[KERNEL][ICS/CM9][ExTweaks&Plus] Shun Andromeda 2.2.10 (30/05)

Search This thread
By:
Advanced…
C

crypticc

Senior Member
Aug 22, 2009
1,249
174
London
Well this is interesting. Smoothest by far for me out of speedmod, siyah, and neak. I know by your admission this highly leverages several of them, but I like it. Also back to low battery and wake lock which the others struggled with. (I know I know, wake lock is typically apps, but switching back and forth each night over the last five days confirmed in my mind at least that this kernel has less)

Yours is most sensitive to uv. Freezing abound at even moderate uv for me when all the kernel above were happy.

Thank you

Sent from my GT-I9100 using Tapatalk 2
 
Last edited:
It_ler

It_ler

Recognized Contributor
Aug 23, 2011
12,505
17,303
Samsung Galaxy S8
Samsung Galaxy S10
  • Like
Reactions: bgn9000
M

minidou-77

Senior Member
Aug 6, 2011
1,018
402
It_ler said:
Here are my first impressions of Shun Andromeda 1.8 => http://xdaforums.com/showpost.php?p=27855214&postcount=179

Benchmark and night use battery test results in the OP of my thread => http://xdaforums.com/showthread.php?p=26775950

I got the "slow-motion" bug twice in about 19 hours of running this kernel.
This was my first experience with this issue.
Try to finish my tests, but had to abort the last mixed usage battery test.

Anybody else having the slow-motion bug with this kernel version?
Click to expand...
Click to collapse

To avoid the slow motion bug try an other governor than conservative or ondemand ;-)
 
  • Like
Reactions: It_ler
Jokesy

Jokesy

Senior Member
May 31, 2011
3,382
1,154
Lagos
What other Governor can I use for optimum battery and performace on this kernel because I had about 3 slow motion bugs/freezes during media playback yesterday

---------- Post added at 01:20 PM ---------- Previous post was at 01:10 PM ----------

Another bug.
When I set up WIFI-hotspot, It deactivates itself after some time like say 45 mins.
It has happened about 4 times in 2.5hrs now.
I'm using version 1.8 of this kernel
 
K

kokopopz

Senior Member
Nov 19, 2011
83
21
Flashed v1.8 yesterday. So far so good. No issue found.

Came from Siyah v3.3.2 which crashed once every few days.

Thanks for the great kernel.
 
  • Like
Reactions: bgn9000
K

kokopopz

Senior Member
Nov 19, 2011
83
21
kokopopz said:
Flashed v1.8 yesterday. So far so good. No issue found.

Came from Siyah v3.3.2 which crashed once every few days.

Thanks for the great kernel.
Click to expand...
Click to collapse

Just met the "slow motion" bug. The phone struggled for a about 30 sec and then turned off. Need to long press the power to restart it.

Using the kernel on a rooted stock rom, DULP9.
 
Jokesy

Jokesy

Senior Member
May 31, 2011
3,382
1,154
Lagos
kokopopz said:
Just met the "slow motion" bug. The phone struggled for a about 30 sec and then turned off. Need to long press the power to restart it.

Using the kernel on a rooted stock rom, DULP9.
Click to expand...
Click to collapse

Because of that same bug, I've moved to another kernel. I will probably come back later in future.
Good work dev!
 
G

geroxx

Senior Member
Nov 24, 2011
139
467
kokopopz said:
Just met the "slow motion" bug. The phone struggled for a about 30 sec and then turned off. Need to long press the power to restart it.

Using the kernel on a rooted stock rom, DULP9.
Click to expand...
Click to collapse

sadly i have this bug one time per hour. i hope he can fix it fast because i realy love this kernel!

Sent from my GT-I9100 using xda premium
 
  • Like
Reactions: bgn9000
C

crypticc

Senior Member
Aug 22, 2009
1,249
174
London
How many people with slow crawl to death are using abyssplug with sio? Just a thought, I enabled then immediately got slow death to reboot

Sent from my GT-I9100 using Tapatalk 2
 
bgn9000

bgn9000

Senior Member
Jan 12, 2011
446
732
Versailles
Hi everybody, I am working with my french galaxyS2 dream team on a version 2 with no more slow down issue.
Apologize about this.

