[KERNEL] [TW-AOKP-AOSP-CM9-CM10-PA-MIUI ] ~HydraCore v7~ Mali R3P0!
- Thread starter g.lewarne
- Start date
- Status
Start any explorer with root permissions and try to paste a file (any file) into /system folder - you must make the folder R/W first.
If you succeed, you have root. If not, your root is gone.
Sorry wat u mean "you must make the folder R/W first"? which folder? the folder i wanna paste? Folder not file? How to make it R/W? Sorry i newbie
Root hacking is an evil that destroys your root privileges. Refer to my post yesterday afternoon. Extract below for your convenience...
However, THAT'S NOT ALL, folks... I then ended up with Super SU and SuperUser installed. After some battling, I made a backup of all recent data, then reverted to last Sunday's nandoid and rerstored the data.
A plea, for us with the jittery fingers, please Gavin
Gavin, a humble request, please: The swiping up and down to select an option is very nice. However, experience has shown that the touch-CWM can cause hassles (even though not actually dangerous???). Can you please update to have the confirm via the HOME key or the Power key instead of touch anywhere on the screen, when you have some time to play?
Sorry wat u mean "you must make the folder R/W first"? which folder? the folder i wanna paste? Folder not file? How to make it R/W? Sorry i newbie
You have to make the folder you want to paste into writeable. This can be done with the explorer you want to use.
So even though there are two kernel versions. Say I want to install voltage control. Is user control over voltages and clock speeds enabled or is it just standard and oc versions that are locked down to the pre set settings?
Thanks
Sent from my GT-N7000 using Tapatalk 2
Thanks
Sent from my GT-N7000 using Tapatalk 2
In AAOKP Rom Control you can´t change voltages, so i would say they are locked.
Oh no! Last time i can change the Kingdroid build.prop file to Clearnote build.prop file. Now after pasteing the clearnote build.prop file to /system, i can't fix permission to rw,r,r!!! How? It says Permission change not successful. Please note thstsome file systems(e.g.SD card)do not allow permission changes. Does dat mean i lost root? Last time also happened once cannot fix permission but i forgot what i did then can already! Wat happen if i can't fix permission now?
Basically if you want 1.4 max go standard if you want 1.6 go oc. Gavin spent ages figuring out voltage tables for different board types and these voltages he selected are optimal and tested on a variety of devices. They are under voltaged by as much as they can be for your specific phone. Either voltage group a b or c depending on your specific hardware. Clock speeds should be controllable via apps like setcpu although there were reports these don't work on certain roms. I have no idea why you would want to change the clocks though. It's stable and brilliant as it is
Sent from my GT-N7000 using Tapatalk 2
Sorry if I missed this, but is there a place to check what the voltages are for groups a b and c? It's not showing I can change them(or what they are) , but it says I'm in group a I think.
Sent from my GT-N7000 using xda app-developers app
Sent from my GT-N7000 using xda app-developers app
I've used 4 other oc/uv tools and this one finally worked, thanks.
Sent from my GT-N7000 using xda app-developers app
Mostly just curious actually. Thanks for the replies though
Sent from my GT-N7000 using Tapatalk 2
Sent from my GT-N7000 using Tapatalk 2
Root hacking is an evil that destroys your root privileges. Refer to my post yesterday afternoon. Extract below for your convenience...
However, THAT'S NOT ALL, folks... I then ended up with Super SU and SuperUser installed. After some battling, I made a backup of all recent data, then reverted to last Sunday's nandoid and rerstored the data.
A plea, for us with the jittery fingers, please Gavin
I use root check it says i have root. But i can't install ROM! Keep showing error & the Android robot like lie down & died! Some say i have lost partial root dat's y root checker say i have root but canot install ROMs. Anyway top get back root on my Note? The SuperSU zip file u posted is for S2, can it work on Note?
Quick test of v1.5
I only want to know about MTP
Sorry I only buiilt the OC version this time
ZIP http://hecubus.com/xda/kernel/HydraCore/test/GL_NOTECORE_HYDRACORE_v1-5_OC.zip
TAR http://hecubus.com/xda/kernel/HydraCore/test/GL_NOTECORE_HYDRACORE_v1-5_OC.tar
thanks!
