Search results

Could more users please reboot note 7 and report in how much RAM is availible after Touchwiz boot, thanks.

With CM on op3 will 1080p 60 fps recording work?

Oneplus dash is based on oppo vooc Oppo vooc http://www.oppo.com/en/accessory-vooc-usb-cable Look at output spec, would be intresting to know full dash spec.

When you dont get dash what volt and amps do you get? 5v 4amp is only with vooc charger and vooc cable. It is important to know when purchasing non vooc cables for a non vooc charger so you purchase a cable that can handle the amp draw.

Can someone that has a one plus 3 check the vooc power charger for any output numbers volts and amps. Thx

Hi When you charge using a non vooc charger like for example Qualcomm Quick chargers Samsung Adaptive fast chargers with different types of usb a to usb c cables 1. What charge does it do, 5 volt 2 amp for 10 watts? 2. Can it choose different types of Volts and Amps or is it always one...

I disliked my Galaxy S6 920F 128 GB before MM, now i think its atleast workable but this was my last Samsung phone, game over. Already orderd my next phone One Plus 3, less bloat more developer friendly.

On 3.0 MM RC1 have anyone checked RAM usage after boot up?

Ive repaired EFS Partitions with scripts downloaded from links at xda. For example i trashed my EFS partition on my note 3 so it caused hard reboots after android booted up and it couldnt be fixed with anything else than the EFS partition repair scripts. Edit: friend repaired his Note 4 also.

if someone have this installed, can you check system RAM usuage on this rom after boot? Touchwiz uses 1,2 to 1,4 GB RAM for Android system after boot. It would be intresting to know how much RAM this unoffiical (cm13) release use after boot. Thanks

Best news ever because am starting to hate this Galaxy S6 128 GB.... Please rescue me from Samsung's crappy Android software. Last time I ever buy a phone that isn't ready to be flashed CM directly after purchase.

Using X version and finding it to be very laggy. I wanted to use my normal fix for this by changing the interactive govenour settings but they cant be edited in Synapse or kernel adiutor? Edit: Govenour settings cant be edited in trickster mod either, "enforced mode" must be set to 0 since low...

I didn't buy this phone to use only use little a53 cluster and only get galaxy s3 performance. ;) If you buy expensive performance, enable it.

IF you set enforced_mode to 1 on both big and litte cpu cluster the phone will use the big a57 cluster for more applications which will make the phone more smooth and 60 fps gui experience since its a lot faster than the little a53 cluster. Example Boat browser use little on setting 0 Boat...

Bluetooth headsets work, Xileforce is there a fix planned for this? Edit: missed the quote button, talking about Wired headsets not working during call.

Do anyone here also have no sound with wired headsets when calling and answering?

had 1.7 with vindicator kernel performed dirtyflash to 2.0 and got into a bootloop.

Changing LMK settings didnt improve multitasking but adding these in build.prop and changing the exting ones to this did help. Thanks.

Ive changed them to match youre settings, ill report back later. Mine where set with much higher vaules. thanks.

No difference in multitasking, applications still drops very fast.

Kernel works good except ram management, every application seem to get killed very early?

Hi Running cpu cores at higher MHz base clock will drain more battery than using stock MHz but when the cpu cores idle or perform very low % utilization regardless of base MHz clock they draw significantly less watt compared to when they are on heavy utilization or maximum 100% utilization...

Ok, check post below. ---------- Post added at 03:33 PM ---------- Previous post was at 03:28 PM ---------- Thank you Arter97! Amazing work on Kernel version 5.x, My personal responsiveness and performance settings adjustment for this kernel. Updated to version 4.0 DO NOT use this if battery...

5.0 kernel with my crazy kernel auditor performance settings is incredible smooth in browser and messenger, (also using adaway). Just ran a geekbench 3 session and got 5322 in multicore. Simply the best S6 kernel ever, is it possible to donate a beer or two?

I tried on 920F , didnt get any MP3 audio playback after, probobly more things not working as well. Wait for next release of XtreStoLite before trying. I restored backup to 2.4 /Cazrack.

Thank you Arter97! Amazing work on Kernel version 3.1, My Crazy settings below updated. My personal responsiveness and performance settings adjustment for this kernel. Updated to 3.0 with new findings but do not use if battery life is very important, never been happier with my phone, these...

