CyanogenMod 10 for Samsung Galaxy Mini 2

Search This thread
By:
Advanced…
Uizz.UW

Uizz.UW

Senior Member
Aug 16, 2012
333
348
28
Ploiesti
www.underweasel.me
Maybe this would help :

Code: 
<6>[  334.931900] request_suspend_state: sleep (0->3) at 334935579876 (2013-01-13 17:10:16.394786575 UTC)
<6>[  334.932720] early_suspend: call handlers
<6>[  334.932764] hscd_early_suspend
<6>[  334.933325] bma222_early_suspend
<3>[  334.936045] release_all_fingers start.
<3>[  334.936107] ts_power_enable off
<7>[  334.966524] LCD start lcdc_trebon_panel_off
<4>[  335.099495] [VIB] OFF
<3>[  335.116475] config_lcdc_gpio_table: gpio_tlmm_config(0x41a0)=-5
<7>[  335.116493] LCD start trebon_disp_powerdown
<6>[  335.166333] msm_fb_blank_sub panel_power_OFF

After these lines I'm getting the same thing as you .

Also , I saw some "Failed to open libwm.so" throughout the logcat . Does that library have anything to do with this ? I've read it's used for event handling .
 
R

rianrazan

Senior Member
Oct 31, 2012
51
19
I found that DSP manager only work for a while after turning on the phone, a few minutes/hour the sound effect is gone also the h/w+ decoder can't be used in mx player

Sent from my GT-S6500D using xda premium
 
Last edited:
  • Like
Reactions: DienoX
R

RoSinner

Senior Member
Sep 29, 2012
126
45
Bucharest
Hi, and thanks for the rom. After I install the rom from cwm, I rebooted and its currently sitting in that screen where it says CyanogenMod with the circle running around it. For how long does it have to stay like this cause I think its been like 10 minutes already ?
 
R

RoSinner

Senior Member
Sep 29, 2012
126
45
Bucharest
Yes, I did. Its all good now. I flashed cm10 again. took less than a minute to load this time. Was hard to get into CWM though. Kept going through the boot screens for some reason. Maybe I pressed the buttons at the wrong times. Anyway, great rom so far... no bugs encountered except the known ones.

edit : btw it wont flash with earlier CWM version. think I had 5.0.2.8 instead of 5.2.0.8 and it gave some status 7 error
 
Last edited:
F

FcukBloat

Senior Member
Jun 18, 2012
6,284
3,012
hi guys at last I can try the preveiw build by thewisp :)

sorry for the dumb question, can you let me know if the following steps are correct or if I am going to do something wrong? thanks

1. install cwm by squadzone via odin
2. wipe data/factory reset
3. flash 12.01.2013 preview rom by thewisp via cwm
4. flash gapps
5. wipe data/factory reset
6. reboot


thanks a lot in advance.

ps. the rom by thewisp comes rooted right? or should I root by myself?
 
rhisendark

rhisendark

Senior Member
Sep 17, 2012
483
91
Turkiye
Yes. It is rooted ;)
Edit: by the way there is no fm radio on cm10 :/ why? i use that on my trips :(

GT-S6500D cihazımdan Tapatalk 2 ile gönderildi
 
Last edited:
  • Like
Reactions: FcukBloat
R

RoSinner

Senior Member
Sep 29, 2012
126
45
Bucharest
Might have found a temporary solution to the incoming calls bug. I installed one of those fullscreen caller id replacement apps which kick in on top of the normal caller id screen. Seems to work fine. Screen lights up with every call.


edit : nevermind, still bugs
 
Last edited:
bhree

bhree

Member
Sep 22, 2012
49
7
I have compiled thewhisp kernel from source using my system config. Tried with my modded GB ROM and everything's working. So I think the kernel already has everything.

Sent from s6500d with custom GB ROM and kernel.
 