I only want to know about MTP
Sorry I only buiilt the OC version this time
ZIP http://hecubus.com/xda/kernel/HydraCore/test/GL_NOTECORE_HYDRACORE_v1-5_OC.zip
TAR http://hecubus.com/xda/kernel/HydraCore/test/GL_NOTECORE_HYDRACORE_v1-5_OC.tar
thanks!
Not sure if this is a normal situation, I am on 13.4 OC + RocketRom. I am using SetCPU, tried different profiles yet except deep sleep, the most used CPU level is 800 MHz. Just curious where there is any way to force the phone to use a faster MHz.
Thanks :good:
Thanks :good:
- Status
Similar threads
- Locked
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
690
Introducing HydraCore - the first kernel for all ROM types for the Galaxy Note GT-N7000 !
Q&A THREAD (click here)
Please refer to this thread only for non-development chat. Failing to do so will result in your post being removed by the moderator constantly monitoring this thread
General Features:
- Built from latest samsung Note sources
- Multiboot InitramFS for all rom types
- Patches for full functionality for all rom types
- Supports Touchwiz ICS, AOKP, AOSP, CM9 , CM10, JellyBean, ParanoidAndroid, MIUI roms
- OC/UV version and a Standard frequencies/voltages version
- Full root
- Magical elves and wizardry**
Kernel Features
- Noop scheduler default
- Tweaked OnDemand governor default
- Lots of IO tweaks
- Lots of kernel scheduler tweaks
- Adjusted all cpu voltage tables (OC kernel only)
- Realtime cpu temperature, board temperature readouts and VoltGroup information in settings>about>kernel version
- Optimised VM memory setting
- Optimised Global block readahead
- CIFS support with UTF8
- Voltages and frequencies now in userspace for Voltage Coltrol app / AOKP direct support
- lots, and lots of other tweaks (see full source)
CWM Features
- External SD card mount properly within cwm for USB Mass Storage mode / PC connection
- Select between .dep and .tar backups. TAR backups recommended!
- Fully working
THIS KERNEL HAS MMC_CAP_ERASE REMOVED AND IS FULLY SAFE FOR ALL WIPES ON ALL ROM TYPES
Kernel Installation
Install either through CWM or PC/Mobile ODIN in the usual manner. Wiping Cache and Dalvik Cache is unnecessary and wont make any difference. Flash only with 25% or more charge on the phone
Installation routine for the rom of your choice
- Either flash HydraCore or have a kernel installed with CWM
- Download your ROM of choice, follow any specific rom installation instructions (in the ROM thread OP) and flash with CWM
- Flash HydraCore in CWM or with Mobile / PC Odin
Kernel Versions
There are two versions of this kernel, one with native OC/UV and one with standard (stock) frequencies. If you are new to this kernel, flash the STD (standard) version first, as this will work with all phones.
As you become more experienced, you might want to try the OC/UV kernel, which sets the maximum CPU speed to 1600Mhz and Maximum GPU speed to 400mhz. The OC/UV kernel is undervolted, and in some circumstances can offer significant performance improvements. However, it *may* use more battery and you phone will get a little warmer.
CPU Frequencys and how they are used
Not all apps/games force the CPU to ramp up to the highest frequency (1.4 or 1.6 GHz, depending on the kernel variant you flashed). For example, while playing Temple Run, Coin Dozer and Mutant Roadkill, the CPU will mostly stay at 600 / 800 MHz. Even while playing intensive games like Pocket Legends, the CPU will stay at 600 / 800 MHz most of the time, with the CPU ramping all the way up to the maximum frequency only when very intensive graphics occur, which is like 20% of the time.
Downloads:
STANDARD Kernel (no OC)
v7 CWM Zip - http://hecubus.com/xda/kernel/HydraCore/GL_HYDRACORE_v7_STD.zip
OC/UV kernel (with overclock / undervolt)
v7 CWM Zip - http://hecubus.com/xda/kernel/HydraCore/GL_HYDRACORE_v7_OC.zip
Known Issues
- Button Backlights in TouchWiz ROMS
Setting the "Touch key light duration" to "Always Off / Always On" will not behave as such. The touch keys will light up and stay like that for up to three seconds if touched directly. Touching / unlocking the screen will not cause them to light up. On non-TouchWiz ROMs, this behavior has not been detected.
