section. Afterwards to get GPS to get quick fixes, I additionally installed mozilla NLP from f-droid. Do note that some google apps won't work properly like uber - I just use the web browser...

Latest beta ginkgo firmware (7/23) causes GCAM front camera to FC I am currently on the latest crDroid 6.8. Just a heads up that today morning I installed the latest firmware for dated 7/23 from xiaomifirmwareupdater.com. I have GCAM installed and when switching to front camera GCAM would FC...

Same issue. I reverted back to the previous version and was able to get access back

I de-googled about 2 months ago. Now I am using cr-droid with MicroG which I installed via Magisk Manager. Most of my android apps are usually installed via F-droid from their repository. As for the very few appa i use from Play Stor, i use Aurora Store App from Fdroid (its just an apk...

I'm on the previous version of twrp 3.3.1-10. To update twrp, can I do it via TWRP itself or do I have to use the method outlined in the instructions in the first post? If via TWRP, I assume it would be to install the image on the 'RECOVERY' partition?

First off, my compliments to mg712702 for bringing what I would say up to now, is the most stable and competent ROM. So thank you. That said, one bug: at night auto brightnes goes all thr way to 0 when turning screen back on. Have to manually adjust slider. Edit: Im on ginkgo with a...

HDR+ processing issue I can confirm this odd behaviour. Regardless of whether I use trcam parrot pixelcam or any other variant, I can take a picture with gcam HDR+ enhanced, indoors where its darker. The issue appears to be lighting anf perhaps the hdr+ processing engine crashes and doesnt...

I had the same issue with HAVOC OS 3.5 previously but 3.4 worked with almost all GCAMs like Parrot043s. So I was surprised when I switched to LOS 17.1 that almost all GCAMs did not work properly either. Must be something new in the source tree perhaps. Not sure. Either the GCAMS crashed on...

Thanks. Using the most current Nikita GCAM solved the issue for me. I can confirm that I am having similar issue. The headset speakers do not function at all for me. The audio always appear to come from the speakers at the bottom regardless whether I hold it up to my ears or not. This...

HDR+ on GCAM producing static images on back camera. Just clean installed the latest 17.1 with the latest 4/29 BitGapps on RN8. If HDR+ is enabled, it creates static images like below. This happens on all the GCAM 7.3 apks ive tried from...

Possible image retention solution I was having issues with all custom ROMs and screen retention on my redmi note 8. I had similar issues with my previous phonw - LG v20. Im not sure if that had a tianma LCD panel. Until i came across a thread here on XDA, regarding lowering the all RGB color...

Redmi note 8 listed as 8T since new (unified) build Hello, since the latest 3.4 unified build, I've noticed that the system is now detected as Redmi Note 8T instead of Redmi Note 8 under Settings->About->Model. Under platform, it shows: trinket, instead of gingko. This results in other apps...

I had problems with Parrot043's gcam. For now, I switched to jairo_rossi's gcam and its working fine: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1124/

Not 100% sure about this but couldnt you extract the modem driver from willow then? If so, I believe you can download it from https://xiaomifirmwareupdater.com/vendor/willow/

Bluetooth not working on latest 1025 on my H918-10p I noticed that LOS was updated to 1025. I didn't see a change log but installed it on my H918-10p. Big issue where Bluetooth does not turn not - not from Quick Settings or Bluetooth settings. After pressing on, it comes on for a bit...

After updating to 9 on my H918p last night while casually surfing phone rebooted. I think it might have done so in the daytime as well as I had to unlock with pattern. Anyway today I had a hike and didn't want to take the chance that my phone reboots while I'm recording my hike. I reverted...

After about a whole day on this along with gamma v7 can report back on no issues so far. GPS working well again. Thank you for your continued contribution and support x86cpu

I do a lot of outdoor activities hiking so gps is important to me. I noticed that with the latest updated there was an update to the GPS blob. At first it seems that the GPS was working fine but there definitely is an issue with locking. Prior to this update GPS would lock and I would get...

On my 20190911-H918-10p, the gps locks fine and appears to function properly. However when I use GPSTest, i do get funky results as shown in the screenshot below. Disregard the missing coordinate info and the top status panel as I took the screenshot before a status. Notice the negative...

On my H918 I was getting random reboots after updating to v8. I was able to isolate and repeat the reboot issue manually by locking the device and trying to unlock with the wrong fingerprint a couple of times, followed by using the right fingerprint to try and unlock. After a couple of times...

I use the termux-tools package which includes (termux-media-scan) utility.

Not sure if this is the right place as it might be a generic LOS 16 issue: I have all my music stored on my v20 external SD. I've noticed that anytime I perform a system update, the music library disappears completely and I have to reboot again to perform the initilization or force the rescan...

