[ROM][6.01][MOB30M][11/06/2016]xTraFactory Odex xTreMe Battery You Will Love I

Increase Touch Response:

- Set all animations to developer options at 0.5 or disable it to substantially increase touch response;

To drastically increase the battery life:

The system and the kernel need some charging cycles / days of adjustment, Android finished its first installation starts to sync your phone with google server, load the images in the gallery, sync contacts and so on.
My nexus with this rom and FKU beta with power saving profile consumes with good coverage and wireless network,10% of battery with 1 hour SOT.
There are too many variables that affect the battery, cpu temperature, ambient temperature, humidity, mobile network signal, synchronization in the backgroud, applications in your device, so it would be extremely difficult to judge your consumption without knowing all these things.


How to reduce battery consumption xTraSmooth Rom.

1) CPU

To simplify the set-up of the CPU the application FKU integrates three custom profiles that allow you to automatically set all these parameters to suit your needs. However for those who wish Further, use another application or manually change these parameters I provide these simple advice.

- Undervolt, this practice serves to reduce the overall heat of exercise and consumption of the CPU.
A CPU that uses the correct current is still more stable compared to a CPU which uses the standard tables set with average values adapted to all CPUs.
Each CPU is different so you need to calculate their boards UV.
To calculate their boards UV is necessary from a global base of -25 or -50.
Working frequency by frequency by setting the same value as the minimum and maximum frequency and disabling start at boot is that the frequencies of the voltages.
Example set the frequency 300 MHz and 300 MHz as max as min, get off gradually with small steps -5mv until you find the limit, when you restart pinned the value of a piece of paper or on the notepad.
You will find the limit, now set 5/10 mv more and you will have your first value of the table UV.
Now proceed so for each frequency using a moment smartphone before you jump to conclusions.
These values can not be adapted to each kernel, but you will have to redo this procedure for each kernel. Without this you will have your tables UV ready and saved as in my case on google keep.

- Use a frequency that allows to work with a low voltage, in my case a frequency ranging from 1036 MHz (765mv) 1267 MHz (795mv)

- Hotplug limit work on Core 2, setting the use of the 4 Core when the load reaches 99%

- Touchboost on kernel using the touchboost set to values less than the maximum frequency, such as 1267 MHz maximum frequency and touchboost with values between 883 MHz and 960 MHz.

- Hi speed freq set the same frequency as the touchboost.

- Limit the GPU working frequency between 200 MHz and 320 MHz

2) Android

- Disable Geolocation

- Turn off system sounds

- Disable vibration to the touch and keyboard

- Disable adaptive brightness

- Use a brightness value between 5% and 10%

- Manually set in 2G if you are in areas with little signal and if necessary set airplane mode.

- Disable use mobile data and set 2G when using WiFi.

- Use a few applications that use push or remain active in the background, in my case use whatsapp, facebook stable, tapatalk and FKU beta.

- Do not change rom or kernel continuously will make continuous wipe system.
Android is that the kernel need a period of adaptation and some charge cycles to work properly.

- Use a few gapps to reduce app in sync automatically or disable synchronization of the app that you use in the shortest way, and that you do not need a synchronization between multiple devices in real time.
Many gapps have a web version app that saves space in SD and have less app in sync automatically.

- Deactivate Ok google hotword

- No close the app by recent, open and close the app to continued increases fuel consumption and reduces the fluidity of the system, lollipop has a system like iOS and works well with all the app open.

- Do not use task manager to free up RAM.

- Do not use the Clean master or other background task manager , plan to avoid unnecessary.

- Do not use snapdragon battery guru or similar programs that promise lower fuel consumption.

- Avoid heavy 3D games and games continuously running type clash of clans, Simpson, etc. etc.

3) Battery

- With modern lithium battery is not advisable to go below 20%

- Lithium batteries like short courses of charge, does not always pay full charges from 0 to 100, but prefer partial charges.

- 1 charge cycle means from 0 to 100 so if charge the battery from 50% to 100% will have carried out a half charge cycle.

- You can even connect the battery to charge a 10% charge, I repeat the lithium batteries do not damage unplugging and plugging the power supply but working with infeririore charge to 20%.

- Perform a complete cycle 2/3 times in 1 year from death and charge off up to 100%.

Instructions From xTraSmooth M and StocK M

-Dirty flash on you rom, the script perform an automatic wipe cache.

FOR LOLLIPOP ROM USERS IS NECESSARY START FROM ANDROID M FACTORY OR UPGRADE YOUR BOOTLOADER AND RADIO.

INSTRUCTIONS

- FLASH TWRP

- FLASH DIRECTLY MY ROM WITHOUT ADVANCED WIPE WITH ANDROID M ARE UNNECESSARY AND WITH THE WIPE YOU BREAK THE ROM INSTALLATION

- BOOT

xTra Folder

https://www.androidfilehost.com/?w=files&flid=24488

3Minit battery for xTraSmooth for info go here :

http://xdaforums.com/showthread.php?p=63357199



For download my ROM and update it over the air install :

xTraSmooth Updater Free

https://play.google.com/store/apps/details?id=com.xtrasmooth.free

xTraSmooth Updater is the best way to update your xTraSmooth ROM over the air. It is fully updated with latest Material Design and has a very clean and user-friendly UI.

Features:
★ Automatically checks for update after a user-set interval
★ Push notification when update is available
★ Automatically checks if you need a delta update or a full ROM installation
★ Reboot into recovery for manual flashing
★ Changelog for all the changes in the latest ROM version

A special thank you to those who appreciate my work and decided to contribute to the project.

First my work friend
- Prempal Singh my xTraSmooth Partner Great App Developer
- Cristiano Spada aka @CriGio Best Themes Developer and app icon designer

- Google
- Francisco Franco
- flar2
- sshafranko
- chdloc
- Team Cyanogen
- Adr990
- badboy47
- david279
- GtrCraft
- guerreromanuel