REPORTING BUGS
When reporting a bug, please provide the following information
- The ROM you are using
- The kernel version (oc / std)
- Your phones voltage group (settings > about > kernel information)
Failing to provide this information will result in your post most likely being ignored - remember we cannot help you if you cannot provide us with information we need
Other information, history and for German speakers
You can find the complete history of this kernel, with all older changelogs and news, all translated into German by our friend Atonal at this link. You will also find a complete download set of all versions of my kernels at the same place! brilliant
http://www.pocketpc.ch/showthread.php?p=1454836
Changelog
v7 Hydra Core
- Based off official CM10 kernel source, with MALI R3P0 drivers
- Included mali driver files for TW roms in ZIP kernels only
- Increased free memory for all roms, around 873mb available for the android system
- Fixed TW button lights
- Fixed TW vibration intensity
- Fixed AOSP user selectable vibration intensity
- Removed all non-standard cpu governors
v5.4 Hydra Core
- Some IO changes
- Compiler flag changes
- Switched Toolchain
- Some small fixes and changes
v5.3 HydraCore
- Dropped new source while i investigate camera
- Fixed video camera
- Fixed Microphone
- All other fixes and improvements from 5.1
v5.1 HydraCore
- Updated to latest Note 2 N7100 official kernel source, 3.0.31
- Bluetooth fixes for non TW roms
- USB fixes for non TW roms
- lots of things i cannot remember!
v4.3b HydraCore
- Fixed ROOT
v4.3 HydraCore
- USB driver changes (again!)
- Some performance improvements in initramFS
- JellyBean initialisation file changes
v4.2 HydraCore
- Fixed TW camera
- VFS Cache Pressure increased to 30
v4.1 HydraCore
- Fixed 1080p video playback for non TW roms
- Some minor memory tweak changes (vfs cache pressure 100 > 15)
- SWAP support
v4.0 HydraCore
- Reverted to kernel 3.0.15 for patch compatability and some fixes
- Completely fixed all bootanimation problems with non TW roms (uses roms own bootanimation binary now) - will fix never ending bootanimations, bootloops and long delays
- Fixed bootsound on TW roms
- Changes to initramfs, cleanup
- VM settings changed
- Some USB driver changes for better compatability
- Reverted to MDNIE from speedmod k3-9
- stuff i have forgotten
v3.5 HydraCore
- Rebuilt from scratch
- Addressed lag problems
- Voltage Control apps / AOKP built in "performance" tab now fully working
- Android logger built in (not a module any more)
- Fixed Button lights in non TW roms
- Removed all undervolting from STD kernel - now completely stock frequencies and voltages
- OC kernel min GPU now set to 267mhz @ 925mv (barely more than old kernels @ 160mhz)
- Re added all standard kernel debugging for full application support (logging is not used by the kernel but is available for apps, particurlarly debugfs)
- Updates to hardcore's k3-11 MDNIE settings
- SLQB allocator
v3.1b HydraCore
- Fixed bluetooth for TW roms
v3.1 HydraCore
- Updated to SuperSU and binary from chainfire for rooting / superuser
- Cleaned up the initramfs
- Changed bootanimation binaries (now working properly on JB)
- Compile tweaks
- Some minor fixes
v3 HydraCore
- Fixed the data corruption issue
- Reimplemented fget_light() ( fsync() )
- Fixed MTP for CM10 nightlies, and probably for everything else (with both SD cards mounted properly)
- Fixed weird bootanimation behavior
- Switched to preferred toolchain - codesourcery 2012.03
- Personally tested on TW, AOKP, CM10 preview and TW
- 1 extra magical elf per kernel
v2b HydraCore
- Fixed autorotation
v2 HydraCore
- Patchups to kernel 3.0.36
- Full USB driver patches
- Reverted to SLUB heap allocator
- Reinstated semi-touch CWM
- Better bootanimation support
- Added J4FS driver for better AOSP / CM compatability
v1 HydraCore
- First general release
Kernel Kitchen, Full Source code and GPL:
Basically i can't be bothered with GitHub so I make my entire build directory, build scripts and initramfs available in one complete package. This is compliant with the GPL licence.
You can unpack the package to any folder anywhere on your system. You will need a cross compiler toolchain installed, and set the Makefile in source/Makefile point to the cross compiler location. Codesourcery's arm-none-linux-gnueabi 2012/03 release is recommended.
