Search results

So... I came via a search engine and just got Oops! We ran into some problems. Are all old links now dead? If so, that's going to suck some really big balls. Or will old links be redirected once migration is sorted? For now I think I'm stuffed. I can't figure out where anything is now, and I'm...

See this post: https://forum.xda-developers.com/mi-a1/development/rom-evolution-x-3-3-t4010873/post82643039#post82643039 I'm using the one that person mentioned too. Seems to work, though I only use it for the 2nd back camera when I need to be zoomed in a bit.

OK, if I don't care about any data on the phone, and don't care about the "orange state" warning/delay... Is the TWRP recovery image the only thing I need to flash to get TWRP working on this model? The image I already tried just rebooted, then made the phone bootloop. Reflashing the stock...

I'm looking for a music player app that will successfully restart playback from (approximately) the position where it was when I switch off the car. In the past, on my old Android 2.1 unit, I used Music Folder Player, and it did pretty good. But on the SWM8802 I'm fiddling with, it only seems...

99% of my driving, I know where I'm going and I only need music and GPS speed info displayed on my head unit. On longer trips, even if I know where I'm going, I'll use Google Maps to help me keep track of how the journey is progressing, but I don't really need the entire full screen map. What...

I hope this isn't a stupid question.... As far as I can see, when using the Maps widget (with API key), there's no quick and easy method of setting a one-off destination. It appears the only way to make it happen is to add a new favorite destination (or edit an old one). Could I suggest a...

Yep. That worked. I was just an idiot. Is anyone able to confirm whether there's a balance/fade control on these? Do they even have a 4channel amp or just stereo with the front and rear in parallel?

I got one of these this week and installed it today.... Just a few questions existing users might have some ideas about... 1) I can't see any front/rear "fade", left/right balance or EQ of any sort (not even a 3 band high/mid/low). Is this a hardware limitation or am I missing a setting/app...

Further information... Looks like the sounds app is trying to read something it hasn't got permission for. The crash logs from trying in Textra and QKSMS are here: https://del.dog/alajuphilo.txt https://del.dog/otapickape.txt UID 10159 is the Sounds app, and from what I understand, the...

Same here with Textra, ChompSMS, QKSMS.... I can set a default notification sound in settings to whatever I want, but when I try to set a specific one for text messages, the app crashes. Textra can select any of the built in system sounds, but not a custom one. The others don't even get that far.

Just a quick (stupid) one - As long as I stay on the same major version (pie), I can safely reflash the Xiaomi stock ROM in the normal bootloader mode, right? Problems only come up if you try to go backwards?

I'm running RR 7.0.0 (January 18), and everything has been working great. At some point in last week, my camera has stopped working in all apps. I have Magisk installed already. I did install an updated Magisk a few weeks ago, but I'm fairly sure the camera has been working since. Any ideas? Is...

I downloaded the latest OFFICIAL ROM when it was already bootlooping.... Seriously? I'm supposed to go searching online for 3rd party information rather than the official? Now how about people with useful information instead of arrogance?

I updated to Pie today using OTA. This resulted in a bootloop. Since my bootloader was already unlocked, I booted TWRP (not flashed) and swapped slots. This resulted in booting to the recovery "no command" prompt instead. So I downloaded the only ROM Xiaomi has on their site - 8.1 - and flashed...

Well when fastbook oem unlock told me it wasn't allowed to, I just assumed.... I guess if that's the case, my phone might be buggered.

Just trying this because I have zero Windows machines available and my MiA1 (which doesn't have an EDL image available) is stuck bootlooping and needs the bootloader unlocked to use the official firmware! Anyway - doesn't work: [14:37:28][INFO ] Starting login procedure [14:37:31][INFO ] Login...

I got the update prompt a few days ago. Did it today.... Bootloop :( Lucky I ran a backup of everything I care about, so I'm not too worried. Just means I have to spend today fixing it.

Anyone find a solution to this that doesn't involve rolling back updates? Is it caused by root, or are non-root users getting it too?

An easier alternative, if you have the means to do it, is to use a clean spare phone/tablet for Pokemon Go, and keep your phone how you need/want it for everything else. Bluetooth data sharing is enough bandwidth to make PoGo work.

Some bastard dodgy javascript is replacing the entire page, every page, with a bloody embedded image ad. It's just taken me about 5 attempts to log in and reload this page to post this. At the top of the page body is a dodgy looking "eval" script. It decodes to an equally dodgy looking...

Seems to have fixed it (saved wifi networks showing when out of range) for me.... Now the next question... is this an issue just in this ROM, or do all 3rd party ROMs?

Just installed this on my old Android 2.x headunit... Seems to work really nice but..... It tries to resume music playback before the SD card is "ready", and simply tells me the playlist is empty. Any chance of trying several times over say 60 seconds before throwing that message? My unit...

Anyone else noticed saved WiFi networks showing a signal when they are well out of range? Like, I have home and work saved. Work is 5km from home. But sitting at home, I'm seeing a "half" signal icon... I ran Wigle (wifi scanner) while riding my bike the other day too... It showed signal levels...

Goodix sensor. To clarify and simply it for others (because I had to guess a few things): Step 8 means a default TWRP wipe... Don't need to wipe storage or system. Step 9, 10 and 11 appear unnecessary. I didn't do anything beyond the wipe after setting up the password. Nice find though. How...

