Now for the V88HD (do not use for V88/V88S) an selinux-kernel bob #109 preempt 28.05.2014.
This kernel should boot the KitKat v3.x builds.
- Oma -
This kernel should boot the KitKat v3.x builds.
- Oma -
This was the question:
Can you pls test the build: http://crewrktablets.arctablet.com/?wpfb_dl=1689
and change the boot.img: http://crewrktablets.arctablet.com/?wpfb_dl=1779
- Oma -
I will keep an eye on this.
Wifi in KK is a pain. Actually we need to implement the wifi-driver into the kernel to make our Iron Omni build work ...
http://www.arctablet.com/blog/forum...-omnirom-4-4-2-custom-root-firmware-20140530/
- Oma -
FIRMWARE_VER:4.4.2
MACHINE_MODEL:U8
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3066
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:board.ap_mdm=1 board.ap_has_alsa=0 board.ap_multi_card=0 board.ap_data_only=1 console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00006000@0x0000a000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00400000@0x00080000(userdata),0x00002000@0x00480000(metadata),0x00002000@0x00482000(kpanic),0x00180000@0x00484000(system), [user=2610264]@0x00[/user]604000(user)
Non of this kernel limits the CPU, which means the chip itself is limited for some reason.
- Oma -
I did and yes it didn't work with KK 2.3 even thought it's newer than KK 3.1 . Anyway I reverted to KK 3.1 and flashed the kernel successfully. But my CPU still maxes at 1.4GHz, and USB charging does not work either (even though it shows that it is charging). Kernel #153, is the same as the one that came before it. Are you sure it's the right one?
BTW I have a V88s 1st gen, maybe that is what makes the differences. Sadly I cannot charge my tablet most often than not. For two months I'm trying to fix it, but it never really works. The guy who sold it to me told me that Chuwi does not cover battery/charging faults despite the fact that it was problematic from the day it came to me.
If only chuwi was able to solder their parts better I wouldn't have to be on the hunt for weird kernels, anyway, I'm thankful that at least I'm here. If people like OMA were not to develop for our devices it would have been as good as dead for most of us. So I'm thankful towards where thanks are due.
Доброго времени суток всем. вот прошил Effire CityNight D8 4.4 (KitKat) прошивка подходит от Chuwi V88
Attached the parameter file. Flash the CWM with RKAndroidTool.
http://crewrktablets.arctablet.com/?wpfb_dl=1640
- Oma -
So I've got around to upgrade my V88 quad first gen from 2.3 to 3.1 #153 kernel. Now everything is smooth and the lag when I turn on the pad has gone. However, it's still stuck on 1.4mhz, although like what another user did, changing the minimum CPU speed to max 1.6 does make it run at full speed it's impractical to keep it permanently there for battery life.
OMA any wise words here? Thanks.
I will keep an eye on this.
Wifi in KK is a pain. Actually we need to implement the wifi-driver into the kernel to make our Iron Omni build work ...
http://www.arctablet.com/blog/forum...-omnirom-4-4-2-custom-root-firmware-20140530/
- Oma -
j) V88/V88s Stock MW Build Date 2014-01-21 - update 2 with kernel bob #397 preempt 24.01.2014
- Oma -
vido mini one zz test
IRON by CrewRKTablets OmniROM 4.4.2 v1.1
2.WIFI and Bluetooth can not be used
Thank you for feedback. The Iron build is rtl8723 wifi, so it can't work. Compiling mtk5931 wifi still fails.
- Oma -