[aospa 4.4.2 kvt49l] paranoidandroid 4.3+ GEEB [05/20]

Search This thread
By:
Advanced…
OMGMatrix

OMGMatrix

Senior Member
Apr 16, 2011
555
124
brownsmell said:
Thanks so much for the update. The updates from Houstonn are the best. Why would you change kernels, I think he knows which one to choose:)

Oh, and openvpn connect has been broken ever since 4.4 beta 1 the last version that worked with openvpn connect was 4.3 beta 7. There was a 4.4 app update from openvpn which still doesnt work.

Here is a download site since the OP link is dead.
Click to expand...
Click to collapse

The 05/20 build was the last one with Houstonn's kernel. All of the PALegacy builds use a kernel based on the gl1tch kernel, which doesn't work great on some LGOG's.
 
  • Like
Reactions: br0ok1ynb0i and brownsmell
robbyf66

robbyf66

Senior Member
Apr 27, 2010
432
197
London
OMGMatrix said:
The 05/20 build was the last one with Houstonn's kernel. All of the PALegacy builds use a kernel based on the gl1tch kernel, which doesn't work great on some LGOG's.
Click to expand...
Click to collapse
I spoke to @houstonn and his personal life is far to attractive to pay attention to these details. he just may push the updates he does have.

cross your fingers for the good mans work


Sent from my Nexus 5 using Tapatalk
 
brownsmell

brownsmell

Senior Member
Jun 21, 2011
168
29
OMGMatrix said:
The 05/20 build was the last one with Houstonn's kernel. All of the PALegacy builds use a kernel based on the gl1tch kernel, which doesn't work great on some LGOG's.
Click to expand...
Click to collapse

Do you know which LGOG work well and which do not with the built in gl1tch kernel? Some symptoms of the problems? All I noticed on my e971 is that openvpn's routing does not work at all with the 4.3 builds.

UPDATE: I re-read the thread since may 20 and there are some bugs listed. I never noticed those things on my e971 but I dont even have a sim card. I did notice the battery life is a lot worse. I am using 4.2 beta 7 right now, that is the last build with openvpn working but I doubt it is the kernel to blame.
 
Last edited:
OMGMatrix

OMGMatrix

Senior Member
Apr 16, 2011
555
124
brownsmell said:
Do you know which LGOG work well and which do not with the built in gl1tch kernel? Some symptoms of the problems? All I noticed on my e971 is that openvpn's routing does not work at all with the 4.3 builds.

UPDATE: I re-read the thread since may 20 and there are some bugs listed. I never noticed those things on my e971 but I dont even have a sim card. I did notice the battery life is a lot worse. I am using 4.2 beta 7 right now, that is the last build with openvpn working but I doubt it is the kernel to blame.
Click to expand...
Click to collapse

I'm on an e970, so that may be the difference.

I don't know specifics, but like 1/20 times when I'd wake the phone up and the touch screen wouldn't respond at all until I forced it to reboot.
 
brownsmell

brownsmell

Senior Member
Jun 21, 2011
168
29
OMGMatrix said:
I'm on an e970, so that may be the difference.

I don't know specifics, but like 1/20 times when I'd wake the phone up and the touch screen wouldn't respond at all until I forced it to reboot.
Click to expand...
Click to collapse

The e970 and e971 (rogers canada version of the e970) are the same except the e971 does not have an sd card slot. There may be a slight partition difference, I am not sure but basically they are the same hardware. I have never had the touch screen issue. Wonder what the difference is, the e971 is the more obscure and rare phone which I would guess is more likely to have issues. Phew, sounds like I got lucky on this one but I am curious why you would have that issue on the e970- maybe it is related to the sd cardslot.
 
A

awayssg

Senior Member
May 16, 2013
86
11
The camera is unstable on 4.4 version since RC1. I need close and open again several times to take pictures :(
 
J

jtsurfs

Senior Member
Jul 30, 2007
409
34
OK. Noticed some oddness with the 6/21 build of PA. The Mac address keeps changing after every reboot.

Sent from my Optimus G using xda app-developers app
 
Play!Ya

Play!Ya

Senior Member
Nov 29, 2011
174
54
Toronto
This is the best rom for Optimus G so far. My only complaint is battery drain...as soon i start using the phone the battery drains 1% every 1 or 2 minutes. Is there any workaround for this? Any other kernel maybe?
 
mong8se

mong8se

Senior Member
Nov 15, 2012
88
16
Play!Ya said:
This is the best rom for Optimus G so far. My only complaint is battery drain...as soon i start using the phone the battery drains 1% every 1 or 2 minutes. Is there any workaround for this? Any other kernel maybe?
Click to expand...
Click to collapse

Same happens to mine.