Since I gave my GS2 to my wife, I cannot experiment easily my work ;)
 
  • Like
Reactions: minidou-77 and Ku4t0
J

JmPTaz09

Senior Member
Mar 2, 2011
1,526
348
Schaumburg
bgn9000 said:
Hi everybody, I am working with my french galaxyS2 dream team on a version 2 with no more slow down issue.
Apologize about this.

Since I gave my GS2 to my wife, I cannot experiment easily my work ;)
Click to expand...
Click to collapse

What is your current phone? And doesn't your wife like playing with your kernels? :what:

Sent from my SGH-I777 using xda app-developers app
 
bgn9000

bgn9000

Senior Member
Jan 12, 2011
446
732
Versailles
JmPTaz09 said:
What is your current phone? And doesn't your wife like playing with your kernels? :what:

Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse

My current phone is a GS3 ;)
My wife is using my GS2 with my kernel but she wants a stable phone :p

Anyway, here is version 2 ;)
I would like to say many thanks to french friends at GalaxyS2.fr/forum who help me to continue my work on Shun and tested this new version.
However, I cannot say everything is completely sure for all GS2 but you can easily reflash an older version if needed.

EDIT : about the slow down issue, I can suggest to use NOOP instead of SIO because I suspect something wrong from a Siyah Merge made 16th of June.
 
Last edited:
  • Like
Reactions: Reno_kun
You must log in or register to reply here.

Similar threads

LitePro
[ROM][ICS][26/05]★ Liteϟning ROM v3.2 ★[Fast as Lightning]
Replies
19K
Views
6M
I
inkyadrian
dorimanx
  • Locked
  • Poll
[Kernel 3.12.rc6][24 OCT][DEV THREAD!] Dorimanx 8.43 ONLY JB I9100 +RECOVERY+ROOTED.
Replies
26K
Views
6M
Troubadour666
Troubadour666
westcrip
GT-I9100 [Development] Resurrection Remix 4.4.2 KitKat v5.1.5 [2014/06/09]
Replies
81K
Views
17M
R
Rocky138
_Sale_
[ROM][Aug 26][XWMS3] NeatROM/Lite/ExtraLite/Full/Themed/Aroma/Mods
Replies
90K
Views
11M
R
rickmar
raffaele88
  • Poll
[ROM][LPF]FOXHOUND Revolver Ocelot|ICS|OTA|Performance|AROMA|31 May
Replies
18K
Views
3M
C
cyadron

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 48
    bgn9000
    bgn9000
    After Ikki The Phoenix, the adventure is continuing on ICS thanks to XDA and Elite recognized developpers as Gokhanmoral, Entropy512 and others devs (myfluxi, simone201, and many others...).

    NewToolchain 2013.04 (gcc 4.7.3) with -Ofast compiler option : very smooth ;)
    Tweaked conservative settings
    100-1600 Mhz frequencies (but 200-1200 Mhz by default)
    ExTweaks configuration powered (I recommend ExTweaks Plus)
    New CWM 6.0.1.5 from PhilZ (read guide HERE)
    NewMali control module (based on Michael Wodkins's gpu_control implementation) from Siyah

    GIT
    https://github.com/bgn9000

    Boot Logo ;)

    2040
    View
    24
    bgn9000
    bgn9000
    CWM Script to reset profiles (battery, default et performance) : HERE
    Remarks:
    1/ Changing profiles not working into CWM (additional kernel actions) because I never had time to compile my own CWM and change Siyah's code to point to /data/.shun
    2/ This script is moving all profiles into sub directory named "backup".
    Click to expand...
    Click to collapse

    ChangeLogs and zImages (only through CWM)
    RESET PROFIL, use my script in case of issue

    Version 2.2.10 / CWM only ICS 4.0.x
    1/ Linux 3.0.65 to 3.0.80
    2/ Linaro 2013.04
    CWM version : HERE