I do that all the time in MIUI. It's one of the downsides to having capacitive buttons, not traditional switch based buttons. You can still do it on real buttons, but you can feel the lip on the button and avoid it. One method to prevent it is keep your phone up the other way in your pocket. :)...

I'm not 100% sure, but the pattern I've noticed is they seem to stay if I have a lock screen PIN configured, and they disappear if I have no PIN. If you also don't use a PIN or password on your lock screen, you could try enabling it to see if the problem goes away.

If it's got WinCE, this is not the right place - this is for the pure Android units. My only suggestions would be factory reset it, and if that doesn't work, buy a new unit. Your chances of repairing a hardware fault are very slim, and after hours of fixing it, you're still going to be using an...

Yep - worked that out about 2 minutes ago :) And it just finished booting as I type. Edit: Fingerprint reader still don't work on my phone with the default kernel (works with Agni). Might leave that one alone for the moment though.

OK - so I just dirty flashed the latest nightly over a build from roughly 30-35 days ago. Also flashed the latest firmware (before the CM zip). Now I'm getting the Mi logo for about 1/4 of a second then it turns off. I can get into Fastboot, but not recovery. Where did I mess up? I'm about to...

That # means something is running as root. Either disable the built in root access or replace the su with someone elses SU and manager.

Yeah... Nothing in there about fingerprint. I guess I've got an unsupported reader. Oh well...

Just clean flashed the 20160919 nightly... Most stuff seems to work, but "Settings" crashes when I try to open the "Security" section. Other parts of Settings work fine. Is that going to be related to the fingerprint sensor? I'm pretty sure I've got an FPC one (official ROM had "fpc1020.108"...

Ah... Nope. I've never seen it before.... It's downloading now :)

Just wondering if anyone can direct me to a specific grouper ROM (including version) that has a working multiwindow/splitview system built in... Are there any? The ones I thought should have it didn't seem to. I've also tried XMultiWindow once, but it just didn't want to work right.Can't...

I made a Lego dock a few weeks ago too... I got given a Nexus 7 that had a broken USB connector. Lego stand, BluTack to hold some wires, and I could charge reliably for the 3 weeks it took for a replacement USB "board" to arrive.

I think I already tried flashing an old modem... But that could have been right back at the start when I still had Cyanogenmod on... I probably should start taking notes as I do things :p I'll give it one more go some time soon, but I'm pretty sure it's had some sort of hardware failure now. It...

It's an N7105. Was never locked. Never had any problems... And suddenly, after 3 years (possibly to the day) it just rebooted and came up with the message about SIM Network Unlock Code. I found a page that suggested editing some files in /efs to re-enable the menu, and it worked (I got the menu...

Uh, yeah... That's how I ended up here. It says "at least 4.1.1", but then immediately contradicts that by saying to go lower if it doesn't work. And on top of that, we all know they removed it later, so the "at least" is wrong/unclear too. Edit: Nevermind... Looks like I can't flash back to...

Can anyone tell me what version ROMs this works with? I'd rather not read 100 pages to work that out :p I was on CM13 when my previously factory unlocked phone randomly rebooted than asked for an unlock code. I've reflashed to the latest stock ROM, but I think that's too new. I hate the idea of...

No. The WinCE units can't have Android installed. Reasons: It's quite likely the hardware isn't high enough spec (the CPUs are generally slower, and there's less RAM). Hardly anyone would benefit from developing an Android build for such hardware. Building a working Android system, and the...

Have you tried "123456"?

In the 2.3 units, the BT handsfree is basically a standard BT "headset" controller. The mic feeds it's audio input, and the output goes into the amp. All the app does is send commands to the handsfree chip over serial - the BT connection is never touched by any Android software. I assume they...

Get the newer one. The dual core CPU alone is worth paying more for - stops issues like music pausing when another process hogs the CPU. AFAIK, no one has created any newer ROMs for the older model. I was looking into doing one myself late last year, but didn't get anywhere due to lack of time.

I dont think it would work... As far as I can tell, the MCU is what sees the switched wire and sends a command to Android to initiate a shutdown when the switched wire is turned off. Android never sees the actual car power status - it sees constant power and no battery. There's workarounds if...

Wow. Mine's about 18 months old, and has worked flawlessly. I was worried the Aussie summers would kill it, especially when I leave the car parked in the sun at work, but it's coped with it fine. ---------- Post added at 11:43 PM ---------- Previous post was at 11:33 PM ---------- If...

Mine was giving an error a few days ago (DF-SA-01 from memory) when trying to update an app. Started working fine again the next day.

I have a suspicion a bootable 4.x could be relatively easy, but the "glue" that holds these units together might be tricky to get going again. I've been meaning to find some time to investigate a 4.x build, but just can't fit it in.

You could try pressing the reset button if you can find it. Can't remember if you have to hold it in or not (check this thread - it's been discussed). The other possibility is you have a dead unit - but hopefully the reset does it...

Have you tried other players with the same batch of music? Have you tried music from other sources (ie created in different programs)? On the topic of alternative player apps, and in reply to my own question some time ago, "Music Folder Player" works quite well on these units. It remembers the...

Ah yes... I forgot about Ca-Fi. It appears to be not that unlike these Chinese units, but somewhat better polished (both in hardware and software). It also apparently has a "fast boot" option, which keeps it alive for up to 2 days (configurable) from the car's battery... That's certainly a...