Last edited:
C

CoX26

Senior Member
Dec 19, 2012
231
61
TheWhisp , we are really looking foward to the call bug fix, please let us know how fixing that is going and post an update when its fixed. I really want to keep this ROM on my phone but i can't because of that call bug ...
 
F

FcukBloat

Senior Member
Jun 18, 2012
6,284
3,012
installed properly first impression is great thanks thewisp for you great work! :)

I can't believe I have jb on s6500 at last you are the best! ;)
 
tekkenl0rd13

tekkenl0rd13

Senior Member
Nov 27, 2012
604
281
I've been reading about the call black screen problem on CM10 and i've read this thread

http://xdaforums.com/showthread.php?t=1835128

and found some one flashable zip that fix proximity sensor in this thread:

http://xdaforums.com/showthread.php?t=1851816

and it seems hard to generate or produce some LOGCAT of the problem

BTW

Does anyone try to put lights near the proximity sensor while theres an incoming call?
maybe we just need some calibration to it.
 
You must log in or register to reply here.

Similar threads

T
[DEV][ICS/JB] Unofficial CyanogenMod 9/10 [10.11.2012 - ICS | 20.10.2012 - JB]
Replies
2K
Views
1M
eugeneeaster18
eugeneeaster18
T
CyanogenMod 11.0 for Samsung Galaxy Mini 2
Replies
353
Views
353K
Shadow Of Leaf
Shadow Of Leaf
tj_style
[DEV] [Samsung GT-S5570] [ROM & Kernel] Unofficial CM7.1.0 (Android 2.3.7)
Replies
4K
Views
954K
M
McHappyMeal
J
Custom ROM/Kernel for Samsung Galaxy Mini (GT-S5570)
Replies
494
Views
491K
addyhardiana
addyhardiana
rohan007
[DEV][UNOFFICIAL]STABLE Cyanogenmod 10.1[RC and nightlies]
Replies
2K
Views
691K
tsester12
tsester12

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 213
    T
    TheWhisp
    CyanogenMod 10 for Samsung Galaxy Mini 2​



    Notice:
    Because the ROM is only tested on GT-S6500D, only this variant of Mini 2 is supported by me (since I only have this variant of Mini 2).
    Functionality can be broken on other variants.

    The ROM theoretically can be installed on:

    • GT-S6500
    • GT-S6500D
    • GT-S6500L

    Notice 2:
    Uploading my files elsewhere (mirroring) is not appreciated.
    If you need to add my files somewhere else, just post the link to my goo.im account.

    Disclaimer:
    If you have decided to install this ROM on your device, TheWhisp cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences.
    By installing this ROM, you accept this rule.
    Click to expand...
    Click to collapse



    What's not working:

    * Camcorder

    Special thanks to:

    People who helps me with testing and provides logs
    Everyone who is working on CyanogenMod 10, especially the CM team itself
    KonstaT - he has done an awesome job

    Additional information / resources:

    Change logs: see 2nd post of this thread
    Google apps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
    Download (stable - milestone builds): http://goo.im/devs/thewhisp/jena-cm10

    How to install:

    1) You must have custom recovery installed on your device. I recommend ClockWorkMod: http://xdaforums.com/showthread.php?t=2156194
    2) Download ROM .zip
    3) Download Google apps
    4) Put both .zip files on your device (either internal or external storage)
    5) Boot your device into recovery mode
    6) Make nandroid backup (if needed)
    7) Wipe data/factory reset (not needed if installing above previous cm10.2 build)
    8) Format /system (only if the previous ROM is CM 10/10.1)
    9) Install the ROM .zip file
    10) Mount /system, install Google apps
    11) Done.


