[Kernel] Clemsyn-Blades-CPAjuste-supercurio OC kernel for 3.2 elite ver 22

Version 22 is up
Here are the changes

1. Utilizing TCP congestion Veno in IPv4
2. Added handler for kernel command functionality
3. Added ioctl to set/get clk rate
4. reduce HDCP re-negotiation delay
5. fix hdcp hotplug issue
6. disable windows in dc disable
7. Avoid timer calibration on slave cpu
8. cross check connection state on receiving interrupt

Here is the link

Version A

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver22a.zip

If you like our work, please donate

-----------------------------------------------



Version 21 is up

1. Added "conservative" governor when screen is off for better mp3 playback
2. Enabled JRCU_lazy for less memory barriers in kernel

Here are the link

A version (with voodoo sound module included in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver21a.zip

B version (no voodoo sound module included in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver21b.zip

LMK how it goes.

BTW, PLEASE donate, donations are greatly appreciated so please do not hesitate Thanks

_______________________________________________________________________

Version 20 is up

20a

1. Voodoo sound included in the kernel
2. Fixed usb lag
3. Disabled JRCU_lazy

Here is the link.

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver20a.zip

20b

1. No voodoo sound in the kernel
2. Fixed usb lag
3. Enabled JRCU_lazy

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver20b.zip

LMK how it goes.

Please dont hesitate to donate, it is greatly appreciated. Thanks

----------------------------------------------------------------------

Version 19 is up

Here is the link

Version a (voodoo sound in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver19a.zip

Version b (no voodoo sound in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver19b.zip

Lmk of any reboots. Thanks.

-----------------------------------------------------------------------

Version 18 is up

1. Fixed typo in JRCU implementation
2. Disabled watchdog timer
3. fixed a few unbalanced IRQ for better resume
4. Updated emc clk for multiple dcs
5. usb : ECHI : synchonize shutdown and resume
6. Fixed wrong handling of dc enable
7. Fixed wrong aspect ratio information
8. Add underscan capability exposure via sys

BTW, Big thanks to all who donated and for the hdmi cable that I am able lto test my kernels now with hdmi

Here are the link

18a (with voodoo module in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver18a.zip

18b (no voodoo module in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver18b.zip

Please donate Thanks

LMK how it goes.

Update: Files were swapped by mistake..it's now fixed

-------------------------------------------------------------------------
Versino 17 is up

1. Implemented clean code of JRCU (Simpler RCU implementation for SMP systems)
2. Forced USB charging
3. Echi, changes

17a

Note: This kernel has voodoo included in the kernel so please delete your voodoo module if you have one.

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver17a.zip

17b (no voodoo in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver17b.zip

BTW, if you like our work, please dont hesistate to click on our donations button. Thanks

LMK of any issues. Thanks.

-----------------------------------------------------------------------------------

Versino 16 is up

1. Hdmi, echi and spi changes as per nvidia's
2. i2c recovery implemented instead of simple reset

16a (With voodoo sound built-in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver16a.zip

16b (No voodoo sound in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver16b.zip

BTW, if you like our work, please don't hesitate to click on donations button It will be greatly appreciated. Thanks.

-------------------------------------------------------------------



Version 15

1. Fixed the "waking up interminently bug"

Please let me know how it goes

15a (HD and Clemsyn Combo)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver15a.zip

15b (Revolver and Prime)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver15b.zip

PLEASE CLEAR YOUR DALVIK-CACHE AFTER FLASHING THIS KERNEL. THANKS

Please do not forget at your donations are greatly appreciated so don't hesitate to click on our Donate button

-------------------------------------------------------------------------------------------

Version 14 is up

1. Updated hdmi per nvidia's
2. Changed timings in kernel to use Jew's memory timings and lowmemory values (no need for init.d script)
3. Enabled adb debugging as per request
4. Increased 2d/3d timings to 425 (missed to increase it when I changed base)

Here is the link

14a (For HD ROM and Clemsyn Combo)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver14a.zip

14b (for Prime and Revolver)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver14b.zip

If you like our work, pls click on our donations button...It will be greatly appreciated. Thanks.

