Zopo Zp920 Octa Core Mtk 6752

Search This thread
By:
Advanced…
Q

[QS]

Senior Member
Jun 28, 2011
64
19
@T-Bolt
Didn't have issues with focusing yet, what build are you running? Mine focuses quite fast and snaps even faster...
@Levered
Can't find it anywhere on the phone / sdcard - it appears that Zopo updater erases ota zip after successful update - i didn't know that so i went straight to update when i was prompted. :( I'm currently running build ZP920 20150203 and i don't have camera like the one on the flyer...
@electron45
1) yes, rear camera is F/2.2 here too, i'm assuming i'll find same as you if i shoot few with front :/
2) should get better with few charge cycles, it usually does with chinese batteries (theese are rarely conditioned prior to shipping), i'll try your trick and report my finding but on an average day i get same battery use for cell standby and wifi, what is indeed a wee bit troubling...
 
Levered

Levered

Inactive Recognized Contributor
Feb 11, 2012
2,401
2,240
Malaysia
levered.webs.com
[QS] said:
@T-Bolt
Didn't have issues with focusing yet, what build are you running? Mine focuses quite fast and snaps even faster...
@Levered
Can't find it anywhere on the phone / sdcard - it appears that Zopo updater erases ota zip after successful update - i didn't know that so i went straight to update when i was prompted. :( I'm currently running build ZP920 20150203 and i don't have camera like the one on the flyer...
@electron45
1) yes, rear camera is F/2.2 here too, i'm assuming i'll find same as you if i shoot few with front :/
2) should get better with few charge cycles, it usually does with chinese batteries (theese are rarely conditioned prior to shipping), i'll try your trick and report my finding but on an average day i get same battery use for cell standby and wifi, what is indeed a wee bit troubling...
Click to expand...
Click to collapse

Magic shot i think
 
T

T-Bolt40

New member
Feb 13, 2015
4
1
Hi
@ [QS] : I confirm I'm on Build ZP920 20150203.
@ Levered : I don't know how to pick up the app to send it .:(

And in general , my battery works quiet fine , the last discharge was at 07h00 AM and at this time(6h00 PM) i have 75%
My use in the day was 30 min Bluetoooth Music in my car this morning , check of SMS and Mail twice , Few minutes on FB and at least 45 min of Icoyote and music back to home..

For the main Camera , I think I will send back the phone for this problem of Focus.
The GPS works perfectly with fix in 3 seconds..;)
 
Q

[QS]

Senior Member
Jun 28, 2011
64
19
@Levered

There you go buddy, hope it works for you: http://goo.gl/7RWhMi

N.B. Since I haven't rooted my 920 yet, I used Apk Extractor app from Play store. For me apk works but I'm not sure it will work for everyone (if Magic Shot has dependencies, etc...)

WARNING: VirusTotal thinks it's a adware/riskware so proceed with caution - I've frozen app on my phone (I prefer stock camera anyways)
 
Last edited:
  • Like
Reactions: Levered
Levered

Levered

Inactive Recognized Contributor
Feb 11, 2012
2,401
2,240
Malaysia
levered.webs.com
[QS] said:
@Levered

There you go buddy, hope it works for you: http://goo.gl/7RWhMi

N.B. Since I haven't rooted my 920 yet, I used Apk Extractor app from Play store. For me apk works but I'm not sure it will work for everyone (if Magic Shot has dependencies, etc...)

WARNING: VirusTotal thinks it's a adware/riskware so proceed with caution - I've frozen app on my phone (I prefer stock camera anyways)
Click to expand...
Click to collapse

Thanks..it's work on another devices
 
D

digiphotos

Senior Member
Jan 5, 2011
67
7
Bluetooth connection interrupted

Hello,

I am using the Zopo ZP920 with rooted firmware ZP920 20150203.

I use the ZP920 to connect to my bluetooth speakers (JBL Soundfly BT and Bose Soundlink II). The connection works, but after some time, it is disconnected and after about 20 seconds reconnects.