    Version 2.2.9b / CWM only ICS 4.0.x
    1/ Linux 3.0.63
    2/ Linux 3.0.64
    3/ CM9 init files updated
    4/ Fixed auto rotation
    CWM version : HERE

    Version 2.2.8 / CWM only ICS 4.0.x
    1/ Linux 3.0.61
    2/ Linux 3.0.62
    CWM version : HERE

    Version 2.2.7 / CWM only ICS 4.0.x
    1/ Linux 3.0.59
    2/ Linux 3.0.60
    CWM version : HERE

    Version 2.2.6 / CWM only ICS 4.x
    1/ Linux 3.0.57
    2/ Linux 3.0.58
    3/ Linaro 2012.12 (gcc 4.7.3 prerelease)
    CWM version : HERE

    Version 2.2.5 / CWM only ICS 4.x
    1/ Linux 3.0.54
    2/ Linux 3.0.55
    3/ Linux 3.0.56
    4/ Mali control module from Siyah (thanks to @gokhanmoral)
    CWM version : HERE

    Version 2.2.4 / CWM only ICS 4.x
    1/ New linaro 2012.11 (gcc 4.7.3)
    2/ Linux 3.0.53

    Version 2.2.3b / CWM only ICS 4.x
    1/ Linux 3.0.52
    2/ CWM 6.0.1.5 by PhilZ (Touch 3.0)
    3/ Added SuperSU 0.98
    4/ Fixed .nobootlogo issue

    Version 2.2.2 / CWM only ICS 4.x
    1/ Linux 3.0.50 et 3.0.51
    2/ CWM 6.0.1.4 by @Phil3759

    Version 2.2.1b / CWM only ICS 4.x
    1/ Linaro 2012.10
    2/ Linux 3.0.47
    3/ Linux 3.0.48
    4/ Linux 3.0.49
    5/ MMC_CAP_ERASE review

    Version 2.2.0 / CWM only ICS 4.x and CM10 ROM
    1/ Merge with update7
    2/ Added SuperSU 0.96

    Version 2.1.2 / CWM only ICS 4.x and CM10 ROM
    1/ Linux 3.0.46

    Version 2.1.1 / CWM only ICS 4.x and CM10 ROM
    1/ Linux 3.0.45

    Version 2.1.0 / CWM only ICS 4.x and CM10 ROM
    1/ Linux 3.0.44

    Version 2.0.9F (like final) / CWM only ICS 4.x and CM10 ROM
    1/ Linaro 2012.09
    2/ Added camera fix done by @Tungstwenty

    Version 2.0.9e / CWM only ICS 4.x and CM10 ROM
    1/ Disabled JRCU, back to RCU

    Version 2.0.9d / CWM only ICS 4.x and CM10 ROM
    1/ Phenomal tweaks for memory and LCD voltages (thanks @@fenomeno83)
    2/ Another review of chargecurrent settings

    Version 2.0.9c / CWM only ICS 4.x and CM10 ROM
    1/ JRCU (thanks @Simone)
    2/ New chargecurrent settings (again with 4th settings)

    Version 2.0.9b / CWM only ICS 4.x and CM10 ROM
    1/ Linux 3.0.43
    2/ New chargecurrent settings

    Version 2.0.9 / CWM only ICS 4.x and CM10 ROM
    1/ Another new boot logo :)
    2/ Added bus voltage into sysfs
    3/ Merge with Siyah's initramfs (CM10 video issue ++)
    4/ Added /sdcard/.nobootlogo

    Version 2.0.8c / CWM only ICS 4.x and CM10 ROM
    1/ Linaro 2012.08
    2/ Linux 3.0.39
    3/ Back to Revert max8997: Allow 700 mV on buck3 (too long to exit deep sleep)
    4/ Linux 3.0.40
    5/ Linux 3.0.41 and 3.0.42
    6/ Readded Ondemand governor