What I've done is install trickster mod, and then use it to set the governor to "intellidemand" and turn "intelliplug" on. This has helped with the battery life. There could be a better combination of kernel settings, but I haven't had time to monkey around.
 
B

big_dog1968

Member
Nov 6, 2012
42
2
Orlando
Quick Setting Tile

How do I add or remove quick settings tiles? I have searched the settings and have not found the setting. Thanks.
 
Last edited:
You must log in or register to reply here.

Similar threads

houstonn
[ROM][KRT16M] Google Android KitKat 4.4 geeb [AOSP]
Replies
1K
Views
255K
P
Poochini
P
[ROM][E970/E971/E973]LG Official Kitkat 4.4.2[stock]
Replies
413
Views
154K
R
ruslan4ik44
SnowLeopardJB
  • Locked
[ROM][4.1.2] SnowJB v1.1 [2/20/13][STOCK][DEODEX]
Replies
793
Views
117K
Toledo_JAB
Toledo_JAB
brothaedhung
[ROM][2/16][Candy5][UNOFFICIAL][AK][geeb]
Replies
555
Views
93K
R
ryupunk
brothaedhung
[ROM][Kernel][Recovery][PAC10/13][CandyKat10/13][UNOFFICIAL][AK360][TWRP2.8.1][geeb]
Replies
858
Views
84K
brothaedhung
brothaedhung

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 175
    houstonn
    houstonn
    PA+4.4+HALO+-+ABDW.png


    AOSPA 4.3+ PARANOIDANDROID
    Kitkat 4.4.2 KVT49L android-4.4.2_r2.1

    Download ROMS from DOWNLOAD HERE

    1. DOWNLOAD YOUR ROM

    2. DOWNLOAD THE LATEST PA GAPPS PACKAGE - always check/use up to date Gapps unless otherwise noted

    http://goo.gl/mYKmfL - RECOMMEND mini modular PA Gapps

    or BANKS - if having issues with PA Gapps

    Wipe Fresh Clean Install (you all know the procedure)

    3. COMPLETE CLEAN WIPE - *includes system*

    4. FLASH ROM & GAPPS

    5. WIPE CACHE & DALVIK

    5. RUN INITIAL SETUP & REBOOT

    Let boot take as much time as needed. This will help avoid boot issues.

    GIT
    GERRIT
    FAQ + HELP
    BUG TRACKER
    COMMUNITY + CHANGELOGS    ​

    Disclaimer / Warning!: I'm not responsible for any reason should you bork your phone

    Donations

    • If you want to donate, feel free to do so otherwise don't forget to hit thanks and show your appreciation for all the hard work that goes into this.

    My Github Sources
    View
    65
    houstonn
    houstonn
    Please stick to development here!!! Take all questions to Q&A thread - thanks Pony Express!!!

    RULES

    • You must read the OP & Installation Instructions before installing this ROM or posting in this thread
      If you don't like how I run this thread. Leave. You do not have to be here and you are not forced to read it. You are doing so on your own free will.
      Search before posting here. You are most likely not the only one to have the question/issue.
      Have fun in this thread. I don't mind if we have some fun, joke around, or whatever. As long as it's fun. :)
      If you're going to post here, keep it to this ROM and this ROM only (unless its fun as mentioned above). It is useless to compare to Stock ROMs, CM10 ROMS, ect...
    Please watch the 2 videos provided below before posting in this thread. thanks


    Thank g33k3r for TOT file or whoever else involved in getting it.. You can go to HIS THREAD HERE to get the official lg image..
    View
    27
    houstonn
    houstonn
    If you guys wanna try out Google Kitkat 4.4 I'll let you guys be the first... It's alittle buggy and not everything works.. main not working is WIFI but if you want to test it out to see what it's all about.. LTE will work if you go to the dialer and dial *#*#4636#*#* and set the network to LTE.. remember this is pure google aosp not custom rom.

