WiFi tether on jellybean for sprint phones has been messed up for a while now.
Sent from my SPH-L710 using xda premium
- Status
WiFi tether on jellybean for sprint phones has been messed up for a while now.
Sent from my SPH-L710 using xda premium
I thought that was only for TW ROMs. I was pretty sure it wasn't an issue with anything AOSP.
release canidate 1. the first build the feel is stable enough to release as "official"
i dont know what it is, but i cannot receive any calls ... i can send out calls and texts and receive texts, but cannot receive them
i have tried on cm10 nightlies, euroskank, paranoidandroid and aokp ... every single one, after a clean install, i dont get any calls. i run ktoonz kernel at 192 min to 1512 max, governor ktoonservative, scheduler sio
ccould someone help?? ktoonz said it has to do something with the RIL within the rom....but icould just be something with me setting my min frequency too low????
any suggestions would be appreciated!
i have tried on cm10 nightlies, euroskank, paranoidandroid and aokp ... every single one, after a clean install, i dont get any calls. i run ktoonz kernel at 192 min to 1512 max, governor ktoonservative, scheduler sio
ccould someone help?? ktoonz said it has to do something with the RIL within the rom....but icould just be something with me setting my min frequency too low????
any suggestions would be appreciated!
Try running the stock CM kernel. Do a wipe, install CM, and then do a factory reset. If that doesn't work then you have a problem with your radio hardware or the baseband firmware.
What baseband are you running and did you install it?
RC already? Was the handoff fix from noobnl's experimental merged? I really want to use 4g like I did that day. Really might just go without camera.
Also, I use the tethering almost daily for my work laptop. I don't know if it's a cm10 thing or ktoonsez kernel, but I keep having to go back to a backup with that working.
These seem like fairly substantial issues I wouldn't expect to find in an RC...if I missed something or anyone had any feedback I'd appreciate it.
alright. ill do that again. i was running LJ7 and someone on ktoonz thread said he had the same problem so he went back to LIH, and so i flashed back to LIH, and i get calls sometimes, but like just now, told my mom to give me a call, didnt get anything then got a google voice notification for the voice mail she left me...
As far as I know the 4G hand off hasn't been fixed. The teathering issue seems to be more widespread than just CM10. Also, they released RC's without WiMax before, so it doesn't surprise me they would have one without working eHDRP
Sent from my SPH-L710 using xda premium
What your describing is what happened to me when I was on Google voice, check your settings on a comp. Can't remember what exactly the setting is.
Sent from my SPH-L710 using xda app-developers app
alright so i loooked at my gvoice settings, and under phones, forward calls to google chat was checked.. i unchecked that. but could that be it?
Strange...I am posting this from my tablet (which is tethered to my phone) using Google speech recognition. Running stock 11-11-2012 nightly. Are you using the stock kernel?
Last edited:
I have been noticing in the last few builds when my screen is off the home button doesn't always wake the device. Sometimes I gotta click it 3 or 4 times to get the screen to power on.
I am just doing dirty flashes. Haven't tried a clean install in awhile. Just curious if anyone is familiar with this.
Sent from my SPH-L710 using xda app-developers app
I am just doing dirty flashes. Haven't tried a clean install in awhile. Just curious if anyone is familiar with this.
Sent from my SPH-L710 using xda app-developers app
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
319CyanogenMod 10 is a free, community built distribution of Android 4.1 (Jelly Bean) which greatly extends the capabilities of your phone.
Code:#include <std_disclaimer.h> /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
This is a nightly build of CM10 for the Galaxy S3 on Sprint.. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
Please submit a patch to our Gerrit instance if you want to help out.
Install instructions:
1. Install ClockworkMod Recovery for "d2spr". Sorry, CM cannot provide support for other recoveries, although they may work fine.
2. Get the nightly build http://get.cm/?device=d2spr.
3. Reboot into recovery and install.
Do not report bug to the bug tracker if you are using this build.90TEST BUILDS (Old):
7-18-12 Build: http://d-h.st/4Kk
7-20-12 Build: http://d-h.st/PB7
7-22-12 Build: DO NOT FLASH
7-22-12 Build #2: DO NOT FLASH
7-23-12 Build: DO NOT FLASH
7-23-12 Build Stable 7AM: http://d-h.st/4zN
7-26-12 Build Stable: http://d-h.st/RzN
7-27-12 Build: DO NOT FLASH
7-29-12 Build: http://d-h.st/AyK
7-30-12 Build: http://d-h.st/l4s
7-31-12 Build: http://d-h.st/blv
8-01-12 Build: http://www.filefactory.com/file/yimrb5hd4zp/n/cm-10-20120801-UNOFFICIAL-d2spr_zip
8-08-12 Build: http://d-h.st/P7a
8-10-12 Build: http://d-h.st/Q45
8-12-12 Build: http://d-h.st/ljB
8-15-12 Build: http://d-h.st/KOL
GAPPS:
http://goo.im/gapps/gapps-jb-20120726-signed.zip
FIXES:
Restore root after flash just flash this: http://k0nane.info/rom/ecm/TeamEpic-Root-from-Recovery-v5.zip (No longer needed after 7-18-12 Build)35Known issues being worked on:
* Picasa sync doesn't work (if you overwrite the Gallery with the Google version, you'll break the camera, don't do it). We need someone to port the sync code from the old Gallery3D app!
* Camera has some focusing issues, it's next on cyanogen's list.
* All the things.
Known D2 CDMA issues being worked on:
* CDMA LTE support is broken.
Install instructions:
1. Install ClockworkMod Recovery for "d2spr". Sorry, CM cannot provide support for other recoveries, although they may work fine.
2. Get the preview build here.
3. Reboot into recovery and install.
Updates!
* Fixed unsuspend issue (DSI command timeout)
* Full overlay UI enabled
* MAJOR kernel and display update. Hardware VSYNC is enabled. Drivers still being updated by Qualcomm.
* More CM features!
* Performance rework, big interactivity boost!
* Trebuchet is back (you might lose your desktop due to the switchover)
NOTE: Don't use any other kernel with this ROM for right now unless you want a completely broken system. Kernel developers will need to sync the 300 or so patches that have recently gone in. Please don't post here if you've done it anyway.26Known common D2 devices issues being worked on:
* Picasa sync doesn't work (if you overwrite the Gallery with the Google version, you'll break the camera, don't do it). We need someone to port the sync code from the old Gallery3D app!
* All the things.
Install instructions:
1. Install ClockworkMod Recovery for "d2spr". Sorry, CM cannot provide support for other recoveries, although they may work fine.
2. Get the preview build here.
3. Reboot into recovery and install.
Updates!
* More CM stuff
* Camera fixes
* Bugfixes
* Faster graphics