Read the README-INSTRUCTIONS file, and from a root terminal, run the menu.sh script. The rest is obvious :good:
The source packages contain the following
- Kernel kitchen
- Unmodified reference source
- Modified files directory
- Working source directory
- a .patch which you can use to patch any other sources with (includes ALL changes)
- Initramfs
Kernel kitchen source package FTP directory and downloads -
http://hecubus.com/filelist.php?dir=xda/ksource
USER BANNER FOR NOTECORE KERNEL
add the following code to your signature!
Code:http://hecubus.com/xda/sig.png
Credits and thanks:
Samsung
Hardcore
Funky81
Francisco
Chainfire (for his patched CWM recovery)
entropy
HomuHomu
gokhanmoral of siyahkernel for the multiboot initramfs system and some kernel patches, including the USB driver changes
Antiochasylum
betoNL
All my friends, followers and supporters
A massive thankyou to Kelinger for providing a proper FTP file host! you da man!
A massive thankyou to Nazar78 for his special custom bootanimation support code!
A HUGE thankyou to PHJZ for making the voltage table detection patch :good:
DONATIONS
Donations are gratefully accepted but never requested!
you can make donations to me HERE
BETA TEAM ONLY
Current version - none released
DISCLAIMER
By flashing any custom kernel you understand the risks involved. As with any flash, there is always a small risk that something could go wrong and/or data loss. I am in no way responsible for any damages, loss of data, brickage, loss of work or any other loss associated with any faults due to the installation of this software.
**magical elves were harmed in the making of this kernel**88HOLY COWBAGS BATMAN !!!!
So, during my experimenting, not only have i implemented R3P0 mali drivers sucessfully
BUT IT WILL ALSO WORK FOR TW ROMS AS WELL NOW!
yeah baby yeah!
This means....im not quite gone yet, ill maintain the kernel until i get my note2 but Hydra is reborn!
There is one caveat however - i cannot distrivute the new kernel as ODIN tar's, only ZIPs as I have to replace some system files for the new mali drivers to work on all roms
ah, this was just the breakthrough i needed for my confidence
I still have some thigns to work on, and once released im no longer going to be doing daily, even weekly updates - they will be as-and-when bugs crop up that need squashing !
This was going to be my final "suprise" for you all but im too excited80i see some more arguments breaking out... this is very disappointing.
Do we really need pages and pages of "i have lag" ? i have already confirmed that I have also seen it. Do some of you think im just ignoring it?
Many of you are making comments / bug reports that often I cannot replicate and / or have not head of from many of the more "regular" members of this thread. If i cant replicate it, and it isnt reported from those people whom i know understand how this whole development thing works then im inclined to disbelieve it.
Let us not forget that all of the JellyBean builds, of any rom type are still not final, heck they arent even RC stage yet. Most of the "issues" some of you are reporting are blatantly ROM issues.
As far as "jellyCore" support - dont forget that i do not compile it from source, im just hacking up a build that Anti very kindly provides for me and sharing it. I dont make it, i dont edit it, i just modify it.
As far as my posting frequency goes, frankly, I have had enough of trying to accomodate everyone. I see the bug reports, and the ones that I can confirm and / or fix I am working on.
I cant be on XDA 24/7 to baby you all through everything, Im 31, have a full time job and a partner, and a dog. Before i was spending too much time on XDA, now im more equally balancing things out.
Frankly it pee's me off immensly seeing the endless debacle of nonsense perpetuating this thread. Thats why im ignoring it most of the time. You know last week I almost packed it in entirely seeing the never ending amount of whining, whinging and frankly disrespectul posts. I do this for free, i rarely get donations, and i spend a LOT of time on all my XDA stuff I could very easily ask mods to close this thread, and all my others and just leave, but I dont out of a sort of loyalty to some of you and the community as a whole.
Anyway, having looked at the sources for the Note2 (that was in Hydra v5 with broken video camera) I think I have found a solution and am testing now. I also think i have fixed lag issues, as well as some other things that were working suboptimally.
/RANT61YESSSSSSSSS
YESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
i have fixed TW lights! FINALLY! tested myself on stock LR6, Cleanote 6 and my own AOKP build all now works normally!
HURR bloody AAAAHHHHH
ill check out the new mali drivers, but i cant see there being any significant difference in performance - given that a diff comparison between old and new reveals minimal changes. Will look into this!