    The WiFi issue is cause i didn't update the drivers in the kernel but I update the device tree part merged with 4.4. Didn't have time. I'll fix some more up maybe after work today.

    the ui is alitle glitch but hey what more can u ask for ....

    download rom
    download gapps


    both are at this link http://downloads.codefi.re/houstonn/kitkat

    Also I did really want to update the 4.3 roms due to 4.4 releasing. Once pa is ready for new sources I'll have a new pa with 4.4 . I don't know how long carbon will take but if it takes some time I'll update it to the most recent 4.3. I've been very busy on the G2. Its seems I'm the only one that pumps out 3 ROMs that works for 5 carriers . lol
    View
    24
    houstonn
    houstonn
    This is an paste from Harsh from his thread here
    Well, our cpu are made at some quality standards. We have 4 different quality of cpu for apq8064 from Qualcomm. so depending on which one is on your phone it selects frequency table from slow, nominal, fast and faster.
    Google kernel source have same frequency table for fast and faster. So those with faster are not getting their extra advantage :)

    You can identify you CPU chip by below command in terminal.
    adb shell dmesg | grep PVS
    It will give you some output as given example below
    Click to expand...
    Click to collapse

    Code: 
    adb shell dmesg | grep PVS
[ 0.873920] acpuclk-8064 acpuclk-8064: ACPU PVS: FAST

    And faster binned CPU has lot to do with UV, when you look as frequency table of faster, it is already preconfigured to have lower voltages than fast, and lot lower than slow binned.
    Phones with faster binned should have better battery than slower binned phone out of box without any other configuration.
    And for UV its already hardcoded and can be adjusted by System Tuner app further. And OC I am not willing to add. ( I don't think there's any gain in running our phones hotter with higher voltages by OC'ing)
    Click to expand...
    Click to collapse

    default voltages for SLOW:

    { 1, { 384000, PLL_8, 0, 2, 0x00 }, L2(0), 950000 },
    { 0, { 432000, HFPLL, 2, 0, 0x20 }, L2(6), 975000 },
    { 1, { 486000, HFPLL, 2, 0, 0x24 }, L2(6), 975000 },
    { 0, { 540000, HFPLL, 2, 0, 0x28 }, L2(6), 1000000 },
    { 1, { 594000, HFPLL, 1, 0, 0x16 }, L2(6), 1000000 },
    { 0, { 648000, HFPLL, 1, 0, 0x18 }, L2(6), 1025000 },
    { 1, { 702000, HFPLL, 1, 0, 0x1A }, L2(6), 1025000 },
    { 0, { 756000, HFPLL, 1, 0, 0x1C }, L2(6), 1075000 },
    { 1, { 810000, HFPLL, 1, 0, 0x1E }, L2(6), 1075000 },
    { 0, { 864000, HFPLL, 1, 0, 0x20 }, L2(6), 1100000 },
    { 1, { 918000, HFPLL, 1, 0, 0x22 }, L2(6), 1100000 },
    { 0, { 972000, HFPLL, 1, 0, 0x24 }, L2(6), 1125000 },
    { 1, { 1026000, HFPLL, 1, 0, 0x26 }, L2(6), 1125000 },
    { 0, { 1080000, HFPLL, 1, 0, 0x28 }, L2(15), 1175000 },
    { 1, { 1134000, HFPLL, 1, 0, 0x2A }, L2(15), 1175000 },
    { 0, { 1188000, HFPLL, 1, 0, 0x2C }, L2(15), 1200000 },
    { 1, { 1242000, HFPLL, 1, 0, 0x2E }, L2(15), 1200000 },
    { 0, { 1296000, HFPLL, 1, 0, 0x30 }, L2(15), 1225000 },
    { 1, { 1350000, HFPLL, 1, 0, 0x32 }, L2(15), 1225000 },
    { 0, { 1404000, HFPLL, 1, 0, 0x34 }, L2(15), 1237500 },
    { 1, { 1458000, HFPLL, 1, 0, 0x36 }, L2(15), 1237500 },
    { 1, { 1512000, HFPLL, 1, 0, 0x38 }, L2(15), 1250000 },

    default voltages for NORM:

