Search results

  1. dbrannon79

    Post [DEV][ROM][KK 4.4][Unofficial] OMNIROM BETA

    I've also noticed that cell data has been acting weird. After a bit of use, my data will slow to a crawl then stop all together. Even tho I have full signal, the only way to get it working again is to ether cycle the airplane mode or reboot! Cycling airplane mode only works for a short time...
  2. dbrannon79

    Post [DEV][ROM][KK 4.4][Unofficial] OMNIROM BETA

    This ROM has been great so far, but I've noticed my glide is starting to lag very bad lately! Even tapping the dialer I have to wait for it to come up. Any ideas? Sent from my SGH-I927 using Tapatalk
  3. dbrannon79

    Post [DEV][ROM][KK 4.4][Unofficial] OMNIROM BETA

    I had the same thing with maps, its a bug in the app from Google. I used titanium backup and removed it, downloaded the older version that had the navigate icon in the app drawer, it works fine!!. ---------- Post added at 07:51 PM ---------- Previous post was at 07:46 PM ---------- I know...
  4. dbrannon79

    Post [DEV][ROM][KK 4.4][Unofficial] OMNIROM BETA

    Thanks! when I opened the performance menu I noticed both the min and max speed were set to "0" . I reset the min to 216 and the max to 608 also toggled the apply on boot to on. after closing the menu and re opening it they dont seem to stick! any ideas?
  5. dbrannon79

    Post [ROM/MOD][2.3.5]*INC3PTION*Back-In-Black{The Collective}v2.0 {I927}[5/20/12]

    ok finally got it installed, checking it out and running some tests, do you happen to have the other version that's not black in black? Thanks
  6. dbrannon79

    Post [ROM/MOD][2.3.5]*INC3PTION*Back-In-Black{The Collective}v2.0 {I927}[5/20/12]

    Thanks! Sorry I haven't done any development in a while, since moving to our new home, family and job position change, I haven't had much time to do anything. But I am glad to see that this device is still alive in development!!
  7. dbrannon79

    Post [ROM/MOD][2.3.5]*INC3PTION*Back-In-Black{The Collective}v2.0 {I927}[5/20/12]

    Thanks, I attempted to flash but I think I will have to edit the zip! Im using TWRP for the recovery and this was made for CWM recovery! ether that or Im gonna have to go back to the old recovery!! Thanks for the upload! :good:
  8. dbrannon79

    Post [ROM/MOD][2.3.5]*INC3PTION*Back-In-Black{The Collective}v2.0 {I927}[5/20/12]

    that works for me! I am doing some tests on the glide, the battery life has gone with all the updates and new roms over the years. I;m wanting to go back to this and see how she reacts. as long as all the apps update to my liking ! :D
  9. dbrannon79

    Post [ROM/MOD][2.3.5]*INC3PTION*Back-In-Black{The Collective}v2.0 {I927}[5/20/12]

    I really hate to resurrect an old thread, but I was hoping the someone might still have a copy of this rom! Thanks in advance!
  10. dbrannon79

    Post [DEV][ROM][KK 4.4][Unofficial] OMNIROM BETA

    so far in testing this rom everything looks and runs great! my only question is how can I govern the cpu speed down? it's draining the battery too fast. I cant seem to find any settings for it. tried using system tuner but that app doesn't seem to work. I will set it down to 600mhz max and it...
  11. dbrannon79

    Post [boot animation] [mod] gsii/iii turn on/shutdown animations FOR STOCK ICS

    Hey Aquethys, how have things been? I've been out for a while. do you by chance still have a good link to this boot animation?
  12. dbrannon79

    Post [ROM][4.0.4[UNOFFICIAL CM9 for the I927-Alpha build-2[9-27-12]

    I would second that Sent from my SGH-I927 using Tapatalk 4
  13. dbrannon79

    Post [ROM] [ICS] LiteROM 0.9.0 - Slim - Smooth - Stable

    I haven't had any other trouble but did find an app that made the ringtones work. And I have to say.. The Rodgers modem works best! I live in an area that before I couldn't get signal until I went into town. After installing the Rodgers modem I can get one to too bars instead if the no service...
  14. dbrannon79