I have no clue why. I already tried an app called "Bluetooth Keepalive", but no success. I stream the music from Spotify, so the WLan is active while BT is in use.

In the MTK Engineering settings I find some parameters for bluetooth, but I am not sure if that helps. Do you know what can be done?

Is this a known bug and will be solved in future firmware releases?

Thanks for your help

Kind regards

Mario
 
Q

[QS]

Senior Member
Jun 28, 2011
64
19
@digiphotos

Hey there,

I personally haven't experienced such bug, but i've only used bluetooth paired with car system in phone mode - it worked flawlessly. Does it happen on both bluetooth speakers or just one set? Bluetooth keepalive app would help if bt connection was dropping and then staying down (because phone went to sleep), but you describe connection drop and then reconnect. How far do you keep your phone from speakers when playing? Could there be some interferrence? Since you're rooted, could you provide portion of logcat when such connection loss happens?

EDIT: Tested with my cheapo chinese MAQ PA306 bluetooth speaker - played few hours without a single hickup from stock Music capp and Google Music app. Friend is bringing JBL set later today so I'll try with his pair too...

Cheers :)
 
Last edited:
D

digiphotos

Senior Member
Jan 5, 2011
67
7
[QS] said:
@digiphotos

Hey there,

I personally haven't experienced such bug, but i've only used bluetooth paired with car system in phone mode - it worked flawlessly. Does it happen on both bluetooth speakers or just one set? Bluetooth keepalive app would help if bt connection was dropping and then staying down (because phone went to sleep), but you describe connection drop and then reconnect. How far do you keep your phone from speakers when playing? Could there be some interferrence? Since you're rooted, could you provide portion of logcat when such connection loss happens?

EDIT: Tested with my cheapo chinese MAQ PA306 bluetooth speaker - played few hours without a single hickup from stock Music capp and Google Music app. Friend is bringing JBL set later today so I'll try with his pair too...

Cheers :)
Click to expand...
Click to collapse

Hello,

it works flawlessly with my BT headset Samsung HS 3000 (telephone calls and music transmission - perfect). It happens on my Bluetooth speakers JBL Soundfly BT and Bose Soundlink II. Both speakers work perfectly with other smartphones.

The connection loss often occurs after some time. I have recorded a log in catlog and the connection interrupted after about 20 minutes and then reconnected. So the Catlog was running for 20 minutes and the TXT-file is very big (about 400 MB).

Just a few moments after the connection interruption and reconnect, I finished the catlog recording. I have zipped the file to about 19 MB and uploaded it. Unfortunately, I am not allowed to post links here, so I will write you a private message with the link.

Could you look into the log?

Thank you and kind regards
 
D

digiphotos

Senior Member
Jan 5, 2011
67
7
Log

Hello,

a friend of mine had a look at the Catlog file and found the relevant log entries. They are as follows:

03-11 07:52:02.700 D/BTIF_bt_audio_a2dp_hw( 244): [A2DP_HW] [out_standby@406]
03-11 07:52:02.700 I/BTIF_bt_a2dp_android( 244): [A2DP_HAL][ a2dp_stop@1027] is_streaming = 1
03-11 07:52:02.700 I/BTIF_bt_a2dp_android( 244): [A2DP_HAL][ a2dp_send_appi_bt_stop_request@1984] a2dp_send_appi_bt_stop_request!
03-11 07:52:02.700 I/BTIF_bt_a2dp_android( 244): [A2DP_HAL][ A2DPDATA_SendMessage@1844] msg send to server:0 msg = 504, ptr = 0xB430B488, size = 14
03-11 07:52:02.700 I/BTIF_bt_a2dp_android( 244): [A2DP_HAL][ A2DPDATA_SendMessage@1883] data send msg to to a2dp external adaptor success : 42




