Search results

This has happened to me with this and the previous builds. It takes a long time to load. Sometimes loading and sometimes boot looping thought it may have been just my tablet but it happens to my brothers' as well. It became too much to get to load that I had to revert to an earlier carbon build...

Okay so I re-downloaded. It's now back to normal. So I guess a fluke in the first download. Sent from my Sero 7 Pro using Tapatalk

Dave, I'm going to re-download and Start from scratch. I will let you know result. Sent from my Sero 7 Pro using Tapatalk

It's definitely not a charger issue for me I've tested 3 different roms. Only the latest cm11 is a problem. And tested with different chargers as well. Sent from my Sero 7 Pro using Tapatalk

Does anyone anyone else have a problem with charging on Dave's last update. Mine seems to not charge as quick. I've checked everything out. Update: It charges but super slow. 76% et to full is 5 hours. I re-flashed dopa2 and 77% et to full 1 hour 37 min the same with taktik. Sent from my...

I use the newest cw recovery to switch back and forth with no problems. Sent from my Sero 7 Pro using Tapatalk

I just flashed this new build. my wifi would not connect and I found that my Mac address is all zeros. . Any ideas.? Sent from my SCH-R830 using Tapatalk

Try with non-overclock kernel I had the same problem I went back to original kernel and it worked Sent from my Sero 7 Pro using Tapatalk

randomblame any chance to load updates to goo. I'm? Sent from my Nexus 7 using Tapatalk 4

I Sent from my M470BSA using xda app-developers app

What have you tried to correct the issue? Make sure the date and time are correct, sometimes mine resets the date and correcting that reconnects Wifi. Sent from my M470BSA using xda app-developers app

Just flash zips, but CWM will ask if you want to disable reflash of stock recovery choose yes. And from there you can flash mods and such. FYI It will not wipe DATA. Sent from my M470BSA using xda app-developers app

How to manually install stock recovery. 1) Download this https://www.dropbox.com/s/3b4otl5437uscew/Recovery.zip 2) Extract to desktop or easily accessible location 3) Do not open. Simply right mouse click and select open command. 4)Power device into fastboot. without cable attached pressing...

Sero 7 pro please Sent from my M470BSA using xda app-developers app

The stickies do tell you if you had read them you would know. Or maybe you want to take short cuts by asking for help and not reading. Calling a Senior Member an ass simply for not holding your hand is inappropriate. There are no shortcuts here go back to the general forum a find what you need...

It just connects, there is no toast message or such. Sent from my Dell Streak 7 using xda app-developers app

I am running the same (r8). My docks hdmi works fine. Perhaps trying another TV or monitor will work. I use 2 different tv's and cables and I have not had that issue. Sent from my Dell Streak 7 using xda app-developers app

Okay thanks. Great strides so far. Sent from my Dell Streak 7 using xda app-developers app

Can you place the file size info in the change log. This will help us make sure we download the full package. I have had trouble with goo stopping too soon. Sent from my Dell Streak 7 using xda app-developers app

Re: Unoffical CM10 - Dell Streak 7 Alpha v1.1c Giveen, You my friend are a commited gentleman. A many thanks to you sir for your dedication to keeping the streak 7 afloat. thanks to geramy and all others that have helped. Sent from my Dell Streak 7 using xda app-developers app

I currently run the latest adw on 514, cm9 and honey streak. I have had no problems so far. Sent from my Dell Streak 7 using xda app-developers app

Works as posted. It did take me a bit of to get set up. Thanks again. Sent from my Dell Streak 7 using xda app-developers app

I flash my cwr backup from stock 514 and saved the app with a backup app(ultimate backup), it would restore but would not load it didn't even give me icons for it. I still looking at other ideas. Sent from my Dell Streak 7 using xda app-developers app ---------- Post added at 09:14 PM...

I had the same issue trying to download x-planes 9 on 5.0.1, it will say "can't download to sd card or internal". It's not the store itself just certain apps. That is the only app I have come across something far. Sent from my Dell Streak 7 using xda app-developers app

Okay, I understand.

Yes maybe you had a misunderstanding of what I meant in OP. I meant that I used CWM 5 to backup then immediately I flashed the r8 zip with cwm 5. then I rebooted to test. So yes I had 5 until I rebooted. I said that in post 3 above.