    Post [ROM] [ICS] LiteROM 0.9.0 - Slim - Smooth - Stable

    Just got a chance to check out your ROM. So far it's great! The only issue I have found is trying to set ringtones! I can choose them, but when tapping the ok button it won't accept the changes! Any ideas? Sent from my SGH-I927 using Tapatalk 4
  15. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    Flash covenant kernel just after flashing the rom if needed. The kernel should be already included in the rom Sent from my SGH-I927 using Tapatalk 2
  16. dbrannon79

    Post [DEV][GUIDE] Compile CM10 from source for i927

    No I haven't seen that yet, but what I did, each time I got an error like that it would try googling the error command without the path to your home dir in it. Most of the time it would bring up where others had it and what they did to fix. I haven't tried to build a 4.2 rom yet. PA should be...
  17. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    Try this... install bt mono from the market. Then install a music app like Pandora and see if you can play music through the Bluetooth device! Bt mono has to be on tho! Sent from my SGH-I927 using Tapatalk 2
  18. dbrannon79

    Post [DEV][GUIDE] Compile CM10 from source for i927

    Someone may have forked the repo and updated it! As I found with PA. Thanks to Utacka, he had a stable forked repo that still had everything needed to build with. And I took the official PA repo and used some of his repo to get PA 2.99 working! Maybe you might be able to do the same. :D Sent...
  19. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    I will be fixing the torch this weekend! But you can download flashlight + led app! Sent from my SGH-I927 using Tapatalk 2
  20. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    V3 of course! Sent from my SGH-I927 using Tapatalk 2
  21. dbrannon79

    Post [Q] Baseband loss when when flashing any rom

    Update to UCLJ3 baseband and make sure your following ALL the instructions for that Rom! Some will have you flash a kernel after the Rom is flashed! Sent from my SGH-I927 using Tapatalk 2
  22. dbrannon79

    Post [Q] No service after flashing any developed JBs

    All JB roms require you to update your baseband to the latest att ota regardless of your carrier. ULCJ3! There is a guide in the dev section I posted to get you there. Once your updated and have cwmr recovery back on the device, then and only then your service will work as long as you follow...
  23. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    I can officially confirm Bluetooth works flawlessly on PA 2.56! Sent from my SGH-I927 using Tapatalk 2
  24. dbrannon79

    Post Cases

    For those of us who don't use the physical keyboard, I may have found a otter box style case that looks to fit the glide! It's from the HTC inspire! The phone body is very close to the same size and the buttons are positioned almost the same. Think with some slight modifications it may work...
  25. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    Did you flash Dman's Covenant kernel? and which version of PA are you on? Thanks
  26. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    is this on 2.99 or 2.56? the voice is a known cm10 issue, and I havnt noticed any deep sleep issues with 2.56.
  27. dbrannon79

    Post [DEV][GUIDE] Compile CM10 from source for i927

    It's in "The-Covenant" github
  28. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    Thanks, don't know bout the whatsapp! Can't guarantee market apps working! Sent from my SGH-I927 using Tapatalk 2
  29. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    So it booted! Cool. :p Did you have to flash covenant kernel? If not wifi might with that! Sent from my SGH-I927 using Tapatalk 2
  30. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    must have been a bad flash! I had no problems on the first try!! :D
  31. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    OK guys, here is the PA 2.99 Beta test! http://www.androidfilehost.com/?fid=9390248398092764576 Let me know how it goes! :D
  32. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    Beta test for PA 2.99!! I am finding out that there may be issues with the bluetooth! will have to test my self! but in a side note!! I have built the first ParanoidAndroid 2.99 for the glide. this is in beta test, so having said this, I am currently uploading the beta now. I will post the...
  33. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    you will have to use odin and flash cwmr recovery, then upgrade to the official ics update. the UCLJ3 baseband. afterwards re-flash recovery with odin then after all that your set to use recovery to flash any custom rom of your choosing!! :D
  34. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    Yes confirmed voice works with Covenant kernel :D Sent from my SGH-I927 using Tapatalk 2
  35. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    not sure, the voice was working in a text message! now I see its not! try flashing Dman's Covenant kernel and see if it works! I was just playing around with the kernels to see how litekernel was working!! :D
  36. dbrannon79