    Bug reporting:

    https://github.com/TheWhisp/android_device_samsung_msm7x27a-common/issues?state=open

    1) Visit the above link
    2) Click on "New issue"
    3) Enter title that explains the problem
    4) Explain your problem very clearly with as much details as possible
    5) Attach logs and screenshots (if needed)

    Don't report a bug if it's already reported.
    Don't report a bug if you:
    1) have restored apps with Titanium Backup or similar software
    2) are using any kind of task killer
    3) are using any 3rd party tweak/hack
    Name what device you're using: jena, jenad or trebon
    Name CM version you're using: 10, 10.1, 10.2
    Use proper English, try not to make any spelling errors so I and other people can understand you correctly.
    Click to expand...
    Click to collapse

    XDA:DevDB Information
    CyanogenMod 10 for Samsung Galaxy Mini 2, a ROM for the Samsung Galaxy Mini

    Contributors
    TheWhisp
    ROM OS Version: 4.1.x Jelly Bean
    ROM Kernel: Linux 3.4.x
    Based On: CyanogenMod

    Version Information
    Status: Stable
    Current Stable Version: 20131226
    Stable Release Date: 2013-12-26

    Created 2013-10-11
    Last Updated 2013-12-26
    View
    33
    T
    TheWhisp
    I have uploaded a test build. It's untested by me at the moment (it's in the test_builds folder)

    What has changed:

    Build 10.02.2013

    * OpenGL ES 2.0 compatibility issue fixed
    * Added new Camera HAL (still needs some changes to support liboemcamera)
    * Disabled SWAP in the kernel (to exclude the possibility of bricking the device, until proper solution/cause of problem is found)
    * Added custom bluedroid (untested, but if bluedroid is the cause for BT not working, I'm on the correct path)
    * Synced with CM sources
    * Some other minor changes

    Build 24.02.2013

    * Added hardware v-sync support
    * Updated Wi-Fi firmware
    * MSM framebuffer improvement
    * Synced with CM sources
    * Ringtone loop
    * Other minor changes
    * I was not able to fully fix camera, yet :/
    * Added OMX libs from ZTE Blade 3 (since it's msm7x27a and has official ICS)

    Build 06.03.2013

    * Added OC support up to 1.26Ghz
    * Use open source libril and rild + new, simple RIL class (should fix APN problems)
    * Backported USB gadged from 3.x kernel (fixed USB tethering, MTP mode etc.)
    * Some other changes for MDP and FB
    * Cleaned up device source
    * Synced with CM sources, as always
    * Probably a lot of other changes which I have forgotten about

    reupload:

    * Fix OC
    * Fix audio routing

    Build 16.03.2013

    * Fix Bluetooth and Bluetooth tethering
    * Other changes for framebuffer and mdp in the kernel
    * Fixed APNs
    * USB mode is changed to MTP, please change it to USB mass storage in storage settings
    * Other changes

    Nightly build 14.04.2013

    * Use MTP by default (you can enable UMS in storage settings)
    * Don't enable ADB by default
    * Disable tiled rendering (for testing)
    * Use Samsung's proprietary libril and rild to enable STK functionality (also new RIL class, need to experiment what happens with APN)
    * Added VR and SIO I/O schedulers
    * Added interactivex, savagedzen and smartassv2 CPU governors
    * framebuffer and MDP improvements
    * OMX libs from official GT-S7560M ICS ROM
    * Of course, all CM updates
    * And a lot of other improvements, don't remember everything :)


    Build 29.06.2013

    * Includes all device specific changes that are in CM10.1 build (yes, also partially working camera) See CM10.1 thread.
    * Improve Bluetooth
    * Improve performance


    Build 20.07.2013

    * Includes all device specific changes that are in CM10.1 build (I didn't want to re-write the changes here)
    * Camcorder is not currently working
    View
    23
    T
    TheWhisp
    camera should work in next release. I just remembered a fix we used on Mini to fix liboemcamera crash :)
    View
    22
    T
    TheWhisp
    new build soon with HW v-sync and possibly working camera :) And some other minor changes. After this build, I will start working on CM10.1 (Android 4.2.2).
    View
    21
    T
    TheWhisp
    Wi-Fi is fixed on CM10 and, as promised, I will upload CM10 preview build in a few hours. ;)
    View

New posts