---------------------------------------------------------------------------------





Version 13 is up

1. Based on 8.6.6.9 kernel
2. Increased voltage on 1544 frequency
3. Added VR scheduler per mike1986 request
4. No voodoo sound at the moment

WARNING: The voltages are up so please Undervolt according using PimpMyCpu

BTW, please click on our donations button if you like our work. THANKS

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver13b.zip

-------------------------------------------------------------

Version 12 is up with the following changes.

1. Lowered bus speeds in high frequencies to >1000
2. Lowered multiplier to reach the appropriate frequency for the new bus speed
3. Used 1646 instead of 1656 frequency.

With voodoo sound in kernel:
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver12a.zip

For prime and revolver (no voodoosound in kernel)
www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver12b.zip

BTW, dont hesistate to click on our donation link. It will be greatly appreciated. Thanks.

---------------------------------------------------------------------------------
Verson 11 is up with the following changes

1. Included timings by Blades
2. Version a (voodoo in kernel) Version b (no voodoo in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver11a.zip

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver11b.zip



** If you like our work, pls click on our Donation link under our sig **

------------------------------------------------------------

Voodoo version 10 is up with the following changes

1. i2c arbitration handling of error changed from simple reset to recovery
2. Increased epp and mpe timings as per Blades
3. Voodoo Sound remove from kernel for better compatibility with ROMS

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver10.zip

LMK how it goes and Please click on donation link if you like our work

** Testing Blades latest OC timings at the moment with voltage increases across the board **

---------------------------------------------------------------------------------

Voodoo version 9 is up...

1. Fix hdmi issues

Please report any waking up issues.. Thanks

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver9.zip

** Voodoo sound is built in the kernel so please delete voodoo module for Prime 1.7 and Revolver ****

Version 9b (for Revolver and Prime with no voodoo in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver9b.zip

-------------------------------------------------------------------------


Version 8 kernel is up and only for tegras getting bootloops

PLEASE STAY IN VERSION 7 IF YOU HAVE NO BOOTLOOPS SINCE IT HAS BETTER MEMORY TIMINGS

1. Lessen memory timings for Hynix memory

Version 8a (not for Prime unless you delete the voodoo module)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver8a.zip

Version 8b (for prime)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver8b.zip

Please let me know how it goes

Donations are greatly appreciated so please do no hesistate

-------------------------------------------------------------------------
Kernel version 7 is up
1. USB and HDMI optimizations per nvidia

Version 7a (not for Prime 1.7 unless you delete the voodoo sound module)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver7a.zip

Version 7b for Prime 1.7 (no voodoo sound in kernel)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver7b.zip

Again, donations are welcome and greatly appreciated

--------------------------------------------------------------------------------------


Kernel for 3.2 Honeycomb version 6 is up

1. Trackpad functional (thanks asus)
2. Less stutter in portrait mode (subjective though, so need your feedback on this)

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver6.zip

Btw, Donations are welcome and greatly appreciated

-------------------------------------------------------------------------

Kernel 3.2 HC ver 5 is up

1. Updated per nvidia and fixed an issue with nvidia's changes not compiling
2. Please see my github for changes

TO BE ABLE TO USE WITH PRIME 1.7 PLEASE DO THE FOLLOWING BEFORE INSTALLING KERNEL

1. Delete voodoo-sound.ko in /system/lib/modules by using file xpert or root explorer
2. Turn off and install kernel

BTW, if you like our work please click on donations button under our sig, it will be greatly appreciated. Thanks.