    Version 2.0.7e / CWM only ICS 4.0.X ROM
    */ Linaro toolchain 2012.07 (gcc 4.7.2)
    1/ Samsung update 5/6/7 sources
    2/ Linux 3.0.37 and 3.0.38
    3/ bluetooth: support for 4.0.4 stock ROMs
    4/ net: wireless: bcmdhd: update bcmdhd driver to 1.15.15
    5/ CM10 compatibility (thanks @gokhanmoral)
    EDIT : For 4.0.4 ROM users, there is an excellent camera fix done by @Tungstwenty you can install through CWM : HERE

    Version 2.0.6 / CWM only ICS 4.0.X ROM
    1/ wakelock: main_wake_lock fix by tungstwenty
    2/ Added -mfpu=neon to Makefile (thanks @VOKu)
    3/ From NEAK 2.1 : cpufreq: another change to stop Level not found issue (might help slow mo)
    4/ drivers: conservative and abyssplug, sampling rate modification

    Version 2.0.5d / CWM only ICS 4.0.X ROM
    1/ Merge with Siyah 3.3.3c
    2/ mach-exynos: mach-u1: Allow 700mV on buck3 (@thanks dorimanx)
    3/ bcmdhd: Change packet filter settings to block multicast
    4/ Revert: block: sio tweaks
    5/ mali: allow 700 mV as minimum for GPU

    Version 2.0.4 / CWM only ICS 4.0.X ROM
    1/ New bootlogo ("Déchainez votre mobile" thanks @Mr.Mout)
    2/ max8997: Allow 700 mV on buck3
    3/ Revert : max8997: Allow 25 mV steps on buck3
    4/ From myfluxi kernel : mach-exynos: busfreq: Add undervolt option using asv table
    && Add options for up- and down threshold
    5/ Added SU and SuperSU 0.93
    6/ Revert UV -50 mv into default profile
    7/ Lower voltages for 200 MHz

    Version 2.0.3 / CWM only ICS 4.0.X ROM
    1/ Revert : max8997: Allow 700 mV on buck3
    2/ Legacy hotplug is back
    3/ Some debug flags unset
    4/ NOOP is default profile scheduler
    5/ Undervolting -50 mV within default profile

    Version 2.0.2 / CWM only ICS 4.0.X ROM
    1/ Voodoo louder compatibility is back (sorry)
    2/ Some makefile merge from myfluxi kernel (thanks @myfluxi)
    3/ From myfluxi kernel :
    max8997: Allow 700 mV on buck3
    max8997: Allow 25 mV steps on buck3

    Version 2.0.1 / CWM only ICS 4.0.X ROM
    1/ Revert to gcc 4.6.3 (Linaro 2012.03)
    2/ Revert to conservative

    Version 2.0 / CWM only ICS 4.0.X ROM
    1/ Linux 3.0.36
    2/ Linaro 2012.06 (GCC 4.7.1)
    3/ Merge with Siyah 3.3.2
    (extweaks profiles should be reseted during installation but you can use my script to save them before)

    Version 1.8 / CWM only ICS 4.0.X ROM
    1/ Linux 3.0.35
    2/ SuperSU 0.91
    3/ Some reverts from Ikki merge
    4/ arm: remove "optimized" SHA1 routines
    5/ Added Abyssplug with some tweaks from my GS3 testings (credits @angelom)
    6/ net: wireless: bcmdhd: update wifi drivers (from i9300 sources)

    Version 1.7 / CWM only ICS 4.0.X ROM
    1/ Linux 3.0.34
    2/ Linaro 2012.05 (gcc 4.7.1)
    3/ block: sio tweaks
    4/ mmc: n7000 changes without enabling MMC_CAP_ERASE
    5/ Few others fixes

    Version 1.6 / CWM only ICS 4.0.X ROM
    1/ Linux 3.0.33
    2/ mdnie: toggling mdnie negative effect with home button
    3/ Revert bad cherry pick (kernel/sched.c : ONLINE)
    4/ mc1n2: Add GT-N7000 call audio support

    Version 1.5 / CWM only ICS 4.0.X ROM
    1/ Added a way to change logo into CWM
    2/ Merge cpu settings from Ikki (hotplug, deepsleep level, L4=800 MHz freq max enabled, ...)