03-11 07:52:02.700 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_handle_message@402] msg id = 504
03-11 07:52:02.700 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_handle_appi_bt_command@565] cmd = 5
03-11 07:52:02.700 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_global_state@1033] global state = 2
03-11 07:52:02.700 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_handle_appi_bt_command@709] process stop command, global state is streaming or unknown.
03-11 07:52:02.700 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_find_dev_index@987] find device index, stream handle = 0
03-11 07:52:02.700 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_app_check_current_process_msg@370] app check current process msg, dev = 0, msg id = 522
03-11 07:52:02.700 I/ ( 3903): [A2DP_EXT] [A2DP_SendMessage@276] msg=522, ptr=0x7878C498, size=6
03-11 07:52:02.700 I/bt_ext_apis.c( 3903): btmtk_util_find_profile_msg_handler search profile_id:[1]
03-11 07:52:02.700 I/bt_ext_apis.c( 3903): [JNI] btmtk_sendmsg(cmd=522, ptr=0x7878c498, len=62)
03-11 07:52:02.700 I/bt_ext_apis.c( 3903): [JNI] send msg success : 62
03-11 07:52:02.700 I/BTIF_AV ( 3903): [A2DP_EXT] [btmtk_a2dp_ext_msg_handler@275] [BTIF_AV] a2dp ext hdl result = 0
03-11 07:52:02.700 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_get_bdaddr@2393] jni get bd address: 9e05cb,2068,9d



03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_handle_message@402] msg id = 523
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_handle_stream_suspend_cnf@1610] Stream suspend CNF result = 256
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_handle_stream_suspend_cnf@1611] Stream suspend CNF stream_handle = 0
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_find_dev_index@987] find device index, stream handle = 0
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_find_dev_index@987] find device index, stream handle = 0
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_app_set_state@355] try to set stream state = 1, dev index = 0
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_app_set_state@363] set stream = 0, state = 1
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_global_state@1033] global state = 1
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_send_msg_2_audio_module@2454] A2DPHDL_SendMessage size = 52
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_send_msg_2_audio_module@2464] data send msg to to a2dp data success, msg ID = 606
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_handle_message@541] RemotePaused cleared
03-11 07:52:02.736 I/BTIF_AV ( 3903): [A2DP_EXT] [btmtk_a2dp_ext_msg_handler@275] [BTIF_AV] a2dp ext hdl result = 3
03-11 07:52:02.736 I/ ( 3903): [A2DP_EXT] [btmtk_a2dp_get_bdaddr@2393] jni get bd address: 9e05cb,2068,9d
03-11 07:52:02.736 I/BT_UTILS( 3903): btmtk_util_convert_bdaddr2array: addr=0x9E05CB:0x9D:0x2068
03-11 07:52:02.736 I/BT_UTILS( 3903): btmtk_util_convert_bdaddr2array: addr=0x20:0x68:0x9D:0x9E:0x5:0xCB
03-11 07:52:02.736 I/BTIF_AV ( 3903): [A2DP_EXT] [btmtk_a2dp_ext_msg_handler@304] [BTIF_AV] A2DP_STATUS_CHANGE_CONNECTED
03-11 07:52:02.736 I/bt_profile_manager.c( 3903): notifyProfileStateChanged addr:[0x9E05CB:0x9D:0x2068], profile[1], old[2] ==> new[2]!
03-11 07:52:02.736 I/bt_profile_manager.c( 3903): setBusy state:Idle
03-11 07:52:02.736 I/bt_profile_manager.c( 3903): ProfileStateChangedCB
03-11 07:52:02.736 I/bt_profile_manager.c( 3903): addr:[0x9E05CB:0x9D:0x2068] isDisconnected?[No]!
03-11 07:52:02.736 D/BTIF_AV ( 3903): HAL bt_av_callbacks->connection_state_cb
03-11 07:52:02.736 I/BluetoothA2dpServiceJni( 3903): bta2dp_connection_state_callback
03-11 07:52:02.736 I/BTIF_bt_a2dp_android( 244): [A2DP_HAL][ a2dpdata_eventLoopMain@1249] [DataEventLoop] Return from select : soresckfd. res=1
03-11 07:52:02.736 I/BTIF_bt_a2dp_android( 244): [A2DP_HAL][ a2dpdata_eventLoopMain@1256] [Media DataEventLoop] Recv A2DP external msg : 606
03-11 07:52:02.737 I/BTIF_bt_a2dp_android( 244): [A2DP_HAL][ a2dpdata_eventLoopMain@1242] [DataEventLoop] Start select : sockfd=21
03-11 07:52:02.737 D/A2dpStateMachine( 3903): onConnectionStateChanged , state 2 dev [B@42b09cd0 this com.android.bluetooth.a2dp.A2dpStateMachine@42a59910
03-11 07:52:02.737 I/BTIF_CORE( 3903): out profile[1] handler!
03-11 07:52:02.737 I/BTIF_CORE( 3903): [btif_task]:Start polling!
03-11 07:52:02.737 D/A2dpStateMachine( 3903): handleMessage: E msg.what=111
03-11 07:52:02.737 D/A2dpStateMachine( 3903): processMsg: Connected
03-11 07:52:02.737 D/A2dpStateMachine( 3903): Connected process message: 111
03-11 07:52:02.737 E/A2dpStateMachine( 3903): Connection State Device: 20:68:9D:9E:05:CB bad state: 2
03-11 07:52:02.737 D/A2dpStateMachine( 3903): handleMessage: X