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver5.zip

--------------------------------------------------------------------------------------------------------------------

-----------------------------------------------------------------------------------------------------------------------------------
Kernel 3.2 HC ver 4 is up - Not compatible with Prime 1.7 or Revolver 2.0 (only for Stock Rooted Rom and Clemsyn ROM combo)

1. Reverted Memory speed changes
2. disabled mmap on framework
3. nvmap : fix GART pinlockups
4. nvmap: single page allocation policy corrected

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver4.zip




Kernel 3.2 HC ver 3 is up - not for Prime 1.7 beta or Revolver 2.0 (only for Stock Rooted 3.2 ROM and clemsynROM)

1. EMC changes
2. Memory speed changes

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver3.zip

BTW, donations are greatly appreciated

-----------------------------------------------------------------------------------

Kernel 3.2HC ver 2 is up - not for Prime 1.7 beta (use version 1 for Prime 1.7)

1. Ext4 on system/data/cache data changed to writeback mode

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver2.zip

Semi-Elite version (not tested because wife took my transformer to work, so need feedback on this)

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2semi-elitever2.zip

----------------------------------------------------------------------------------------

Kernel for 3.2 HC is up


1. Same OC as version 18
2. Horizotal scrolling smooth even upside down but ufortuately vertical still stutters

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades3.2OCver1.zip
-----------------------------

Version 18

Here are the changes

1. Max overclock set at 1.640 as per blades
2. avp/vde/bsea/bsev/sclk/hclk overclocked to 300
3. Read_ahead set at 1024 in kernel so if you are in stock rom, this will set at 1024.
4. slight changes in interactive governor
5. GPU 3d/2d overclocked at 425
WARNING: Not all transformer can take these timings(only elite tegras) so please backup, flash with caution and make sure you are familiar with nvflash

LINK:

www.tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurio-Cpajustes1.6ver18gpu.zip
-------------------------------------------------------------------

BTW, if you like our work, pls click on the donations button under our sig. Thanks


Version 17

1. Tweaked voltages and increased max to 1.646
2. Increased voltages (please undervolt via PimpmyCPU)
3. A few avp changes and usb changes per nvidia

Here is the link

www.tunerspotter.com/clemsyn/Clemsyn-Blades1.6version17.zip

If you like our work, pls click on donations button under our signature. THANKS!
**********
Version 16 1.6ghz
**********

1. Minor changes in voltages

Here is the link

http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel16.zip

***********************************************
1.7 ghz!!!!!!!! ONLY FOR THE SUPER ELITE TEGRAS
***********************************************

1. Maxed cpu and core voltages as per nvidia's

Here is the link

http://tunerspotter.com/clemsyn/Clemsyn-Blades1.7rel15.zip

Please be advised that this is the max I would go...no more.

BTW, if you like our work, pls click on the donation button. Thanks.

I'll be going on vacation so no updates for awhile

----------------------------------------------------------------------------------------------

Version 15 is up

1. Reverted back to Blades original voltates
2. Increased voltage for 1.6ghz for better stability.
3. Changed clock rate limit for 3d
4. Bootup speed reverted back to 1ghz

Here is the link


http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel15.zip

If you like our work, please click on our donate buttons

-------------------------------------------------------------------------

1. NTFS Fully functional !!!!
2. Few changes in kernel
3. Added few erratas for stability
4. PS3 controller functional
5. Undervolting via PimpmyCPU or Setcpu
Here is the link

http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel13.zip

Also available now at KERNEL MANAGER

If you like our work, please click the donations button under our username Thanks

-----------------------------------------------------------------------------


Release 12 - built from source with OC code and undervolting and voodoo sound

1. Built from source (Thanks Asus)
2. Undervolting via Pimpmycpu by Cpajuste's code
3. Overclocking via Blades
4. Voodoo sound by Supercurio
5. oVERCLOCKS AUTOMATICALLY TO 1.4GHZ, NO NEED FOR CPUMASTER OR SETCPU
6. NTFS not yet working

LINK

]
http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6rel12.zip

IF you like our work, pls click on our DONATION button under our username. THANKS.