    Version 1.4 / CWM only ICS 4.0.X ROM
    1/ Staging: android: binder: Fix crashes when sharing a binder file between processes
    2/ From Siyah : sched: fix cpu index check in get_cpu_nr_running function
    3/ mc1n2: Add interface for volume registers (thanks @myfluxi)
    4/ From Siyah : touchscreen: mxt224_u1: use platform data struct directly to set touchscreen threshold values
    5/ ld9040: increase boot gamma level to original GAMMA_160CD level
    6/ max8997: Implement Accessory Charger Adapter support.

    Version 1.3 / CWM only ICS 4.0.X ROM
    1/ modem_if: update modem driver to update5 sources
    2/ mach-exynos: tmu: add tmu sysfs for temperature reading (from update5 sources
    3/ net: wireless: bcmdhd: disable ESCAN_RESULT_PATCH (from Siyah)
    4/ usb: gadget: composite: Fix corruption when changing configuration
    5/ [MMC] Patch the firmware of certain Samsung emmc parts to fix a bug
    6/ Revert "usb: otg: merges with sztupy's usb host mode build 5 changes in his nexus s kernel"

    Version 1.2 / CWM only ICS 4.0.X ROM
    1/From Siyah : cypress: touchkey refactorings, cleanup and guards against voltage&led status modifications when in deep sleep which cause slowness bug
    2/ mDNIe: adjustable color settings (thanks to sakura)
    3/ New boot logo

    Version 1.1 / CWM only ICS 4.0.X ROM
    1/ Linux 3.0.32
    2/ net: wireless: bcmdhd: another major update to broadcom drivers, from SHV-E110S sources.
    3/ Revert "RWSEM_XCHGADD_ALGORITHM for ARM (R/W semaphores implemented using ARM atomic functions) by CodeAurora"
    4/ GPU voltage +50 mV with default profile (use script to reset profile)

    Version 1.0 / CWM only ICS 4.0.X ROM
    1/ bcmdhd : patches from Siyah 3.2.3
    2/ mmc: increase mmc read and write timeout for some crappy cards.
    3/ ld9040: adjust panel gamma order to have more smooth transitions in lower brightness levels
    & panel gamma set changes to have lower brightness for low-light conditions
    4/ from Siyah : cypress: led fadein/fadeout (inspired from myfluxi's repo).
    & cypress: restore led regulator voltage after fading out
    5/ mozilla boot-to-gecko (b2g) support. (thanks to pulser)
    6/ cm9 sdcard mounts

    Early versions...

    Early Version 0.13 / CWM only ICS 4.0.X ROM
    1/ Merge with Siyah 3.2 : BLN enhancements (very good job of @gokhanmoral)
    2/ bcmdhd: new wifi driver bugs fixed from Siyah

    Early Version 0.12 / CWM only ICS 4.0.X ROM
    1/ bcmdhd: new wifi driver
    2/ ld9040: increase number of gamma levels from 21 to 25, as in GB kernel
    3/ From Siyah : lots of new patches&backports (for lowmemorykiller, bcmdhd and arm related) from myfluxi’s repo (thanks to myfluxi)
    4/ From Siyah : staging: android/lowmemorykiller issues fixed
    5/ Merge from NEAK 2.0.4
    6/ Linux 3.0.31
    7/ usb: otg: merges with sztupy's usb host mode build 5 changes in his nexus s kernel
    8/ ld9040: missing gamma steps for other panel types (gokhanmoral).
    9/ Import mali changes from Siyah

    Early Version 0.11 / CWM only ICS 4.0.X ROM
    1/ From NEAK : mach-u1: tweaked touch sensitivity (thx to @ktoonsez)
    2/ Fixed issue with KALLSYMS_ALL (removed DEBUG_KERNEL)