The phone is lying next to the bluetooth speaker (JBL SoundFly) and the connection is good. The problem occurs with the bluetooth speakers JBL SoundFly BT and Bose Soundlink II. Both speakers work flawlessly with other smartphones.

Can you identify where the error is? By the way: With the firmware version from January, the WiFi and Bluetooth always crashed after some time of inactivity (about half an hour sleep mode). I could not disable WiFi and Bluetooth any more and had to restart the phone. With the February version of the software these crashes still happen, but not very often (maybe once in three days). But this bluetooth problem is very annoying.

Thanks for you help

Kind regards
 
W

w.kuba

New member
Mar 16, 2015
4
0
Youtube FullHD

Hi!
I have a question for owners of this amazing phone :)
I got it two weeks ago and find it really awesome, but I have one little problem - YouTube doesn't want to play in 1080p. When I go to quality selection it offers only 720p. 1080p videos from files play normally :) Does anyone have this problem too, or is it just my phone? :) Thanks!
 
W

w.kuba

New member
Mar 16, 2015
4
0
Actually I can't 'cause I'm new here and obviously I can't post links 'till I have 10 posts on this forum.

But If you search for "HD Test 1080P Full HD (Avatar)", you'll find it for sure. And this video I can play in my computer in 1080p, but the phone still offers only 720p. :(
 
W

w.kuba

New member
Mar 16, 2015
4
0
I guess it can be because the phone is too new and the YT app doesn't know how to handle it correctly. But maybe I'm wrong :)
I'm thinking of writing to YouTube if they knew something about the real cause :)
 
C

cobika

Member
Oct 5, 2010
11
0
Interested in how to become a zp920 phone? I now have a thl w8, but should not be replaced due to failure digitizer.
 
You must log in or register to reply here.

Similar threads

B
[TUT]MTK Android (Sp flash tool ) tutorial
Replies
1K
Views
2M
tavoc
tavoc
ghost45
Zopo zp980
Replies
2K
Views
577K
E
emuzychenko
ghost45
New Zopo Zp 998
Replies
1K
Views
371K
D
dromaczek
ghost45
Zopo Zp810
Replies
1K
Views
321K
jivo
jivo
DR_MOOSAVI
[Tool]SP FlashTool ||MTK Android FLASHER
Replies
109
Views
667K
X
xchaoling

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 3
    ghost45
    ghost45
    Software Section​




    New firmware:
    Lollipop Android 5.1 (20150717-153831)
    http://www.4shared.com/rar/3-N-ueDVba/20150717-154446_zp920_lollipop.html

    How to have right root on zp920

    This procedure is to receive right root on STOCK official firmware


    Drivers :

    http://www.4shared.com/rar/THPrHzDxce/USB_VCOM_Driver.html

    https://www.dropbox.com/s/125r5twipmdt1wn/MT6589 drivers.zip



    Recovery Modded
    Carliv touch 3 ported for zp920
    http://d-h.st/UmxA

    Carliv CWM ported for zp920
    http://d-h.st/MQ6k

    Carliv CWM ported for zp920 (lollipop version)
    http://www.4shared.com/file/_DWX9FtQba/recovery_cwm_base_for_lollipop.html

    Remember after received the right root is not possible to apply the update of new firmwares.