----------------------------------------------------------------------------------

6/22/11 - Version 11b

1. Fixed Elpida memory scaling

http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6ver11b.zip

BTW, if you like our work, pls click on DONATE button under username. THANKS

------------------------------------------------------------------------------------------------


6/21/11 - Version 11

1. Increased pinmux driver strength of csus sensors
2. Added few changes via nvidia (see git)

Here is the link

http://tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurioversion11.zip

6/20/11- version 10b

1. Added voodoo changes by supercurio
2. Added init.d support in the kernel (not sure if this will work but any help from ROM devs to test will be appreciated)
3. Latest OC by Blades

Here is the link

http://tunerspotter.com/clemsyn/Clemsyn-Blades-Supercurio1.6rel10b.zip

BTW, if you like our work, please help me buy some diapers

----------------------------------------------------------------------------------------------------------------


6/20/11

Version 10 release

1. Same as experimental version B but added Blades' latest OC changes

Here is the link

http://tunerspotter.com/clemsyn/Clemsyn-Blades1.6version10release.zip

If you like our work, pls help me buy some diapers (just got the news, wife is pregnant)

------------------------------------------------------------------------------------------

6/18/11

Experimental version 10b...Here are the changes.

1. Reverted memory to 256 (original size) to prevent issues from other apps (I think 512 was a bit of an overkill)
2. Kept increased memory video framebuffers
3. Updated a UART changes in the board.

Here is the link

http://tunerspotter.com/clemsyn/Experimentalversion10b.zip
http://www.megaupload.com/?d=CH5EBQGA

BTW, if you like our work, don't forget our beer

-------------------------------------------------------------------------------------------------------------
6/18/11

Experimental version 10...Here are the changes

1. Enabled NTFS (pls report if it works or not)
2. Increased tegra video memory for better performance (LMK how your experience is)

Here is the link

http://www.megaupload.com/?d=WF1DAKCM

----------------------------------------------------------------------------------

6/18/11 Version 9

1. Disabled Jazelle Erratta and Thumb EE instructions
2. Enable PL310 errata, 752520 errata and 751472 errata

Here is the link

http://www.megaupload.com/?d=M1H9IZEM

IF you like our work, pls buy us a beer

--------------------------------------------------------------------------------------

6/17/11 Version 8b

Changes:

1. Pinmux changes
2. Updated BT drivers for kernel (hopefully fixes playstation controllers but I dont have any BT device at the moment)
3. 3d/2d GPU overclocked at 350000 to help with artifacts on elite version (had 400000 for 3d and 350000 for 2d)

Here is the link

http://www.megaupload.com/?d=QPRBIEA8


6/16/11 Version 8a Elite

1. fix on backlight (pls let me know how it works for you)

http://www.megaupload.com/?d=1VKHDT0C


6/15/2001 -- INTRODUCING MY VERSION 8 ELITE

Changes are as follows:

1. Tweaked memory settings and video drivers to FIX BROWSER CRASH - finally
2. Added bsea clk rate to the kernel

Here is the link

http://www.megaupload.com/?d=WE5GC5HC

IF you like our work, pls buy us a beer (still waiting my first beer)

--------------------------------------------------------------------------------------------------

6/14/2011

Version 7a ELITE

1. enabled config erratas for cortex 9 cpus
2. enabled nvmap carveout killer to help with browser crashing (still dont solve it though).
3. crypto AES updated to support dual cores

Here is the link.

http://www.megaupload.com/?d=SP6U6XAU

UPDATE: FOR BROWSER CRASH SET ENABLE PLUG-INS to ON DEMAND (browser setting--Advance)

6/13/11 Version 7 Released

Changes:

1. Moved ALSA to spdif (hopefully will fix audio in hdmi)
2. Added DSI support in video drivers
3. few optimizations in cache handling of memory added

Here is the link

http://www.megaupload.com/?d=PQV15NWC

6/13/11

Elite version of Ver 6 with a few changes:

1. Used 4.4.3 compiler
2. Updated serial drivers
3. Updated video drivers in the kernel

Here is the link

http://www.megaupload.com/?d=SEL0MQ3L

6/12/11

Updated version 6 with Accelorometer fix and overlay fixes in video drives
Here is the link

http://www.megaupload.com/?d=QZCNRAWO


--------------------------------------------------------------------------------------

6/12/11

Version 6 is updated with following changes

1. Fixed camera issues
2. Added a few fixes in dma and gpios
3. reverted DAS driver back to original
4. fixed a few video drivers