    { 1, { 384000, PLL_8, 0, 2, 0x00 }, L2(0), 900000 },
    { 0, { 432000, HFPLL, 2, 0, 0x20 }, L2(6), 925000 },
    { 1, { 486000, HFPLL, 2, 0, 0x24 }, L2(6), 925000 },
    { 0, { 540000, HFPLL, 2, 0, 0x28 }, L2(6), 950000 },
    { 1, { 594000, HFPLL, 1, 0, 0x16 }, L2(6), 950000 },
    { 0, { 648000, HFPLL, 1, 0, 0x18 }, L2(6), 975000 },
    { 1, { 702000, HFPLL, 1, 0, 0x1A }, L2(6), 975000 },
    { 0, { 756000, HFPLL, 1, 0, 0x1C }, L2(6), 1025000 },
    { 1, { 810000, HFPLL, 1, 0, 0x1E }, L2(6), 1025000 },
    { 0, { 864000, HFPLL, 1, 0, 0x20 }, L2(6), 1050000 },
    { 1, { 918000, HFPLL, 1, 0, 0x22 }, L2(6), 1050000 },
    { 0, { 972000, HFPLL, 1, 0, 0x24 }, L2(6), 1075000 },
    { 1, { 1026000, HFPLL, 1, 0, 0x26 }, L2(6), 1075000 },
    { 0, { 1080000, HFPLL, 1, 0, 0x28 }, L2(15), 1125000 },
    { 1, { 1134000, HFPLL, 1, 0, 0x2A }, L2(15), 1125000 },
    { 0, { 1188000, HFPLL, 1, 0, 0x2C }, L2(15), 1150000 },
    { 1, { 1242000, HFPLL, 1, 0, 0x2E }, L2(15), 1150000 },
    { 0, { 1296000, HFPLL, 1, 0, 0x30 }, L2(15), 1175000 },
    { 1, { 1350000, HFPLL, 1, 0, 0x32 }, L2(15), 1175000 },
    { 0, { 1404000, HFPLL, 1, 0, 0x34 }, L2(15), 1187500 },
    { 1, { 1458000, HFPLL, 1, 0, 0x36 }, L2(15), 1187500 },
    { 1, { 1512000, HFPLL, 1, 0, 0x38 }, L2(15), 1200000 },

    default voltages for FAST & FASTER:

    { 1, { 384000, PLL_8, 0, 2, 0x00 }, L2(0), 850000 },
    { 0, { 432000, HFPLL, 2, 0, 0x20 }, L2(6), 875000 },
    { 1, { 486000, HFPLL, 2, 0, 0x24 }, L2(6), 875000 },
    { 0, { 540000, HFPLL, 2, 0, 0x28 }, L2(6), 900000 },
    { 1, { 594000, HFPLL, 1, 0, 0x16 }, L2(6), 900000 },
    { 0, { 648000, HFPLL, 1, 0, 0x18 }, L2(6), 925000 },
    { 1, { 702000, HFPLL, 1, 0, 0x1A }, L2(6), 925000 },
    { 0, { 756000, HFPLL, 1, 0, 0x1C }, L2(6), 975000 },
    { 1, { 810000, HFPLL, 1, 0, 0x1E }, L2(6), 975000 },
    { 0, { 864000, HFPLL, 1, 0, 0x20 }, L2(6), 1000000 },
    { 1, { 918000, HFPLL, 1, 0, 0x22 }, L2(6), 1000000 },
    { 0, { 972000, HFPLL, 1, 0, 0x24 }, L2(6), 1025000 },
    { 1, { 1026000, HFPLL, 1, 0, 0x26 }, L2(6), 1025000 },
    { 0, { 1080000, HFPLL, 1, 0, 0x28 }, L2(15), 1075000 },
    { 1, { 1134000, HFPLL, 1, 0, 0x2A }, L2(15), 1075000 },
    { 0, { 1188000, HFPLL, 1, 0, 0x2C }, L2(15), 1100000 },
    { 1, { 1242000, HFPLL, 1, 0, 0x2E }, L2(15), 1100000 },
    { 0, { 1296000, HFPLL, 1, 0, 0x30 }, L2(15), 1125000 },
    { 1, { 1350000, HFPLL, 1, 0, 0x32 }, L2(15), 1125000 },
    { 0, { 1404000, HFPLL, 1, 0, 0x34 }, L2(15), 1137500 },
    { 1, { 1458000, HFPLL, 1, 0, 0x36 }, L2(15), 1137500 },
    { 1, { 1512000, HFPLL, 1, 0, 0x38 }, L2(15), 1150000 },
    View
    24
    houstonn
    houstonn
    zymphad said:
    A 4.3 RootBox sounds delicious.
    Click to expand...
    Click to collapse

    I've merge most that I can already. Since we use Google's sources too and they are up to date. Cm has been hard at their sources. I'm waiting on lead dev Bajee as I don't use all of sources and some of my own mods and my separate repos. I'm waiting on his so I can sync mine with official so that we can have the least incompatibility as possible. I will continue to work on what I can and the kernel as well. Thanks for patience. It will pay off :)

    Sent from my Optimus G using Tapatalk 2
    View

New posts