    Flashtool V.5.1444
    Version Only for zp920
    http://www.4shared.com/rar/AU4kSVORce/SP_Flash_Tool_exe_Windows_v514.html


    Section setup Software:​


    Drivers Installation :

    Procedure :
    To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
    get a screen like this in the device manager of the computer

    2ln8q5i.jpg

    Once you have installed the terminal will be shown in this way (the COM port may be different)



    For those who have problems with the installation of these drivers and have had in the past a terminal mtk
    they may have a driver conflict, or even if you just do the confusion and installed it different,
    to solve, you can try to use the program
    usbdeview:
    http://www.nirsoft.net/utils/trans/usbdeview_italian.zip

    select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC
    2jb4ec5.jpg



    Installation of the Firmware:

    PROCEDURE
    1) Setup new Firmware
    download the new firmware.
    Unzip the compressed file and insert into the firmware folder:
    a) recovery modded (is necessary for receive right root)

    Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
    and hold mode 'of off without usb cable connected!
    Run Flashtool version octa-core ..... select the file, and then scatter firmware upgrade ...... NOW ONLY CONNECT USB CABLE not before!
    Wait for the end of the installation procedure of the firmware and eventually restart the phone!
    This' whole simplified procedure for installing the original firmware.
    ​
    View
    2
    ghost45
    ghost45
    New ZOPO ZP920 OCTA CORE 5,2 inches


    New thread for the new model Zp920 Octa Core Mtk 6752

    ZOPO ZP920 MT6752 Octa Core 4G LTE 802.11ac 2GB 16GB Android 4.4 Smartphone 5,2 inches

    2310323hczv5a6lh79kscx.jpg



    ​

    Everybody are Welcome!​




    MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
    More attention to the Xda-developers Rules:
    http://xdaforums.com/announcement.php?f=256
    Many thanks to "SUPER ADMIN" MR. MIKE    ​
    View
    2
    H
    howasparty
    Battery problem seems to be already solved with OTA update.
    I think that's great support from ZOPO.
    View
    2
    ghost45
    ghost45
    First image for Lollipop 5.1 on the zopo zp920

    2015-06-04.jpg



    My Preview Work:
    2015-06-04.jpg
    View
    2
    D
    doperst
    howasparty said:
    For installing OTA update, you first have to reflash original recovery.Sent from my ZP920
    Click to expand...
    Click to collapse

    No need to reflash recovery if you have root and want to install an OTA update!
    The OTA update comes as a zip inside of another zip in the adupsfota folder of the phone's microSD card.
    All you have to do is:

    1) unzip OTA update (you may need to copy it to your PC to do it), you will need the inner update.zip file only, not MD5 sum file.
    2) put this file to the root of your microSD card
    3) download and put this SuperSU update also, get it there: http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
    4) with these two files ready, reboot to recovery (either with extended reboot menu of Xposed+Gravitybox, or in a usual way, with cable connected and Vol+ pressed)
    5) install update.zip (look for it on sdcard1)
    6) immediately after (maybe with another reboot to recovery), install SuperSU update zip
    7) reboot, the phone will go through Android Apps updating procedure
    8) upon reboot, reactivate Xposed Framework if you are using it
    9) reboot
    10) go to Phone settings -> about -> OTA update, and there, try installing the OTA update, as if you had usual recovery. It WILL fail, but it will reset some OTA update flag, so that you will be able to receive further OTA updates.
    11) ready
    View

New posts