Here is the link

http://www.megaupload.com/?d=8IQZQSLV

Original kernel Asus kernel

http://www.megaupload.com/?d=GSIHUPJ6

BTW, If you like our work, pls buy us a beer

--------------------------------------------------------------------------------

6/10/11

UPDATE

Release 5a: Here is the link

http://www.megaupload.com/?d=GLDLWF2N

Changes:

1. SMP fixes

Update 6/8/11 --- RELEASE 5 ---------------------

New changes to kernel:

1. CPU OC'd still at 1.6ghz
2. 3dGPU, 2d GPU, vde kept at stock
3. Upgraded Audio driver to DAS
4. GPIO fixes in kernel included

Please let me know if it fixes audio issues. Thanks.

http://www.megaupload.com/?d=LHGNQXTO

BTW, if you like our work, please buy us a beer

-----------------------------------------------------

Update 6/6/11 release 4

Elite tegra version since not all tegra can run this kernel. The reasons are as follows:

CPU OC'd at 1600 (1000 default)
3d GPU OC'd at 400000 (300000 default)
2d GPU OC'd at 375000 (300000 default)
VDE OC'd at 300000 (250000 default)

Again, only for the elite tegras out there. Here is the link

http://www.megaupload.com/?d=JMVUMP0A

Please create a backup, then install kernel, then clear Dalvik-cache, the Wipe Cache partition. Goodluck.

BTW, if you like our work, please buy us a beer or two

Will create a normal version soon. Also this kernel is updated to nvidia 10.11.6 standards (except for wifi and usb at the moment)

Update 6/5/11 Release 3

http://www.megaupload.com/?d=2ZJI1J2H

Reverted to 4.4.0, CIFS built-in the kernel, updated to 1.5 ghz for better stability (I think)

Update 6/5/11 Initial Release 2

Fixed Camera/Sound/Flash etc, next up would be voltages for OC. Used 4.4.3 toolchain for better compatibility.

Source is up on my github (I apologize, its kinda messy but needed to release our kernel)

Here is the link

http://www.megaupload.com/?d=MNJF34WJ

BTW, please use CPUMaster to Overclock (or SetCPU should be OK but haven't test it)

And if you like my work, please buy me a beer Also you input is greatly appreciated

GITHUB

https://github.com/clemsyn/LatestAsusOC

GibMcFragger said:

Sweet. Downloading! I'll try it after I finish watching movie!

Sent from my Rooted Transformer running Primordial v3.1

Click to expand...

Click to collapse

Ooopps, just found out, no audio. Will fix this tomorrow but you can test it out.

Mean Sixteen said:

Downloaded but the file has no extension.

Should I rename it to a zip file?

Then of course flash through cwm?

Sent from my Transformer TF101 using XDA Premium App

Click to expand...

Click to collapse

Must have uploaded the wrong file...Sorry, will upload again. But yes, you can just add .zip and that should be fine.

OnceHeaven said:

working fine for fine. OC all the way to 1.6. No problem with audio too (Equal sound on both speakers). wonder if its a placebo effect but speakers sounds slightly louder. Great work.

Click to expand...

Click to collapse

hmm..I'll try to format everything out. I might get my audio working, how about your camera? Is it working? LMK.

Ok, got my audio working, thanks...saved me some time...really have to go now, Goodnight to everyone.

dirwdirw said:

oh! try it right now!


edit: 1.6G is not stable for me. got a reboot when i am opening wifi

edit: 1.5G no luck either

Click to expand...

Click to collapse

Try 1.4..I got mine stable at that speed.

lithiasalesjs said:

Video playback terrible 720p and no sound on video

Sent from my Transformer TF101 using Tapatalk

Click to expand...

Click to collapse

Will check this out...Thanks.

ivan.volosyuk said:

Clemsyn, nice to see you there. So you trade your Gtablet for Transformer

Sent from my Transformer TF101 using Tapatalk

Click to expand...

Click to collapse

Still have my Gtab that I just bought recently...been trying to get 2.6.36 kernel to boot on that thing but I'm kinda careful because of the bad blocks I made so far. Anyways, got this Transformer and decided to make a few tweaks to get 3.1 OC kernel to boot. As you can see still has some issues Hope asus releases their source ASAP though..