[Q] DRM and unlocking bootloader Mini / Mini Pro

Search This thread

sur1k

Senior Member
Jul 6, 2010
189
88
Yoshkar-Ola
The same problem.

But I have .335 firmware (.330 on 'rooted' screenshots). Is this the case?

The log is attached.
 

Attachments

  • SOC-2.1.1.txt
    1.5 KB · Views: 215
Last edited:

sur1k

Senior Member
Jul 6, 2010
189
88
Yoshkar-Ola
Sudenly I've found an alternative way of unlocking bootloader. It was found on Russian 4pda forum in XPERIA neo section (here's the link if you can understand Russian). I just googled a bit and here we are :)

This method keeps DRM keys (not sure about the warranty, so follow these instructions on your own risk). Credits go to the_laser.

All we need is:
  • find short piece of wire & download s1tool software (attached)
  • Locate test point connector and ground battery connector on your sk17 (look at the picture below - thanks ooxtcoo for the picture)
    sk17.jpg
  • instructions from here (post #4; just mention that sk17 is supported now):
    http://support.setool.net/showthread.php?2...equest-for-help

That's all. Now you can flash your own kernels or do anything you want with unlocked bootloader. If your phone won't boot flash it via FlashTool.

Cheers! :)

P.S. I tried both lock and unlock. Works great.
 

Attachments

  • s1tool.rar
    4.5 MB · Views: 58,877
Last edited:

kessiyean

Senior Member
Apr 8, 2006
131
5
Work this on Xperia Mini ST15i too?
And understand I right that this way only made the phone rooted without any flash of kernel or somesthing else?
 

sur1k

Senior Member
Jul 6, 2010
189
88
Yoshkar-Ola
This only unlocks bootloader. If you want to root your device, you need to flash unsecure kernel / or prerooted firmware then.

Looks like it works on any XPERIA 2011. You just need to locate test point and ground connector.
 
  • Like
Reactions: kessiyean

r33p

Senior Member
Jul 3, 2011
370
104
yeah ok, omnicard capable simreaders.. typically USD 30 and up.
+ some skills.
too much hassle just to keep drm imho.

tips: simunlock for 20$ online -> unlock bootloader -> root -> be happy
 
Last edited:

dejanp1

Senior Member
Apr 25, 2009
182
29
yeah ok, omincard capable readers.. typically USD 30 and up.
+ some skills.
too much hassle just to keep drm imho.

tips: simunlock for 20$ online -> unlock bootloader -> root -> be happy

not only card reader, you must buy setool (price 120 euro with card reader) and must buy setool credits (minimum 30 credits 70euro), but setool unlock(network) all new sonyericsson phones
 
Last edited:

sur1k

Senior Member
Jul 6, 2010
189
88
Yoshkar-Ola
Where did you get info about credits?

S1 tool is a FREE part of SETool. No credits. Just download and follow the instructions. And it's better to reboot the computer after drivers installation.

So:
1. Download & extract
2. Connect test point to the ground and attach USB cable. Wait while Windows find new device, disconnect test point. Windows won't find appropriate drivers. Show him drivers folder from the archive. Agree to install 'untrusted' drivers.
3. Reboot your PC.
4. Run s1, press 'Patch semcboot' and follow tho on-screen instruction.

It works. I tried it ;)
 
Last edited:

dejanp1

Senior Member
Apr 25, 2009
182
29
Where did you get info about credits?

S1 tool FREE part of SETool. No credits. Just download and follow the instructions. And it's better to reboot the computer after drivers installation.

So:
1. Download & extract
2. Connect test point to the ground and attach USB cable. Wait while Windows find new device, disconnect test point. Win won't find appropriate drivers. Show him drivers folder from the archive. Agree to install 'untrusted' drivers.
3. Reboot your laptop.
4. Run s1, press 'Patch semcboot' and follow tho on-screen instruction.

It works. I tried it ;)

I have setool, network unlock is 5 credits...

Sent from my SK17i using Tapatalk
 

nil1511

Member
Oct 3, 2011
18
6
Xiaomi Mi 10T / 10T Pro
@sur1k i tried using s1tool here is the log

10/3/2011 10:23:45 AM DETACH USB CABLE FROM PHONE
10/3/2011 10:23:45 AM REMOVE BATTERY FROM PHONE
10/3/2011 10:23:45 AM ATTACH TESTPOINT
10/3/2011 10:23:45 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
10/3/2011 10:23:45 AM
10/3/2011 10:23:56 AM PROCESSING ...
10/3/2011 10:23:57 AM REMOVE TESTPOINT NOW, THEN PRESS "READY"
10/3/2011 10:23:57 AM
10/3/2011 10:24:03 AM
10/3/2011 10:24:03 AM TO CONNECT NEXT PHONES
10/3/2011 10:24:03 AM X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
10/3/2011 10:24:03 AM LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
10/3/2011 10:24:03 AM PRESS AND HOLD "BACK" BUTTON...
10/3/2011 10:24:03 AM
10/3/2011 10:24:03 AM ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
10/3/2011 10:24:03 AM PRESS AND HOLD "Volume Down" BUTTON...
10/3/2011 10:24:03 AM
10/3/2011 10:24:03 AM PLEASE ATTACH TURNED OFF PHONE NOW
10/3/2011 10:24:03 AM
10/3/2011 10:24:04 AM
10/3/2011 10:24:04 AM RUNNING S1_LOADER VER "R4A062"
10/3/2011 10:24:04 AM LOADER AID: 0001
10/3/2011 10:24:05 AM FLASH ID: "0098/00B3"
10/3/2011 10:24:05 AM LOADER VERSION: "r4A069"
10/3/2011 10:24:05 AM
10/3/2011 10:24:05 AM
10/3/2011 10:24:05 AM SEMC SIMLOCK CERTIFICATE, PROCEEDING
10/3/2011 10:24:05 AM FINISHED
10/3/2011 10:24:05 AM Elapsed:20 secs.

but still bootloader is not unlocked i check by volume down method on booting but it simply start no bootloader coming
 
Last edited:

cccvtt

New member
Aug 18, 2011
2
0
Where did you get info about credits?