The r8 zip package has a recovery image in it. Just like any nandroid.. It replaced mine with the one that has dj steve's signature in it. Sent from my Dell Streak 7 using XDA

That's what I thought. I shut down. After booting up StreakDroid I then rebooted into recovery and cwm5 was replaced by version 4. And it would not load my nandroid correctly so I reloaded cwm 5... Make since or not that is what happened. Sent from my Dell Streak 7 using XDA

I recently researched if HoneyStreak r8 could be flashed using CWM onto Stock 514. I did not find anyone who had tried, nor did I ask. I did get this to work. The main reason for doing this was so that I could use mostly Honeystreak and then keep a 514 ROM so I could use the dock without...

UPDATE: I did try the TWRP port on my honeycomb. It works to the extent of navigation with touch screen( smooth I may add) but will not save a backup correctly. it will not mount data. I assume it is because it handles it differently because it's made for ICS not honeycomb.

Go back to the general forum where you posted this question and look at the first post.

Rom manager cannot boot your device into recovery( at least not for me) you can boot into recovery by powering off then press both: volume up and power. you will see a screen with choices you will need to choose number 2 and it should boot into recovery. I would suggest that you start over...

Honeystreak partition method I wanted to test a theory on this myself. So I will start with saying I am running 3.2 official with 514(rooted). I use 514 to be able to use my dock. Love me or hate me. 1) I did a nandroid backup on my sd card. I used my app backup tool to backup my apps...

Try this I have not yet had a chance to try TWRP. But if all you want is access the sd card from CM you will need 5.0.2.8 which is here. http://mirror2.streakdroid.com/manii/misc/ClockWorkMod/S7_3.2-5.0.2.8.img Flash this and you will be able to Nandroid to Sd card. The TWRP is the first...

Thanks for letting me know it may work on Honeycomb. I will test this myself.

I thought I read that your twrp port was for ICS B4. Unless I missed something I think he has Honeycomb. He would then need CWM 5.0.2.8 correct? Sent from my Dell Streak 7 using XDA

The Dell service tag and ppid are your device identifiers for any service issues with dell since your probably rooted any warranty you may have had is void (supposedly) . The mac address is probably the main concern I'm sure. so you dont have to change the p23 at all, unless you want to.

I haven't used a generator before. Changing it may work as long as you dont have a duplicate in your network. Im not 100% sure though. Also the ppid and service tag are printed in the sd card cover and on the box if you have it. I forgot to mention this in my post before

I did not take mine apart to find the mac yet. since mine was not having the conflicts I decided to wait.

GUIDE DO THE FOLLOWING AT YOUR OWN RISK DO NOT BLAME ANYONE BUT YOURSELF FOR FAILURE. I'm assuming this is honeycomb. and if so here what I did. I'm not sure you can change the mac but here is a guide to help. You may can even change the IP addresses in your devices to a static IP...

I was on the play store today searching for the Directv app, and behold the HBO go app appeared for my S7. I downloaded and used it. works great. FYI if anyone is interested in having it. Streak 7 Stock honeycomb 514 (rooted, of course) Don't know if it works with others.

I will answer this one. You will need the HoneyStreak R2. To get the version that has DJ STEVE'S image R2 is the one I saw it on. And this is one you have to NVFLASH. I do not know if any version in between r2 and r8 has it or not but I know r8 has a different one. All of them are here...

I AND THOSE WHOSE LINKS ARE USED HERE ARE NOT RESPONSIBLE FOR DEVICES THAT HAVE BEEN: LOST,STOLEN, BROKEN, THOSE THAT HAVE BEEN THROWN INTO A WALL, BRICKED, OVERHEATED, STRUCK BY LIGHTNING DAMAGED BY HAIL, TONADOES, CYCLONES, TYPHOONS, HURRICANES, RAN OVER BY AN AUTOMOBILE, CHEWED BY ANIMALS, OR...

Yeah I believe they did too. They are way too similar for me to believe otherwise.

Actually anything with DJ Steves logo is not official its honeystreak. check ics deveopment on xda and tablet roms in there it explains how to go back in several posts.

Search here... try this http://forum.xda-developers.com/showthread.php?t=1558266

Search Search "T-mobile" and you will find some help there in previous posts.

Help with gingerbreak Need some help I ran gingerbreak and had root for several months. My phone shut down and the only way to get it to reboot was to hard reset. As I did this of course the superuser was still on the phone, however I lost root. I tried to re-run gingerbreak to re-root...