    Early Version 0.10 / CWM only ICS 4.0.X ROM
    1/ Reverted mach-u1 from Siyah
    2/ FUSE and CUSE as modules
    3/ Merge configs with NEAK

    Early Version 0.9b / CWM only ICS 4.0.X ROM
    1/ Linux 3.0.29 from myfluxi
    2/ Linux 3.0.30 from myfluxi
    3/ CIFS as module

    Early RELEASE 0.8 / CWM only ICS 4.0.X ROM
    1/ Fix wifi toggle issue (from NEAK 2.0.3)
    2/ mdnie: Speedmod's sharpness fix
    3/ SIO number of fifo batches to 8 (instead of 1)
    4/ Merge with Siyah 3.1
    5/ Removed secondrom init files and second boot choice
    6/ Conservative settings from Ikki
    7/ First merge with NEAK 2.0.3
    8/ From NEAK dev : re-tweaked min_free_kbytes, the previous value was too big
    9/ Min default frequency is 200 MHz
    10/ /sdcard linked to internal sdcard for cm9 backward compatibility.

    Early Version 0.7 / CWM only ICS 4.0.X ROM
    1/ Fixed frequency / voltage issues with 8 steps.
    2/ Cyanogen nightly init changes (version 0.7b).

    Early Version 0.6 / CWM only ICS 4.0.X ROM
    1/ Fix adjustable vibration (myfluxi)
    2/ mDNIe: Fix adjustable color settings (myfluxi)
    3/ fix format /emmc /sdcard confusion in recovery and replace them with internal/external (gokhanmoral)
    4/ fix ntfs automounting in readonly mode for usb sticks (gokhanmoral)
    5/ image boot logo

    Early Version 0.5 / CWM only ICS 4.0.X ROM
    1/ clean customconfig through ExTweaks
    2/ new image for bootlogo
    3/ option to stop bootanimation (/data/.shun/nobootanimation)

    Early Version 0.4 / CWM only ICS 4.0.X ROM
    1/ Reverted cpu frequencies to 100-1600 MHz as SiyahKernel 3.0.1
    2/ Tried to remove boot logo...
    3/ Customboot scripts into /data/.shun

    Early Version 0.3 / CWM only ICS 4.0.X ROM
    1/ Linux 3.0.28
    2/ Payload as usual (append at the end) to reduce zImage size
    3/ Many changes of Siyah 3.1RC4 (mainly Linux 3.0.28 and BLN)

    Early Version 0.2 / CWM only ICS 4.0.X ROM
    1/ Lulzactive from Ikki 1.10
    2/ Merge settings of conservative with Ikki 1.10
    3/ Charge current for powered users with Anker battery (950 mA)

    Early Version 0.1 / CWM only ICS 4.0.X ROM
    1/ From Siyahkernel 3.0.1
    2/ Toolchain Linaro 2012.03 (gcc 4.6.3) with -Ofast
    3/ default.profile from Ikki 1.10 (except topology)
    4/ SIO + Conservative are default
    Click to expand...
    Click to collapse
    View
    10
    bgn9000
    bgn9000
    Online 2.0.10 (post 2) still ICS :rolleyes:
    I will try to get energy to finish the JB migration next week.
    View
    8
    ram3n
    ram3n
    Bonsoir,


    I've finally added your frenchy kernel in my thread.

    http://xdaforums.com/showthread.php?t=1691129&page=30

    Hope to see more incoming update, mate.

    Cheers :D

    UPDATE :

    Add CPU EXTWEAKS Settings for SHUN Andromeda 1.8
    View
    7
    bgn9000
    bgn9000
    Short break beginning

    See you in August for 2.0.7 with Linux 3.0.37 and Linaro 2012.07 and many thanks for all users of my work ;)

    Referrer Click(s)
    xdaforums.com 995
    Email Clients, IM, AIR Apps, and Direct 652
    www.galaxys2.fr 390
    www.pdamobiz.com 122
    galaxys-team.fr 82
    www.android-hilfe.de 71
    www.htcmania.com 64
    Click to expand...
    Click to collapse
    View

New posts