S1 tool FREE part of SETool. No credits. Just download and follow the instructions. And it's better to reboot the computer after drivers installation.

So:
1. Download & extract
2. Connect test point to the ground and attach USB cable. Wait while Windows find new device, disconnect test point. Win won't find appropriate drivers. Show him drivers folder from the archive. Agree to install 'untrusted' drivers.
3. Reboot your laptop.
4. Run s1, press 'Patch semcboot' and follow tho on-screen instruction.

It works. I tried it ;)

Is there a way to relock it?
 
@sur1k i tried using s1tool here is the log

10/3/2011 10:23:45 AM DETACH USB CABLE FROM PHONE
10/3/2011 10:23:45 AM REMOVE BATTERY FROM PHONE
10/3/2011 10:23:45 AM ATTACH TESTPOINT
10/3/2011 10:23:45 AM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
10/3/2011 10:23:45 AM
10/3/2011 10:23:56 AM PROCESSING ...
10/3/2011 10:23:57 AM REMOVE TESTPOINT NOW, THEN PRESS "READY"
10/3/2011 10:23:57 AM
10/3/2011 10:24:03 AM
10/3/2011 10:24:03 AM TO CONNECT NEXT PHONES
10/3/2011 10:24:03 AM X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
10/3/2011 10:24:03 AM LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
10/3/2011 10:24:03 AM PRESS AND HOLD "BACK" BUTTON...
10/3/2011 10:24:03 AM
10/3/2011 10:24:03 AM ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
10/3/2011 10:24:03 AM PRESS AND HOLD "Volume Down" BUTTON...
10/3/2011 10:24:03 AM
10/3/2011 10:24:03 AM PLEASE ATTACH TURNED OFF PHONE NOW
10/3/2011 10:24:03 AM
10/3/2011 10:24:04 AM
10/3/2011 10:24:04 AM RUNNING S1_LOADER VER "R4A062"
10/3/2011 10:24:04 AM LOADER AID: 0001
10/3/2011 10:24:05 AM FLASH ID: "0098/00B3"
10/3/2011 10:24:05 AM LOADER VERSION: "r4A069"
10/3/2011 10:24:05 AM
10/3/2011 10:24:05 AM
10/3/2011 10:24:05 AM SEMC SIMLOCK CERTIFICATE, PROCEEDING
10/3/2011 10:24:05 AM FINISHED
10/3/2011 10:24:05 AM Elapsed:20 secs.

but still bootloader is not unlocked i check by volume down method on booting but it simply start no bootloader coming

Fastboot is Volume up and connect usb cable with power off, you should get a blue led.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 20
    Sudenly I've found an alternative way of unlocking bootloader. It was found on Russian 4pda forum in XPERIA neo section (here's the link if you can understand Russian). I just googled a bit and here we are :)

    This method keeps DRM keys (not sure about the warranty, so follow these instructions on your own risk). Credits go to the_laser.

    All we need is:
    • find short piece of wire & download s1tool software (attached)
    • Locate test point connector and ground battery connector on your sk17 (look at the picture below - thanks ooxtcoo for the picture)
      sk17.jpg
    • instructions from here (post #4; just mention that sk17 is supported now):
      http://support.setool.net/showthread.php?2...equest-for-help

    That's all. Now you can flash your own kernels or do anything you want with unlocked bootloader. If your phone won't boot flash it via FlashTool.

    Cheers! :)

    P.S. I tried both lock and unlock. Works great.
    2
    Where did you get info about credits?

    S1 tool is a FREE part of SETool. No credits. Just download and follow the instructions. And it's better to reboot the computer after drivers installation.

    So:
    1. Download & extract
    2. Connect test point to the ground and attach USB cable. Wait while Windows find new device, disconnect test point. Windows won't find appropriate drivers. Show him drivers folder from the archive. Agree to install 'untrusted' drivers.
    3. Reboot your PC.
    4. Run s1, press 'Patch semcboot' and follow tho on-screen instruction.

    It works. I tried it ;)
    1
    Even if we flash it with stock firmware, its not getting back ?

    No it will not come back that way

    Sent from my SK17i using Tapatalk
    1
    Am I the only one with a rooted SK17i with a LOCKED Bootloader in here? o_O

    I can use Root Uninstaller to clean my phone off stock apps, however, when I dial *#*#7378423#*#* I get the message "Bootloader unlock allowed: Yes" which means I have a locked Bootloader. I have never used TrackID though, is there a DRM app I can try other than TrackID to double check I still have the feature?

    Either my phone is a miracle or something has been overlooked, I'll post 2 screen captures to confirm this evening.

    ***EDIT***

    I rooted my phone just out of the box using SuperOneClick and never even downloaded FlashTool (Unless they are the same tool and I'm mistaken) and I never went here ( unlockbootloader.sonyericsson.com/instructions ) to unlock the Bootloader.
    1
    This only unlocks bootloader. If you want to root your device, you need to flash unsecure kernel / or prerooted firmware then.

    Looks like it works on any XPERIA 2011. You just need to locate test point and ground connector.