Compared to version 1 of this kernel version 2 causes alot more freeze wait time before phone is responsive after waking up phone from deepsleep by turning screen.

Yes xtrolite since it's heavily debloated and less usage ram than most other Roms. Like Arter says s6 TouchWiz is a disaster ram memory usage wise.

YES! Definitely worse battery life. I am not concerned about battery life, if you are I recommend stock Interactive governor on both A57 and A53 but if you still want to test it with as good battery life as possible you should try as low maximum MHz speed on A57 and A53 you find acceptable, if...

My personal responsiveness and performance settings adjustment for this kernel. Updated to 2.0 with new findings but do not use if battery life is very important. 1. Install Kernel Adiutor 2. Set performance governor on Little A53 cluster 3. Restrict Little A53 cluster to max 1200 mhz 3. Set...

Anyone figured out how to get Synapse working?, using 920f

How can we get started with the interface app? Thanks

Sorry not researching this myself but is it possible to change these values with a text editor or with third party tuning application? Thx

This kernel is amazing, try this 1. Install Kernel Adiutor 2. Restrict Little A53 cluster to max 500 mhz 3. Set performance governor on Big A57 cluster 4. Now restrict big A57 cluster to max 1500 Mhz You will find it very smooth even on locked 1500 Mhz but try different max speeds for...

Is it possible to change voltage settings on CPU Mhz somehow?

Congratulations, I've tried all S6 kernels available and this is without doubt the smoothest and fastet of them all, it makes Galaxy S6 920F feel like I expected it to when I purchased my phone. Do you take donations? EDIT: I run Big cluster A57 with performance governor since I can't handle...

Uninstalled Geekbench 3, reinstalled it, fixed it. I noticed in you're screenshot that it says: AArch64 I didn't have such a line of text at all when I got my poor score results which leed me to belive that geekbench 3 was running old school Android 32 bit instead of 64 bit. Works good now...

intresting, kernel?

Hi When I purchased my S6 it was on 5.0.2 and I got a geekbench 3 score above 1450 in single core and above 5000 in multiple core, multiple review sites did as well. However now on 5.1.1 I never get that score any more and the scores on geekbench 3 website for S6 have been dropping, check this...

Well if ever cyanogenmod comes to S6 it's bye bye TouchWiz, I'm pretty happy with phone now except this RAM issue, using unikernel and performance governor on both a53 and A57. However I am so tired of this Samsung software that always is supposed to be fixed and never is. Gonna check out...

Have you tried searching for a Galaxy s6 efs repair script?

When I accidentally destroyed my EFS data on my Note 3 I used a script found here on XDA to repair it and worked. A friend of mine repaired his Note 4 as well. Flashed it from cwm/twrp. I don't know if it will help you. EDIT : Google this efs fix galaxy s6 EDIT2 : I tried flashing every...

settings applications application manager running check System RAM usage

http://www.sammobile.com/2015/07/27/samsung-galaxy-s6-gets-its-first-post-android-5-1-1-update/ according to the comments in that article there seem to be some improvement in RAM memory usage after that patch.

Seriously, you for real? youre statement is simply not true at all.

Try this? Boot into stock recovery and factory reset / data wipe. On computer at www.sammobile.com download the correct stock rom for youre phone and flash it from Odin.

After a S2, Note 2, Note 3 and now a Galaxy S6 I didnt expect this. My S6 after boot use more than 1.2 GB of System RAM which is simply insane compared to my Note 3 on stock Samsung lollipop or any other Android phone. My applications get booted out of RAM all the time, Is this a problem with...

I'll Google it then, probably faster then writing a hotpluging governor to test it out. Regarding running phone with performance governor for maximum speed and smoothness, all I can say it works very good for me and compared to do it on my Note 3 it works much better here with battery life and...

Does this Kernel support a maximum offscreen MHz speed on both A53 cluster and A57 cluster? Thanks

Hi very interesting information, do you have any more information describing this letting A57 cores idle is more power efficient than hotpluging them off and on, or some source link confirming it? Thank you for your kernel, with performance governor on big A57 cluster my phone is as fast as...