I did a factory reset (unfortunately) and everything works fine now.

That is actually my standard procedure. I go into advanced wipe and wipe dalvik, system and cache and then install los, gapps, gamma. Now to not get a blank screen, I have to install the adreno drivers. By blank screen I mean that the screen turns on but is all black. So the display does...

Oops!! Now I've done it. Wish I read your post earlier. I tried to revert back by doing a wipe of cache + system and reinstalling 16 WITHOUT the drivers and all I get is a blank screen after the system boots. I can tell that the system is responding but I'm not seeing anything on screen...

I am on H918p with lineage 16 with gamma 1.2. Wondering whether the following recommended downloads and drivers mentioned on the 1st post apply to 16 or for lineage 15.1 only: 1) thermal mod 2) tasha xml 3) adreno drivers Thanks

I have a Galaxy Tab s2 8" T713. While trying to pull out the SD tray the little round hole part broke off. I was able to put an SD card in fine but now trying to pull out the tray requires lot of work. I searched eBay and amazon but didn't find a tray specific for the T713. Does anyone know...

Reboot on long power button press I'm on the latest RR for my H918 (RR-O-v6.2.1-20190131-h918-ARB1-Unofficial) and long pressing the power button to enable the flashlight automatically reboots the phone everytime after putting phone to sleep. 1) I press the power button when the phone is on to...

I can also confirm WhatsApp camera glitch. Running latest RR (NON-SS 1/3 build) with Adreno drivers and gamma SS V71. Device is H918 ARB1

Just a heads up that the installer is broken with the new Magisk 18 released earlier today. There were some changes to path references so they need to be updated perhaps.

Surprisingly solid build for beta. Been using for about 5 days with Magisk 17.3 and no gapps. 100% clean install and manual app restores and config. I'm getting slightly better battery life on standby with this at 0.7%/hr drain vs 1.0%/hr drain on LOS official 15.1. Wifi enabled and no apps...

Ive been eyeing this thread for a while and looking to finally replace my Nexus 7 2013 since I got it back in December of 2013. Its SLOWLY showing its age atm as it has been a useful daily driver to me. After outfitting it with a Zagg 7" keyboard case, I left my main laptop behind when I went...

Thanks for the clarification. I'll leave this experiment to some other brave soul as the v20 is my daily driver. :D

Tested on LG v20 H918, Resurrection Remix, Gamma Kernel: - Only wide angle camera mode works. Cannot switch to main camera except in portrait mode. - Night mode (Night Sight) takes pictures but does not show on live view. I'll keep it installed as my secondary camera app just for night mode...

Upgrading the modem firmware beyond H918 10p? Can I upgrade JUST the modem firmware from newer KDZ files? - I have a H918 that was downgraded to 10p - Bootloader has been unlocked; TWRP installed using lafsploit - Stock rom removed and currently running latest Resurrection Remix ROM, root...

Was wondering, do you charge your battery full or limit. I use MCS to limit charge to about 84%. I also run a slimmed version of RR - delete APKS I dont use and run your Gamma SS Kernel. I have an extended battery from Perfine is gives me about 1.5 days of normal usage. Surprisingly if I...

Perhaps you are right. The case I recived other than having many scuffs was loose. The Spigen likewise is also just a case. The backcover that Im taking about is the piece of tin or plastic that covers the internals (like the metal backcover that comes with the stock lg phone). A case should...

No backcover - could be problematic :o - I had it delivered today and after about 3 hours of use ended but returning it because it does not come with a backcover. It comes with a rubber case that is somewhat loose and will no doubt allow dust and maybe even moisture to leak into the phone...

I use RR non-SS along with gamma kernel SS kernel specifically because, instead of treating the second screen as a secondary display, it treats the whole area as one display. Kind of like having a notch thats aligned to the left instead of being in the center -\_(o_o)_/-. The only problem is...

Redownloded v40. Working as expected. Thanks again for all your contributions.

v40 not working. v39 works as expected Not working for me. Im on RR-O-v6.2.1-20181011-h918-ARB1-Unofficial (Non-SS). Resurrection Remix (non SS) with your v39 worked. Installed v40 and second screen does not work. Everything is bumped down to the main screen and second screen area is just...

Status bar alignment This is a good start. I see it as well on my using non-SS LOS 15.1 9/3 on my H918. Im just wondering if its possible to align the screen so that the bottom of the status bar aligns to the bottom of the notch. In affect, push down the status bar so as to not crop the main...

no speaker output for AAC encoded audio (M4A) First off, My first post on the forum :). But have been using and following the threads here for years. More so recently since I switched to my first android phone ever from Apple in well over a decade. I want to thank x86cpu and all others devs...