    Post [DEV][GUIDE] Compile CM10 from source for i927

    already have that installed!! here is the terminal output... [email protected]:~$ sudo apt-get install lzop [sudo] password for dbrannon79: Reading package lists... Done Building dependency tree Reading state information... Done lzop is already the newest version. The...
  37. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    op updated with third release! all working other than known cm issues. Enjoy :D
  38. dbrannon79

    Post [GUIDE][AOSPA:v3.+] How to Compile AOSPA from Source : + Support and Maintenance

    here is the logcat for the torch app. is there any way to fix this. maybe a way to remap the toggle to another app! [ 01-06 18:46:17.169 1767: 1767 E/AndroidRuntime ] FATAL EXCEPTION: main java.lang.RuntimeException: Unable to start service [email protected] with null...
  39. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    I think I may have found the problem! it has something to do with the app installer! if the apps are installed from a file manager and not downloaded from the play store, they dont install right! I had tapatalk app stored on my sd card that way I didnt have to download it every time I...
  40. dbrannon79

    Post [DEV][GUIDE] Compile CM10 from source for i927

    well I'm running 4g ram and a 8g swap!! I was thinking that was the prob. I had this happen after I used ccache setting that dman gave us to save time on the build. if I'm running other things on my pc like firefox it does this. if I leave it alone while it builds it will finish! maybe if I...
  41. dbrannon79

    Post [DEV][GUIDE] Compile CM10 from source for i927

    any ideas here ! after I got everything cleared and updated sourcees, I'm getting this... make: *** [/home/dbrannon79/android-source/utacka/out/target/product/i927/obj/SHARED_LIBRARIES/libwebcore_intermediates/LINKED/libwebcore.so] Killed make: *** Waiting for unfinished jobs.... make: ***...
  42. dbrannon79

    Post [GUIDE][AOSPA:v3.+] How to Compile AOSPA from Source : + Support and Maintenance

    hey guys, Is ther any way I can fix the torch app and the torch goggle in Utacka's repo build? it keeps crashing and wont turn on the camera led! if I download Flashlight + Led from the market it works! Thanks
  43. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    ya it is late for me too! I dont think the backlight fix has anything to do with the notifications, but I'm grasping at straws here ! I just happen to have a backup of the device tree source from the covenant that I used for the first build. I opened it up and saw where I followed the guide...
  44. dbrannon79

    Post [DEV][GUIDE] Compile CM10 from source for i927

    After using this command repo sync -f I get this message ! remote: aborting due to possible repository corruption on the remote side.2.40 MiB | 409 KiB/s fatal: early EOF fatal: index-pack failed remote: Counting objects: 20814, done. remote: Compressing objects: 100% (6064/6064), done...
  45. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    ya that's a known bug in cm10! just rebuilt PA again with some new updates from git and still no notifications!! Im gonna try backing up to before the backlight fix and see what happens! I have a hunch that something broke the notifications!! Ill post my results soon.
  46. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    putting together a new build tonight! this should fix the arrow keys and hoping that the notifications work this time! :D
  47. dbrannon79

    Post [ROM] [JB4.1.2] Paranoid Android 2.+ built from source

    ok then, I'd say it's a jb issue! something we'll have to live with for a while!!
  48. dbrannon79

    Post [ROM][JB 4.1.2][P?+Aokp+Cm] P.A.C All in 1 ROM !!!!!! Jellybean v18.2 {12-17-12}

    no I wouldn't say that! I switch back and fourth. Id say that Dman has gratefully opened the doors for us to have the ability to make your own builds with what he and thegreatergood gave provided! giving all of us a learning curve! :D Sent from my SGH-I927 using xda premium