[ROM][WIP][NAND] Omni 4.4 - 26.01.2016

Search This thread

Union_Jack

Senior Member
Dec 24, 2015
359
80
Moscow
LaMuMMiA, Use the translator web page and install the ROM from this or another site.
and on "Facebook zendrokat" I give instructions on installing ))
 
  • Like
Reactions: LaMuMMiA

LaMuMMiA

Member
Mar 25, 2016
32
1
Bologna
Thank you very much in the answer but not knowing English I should at least know where to start, so I have too much confusion in my head
Do you know where I might go?
 

barbe31

Senior Member
Jul 20, 2015
168
45
Toulouse
Xiaomi Redmi Note 5 Pro
Thank you very much in the answer but not knowing English I should at least know where to start, so I have too much confusion in my head
Do you know where I might go?

1. First you get this rom Union_Jack gave the link some times ago (it's a version of Bada)
2. Flash using multiloader (keep in mind you will lose your data)
3. Then follow the instructions for the android rom you want to install

That's all
 
Last edited:

Union_Jack

Senior Member
Dec 24, 2015
359
80
Moscow
Bada - https://yadi.sk/d/YxtiFztqWmKtc password for the archive smarturkiye.com
Multiloader 5.65 - https://yadi.sk/d/-k9MOtJIYBhbh
files for flashing - https://yadi.sk/i/_gsSQEfEqXj4K Italian for the desired file CSC_V2_Hero355_TurkoCFW.csc
screenshot of multiloader - http://www.badapps.ru/uploads/posts/2015-12/1449475622_d1d732f4872dd6ba57a2d7651bf71ef8-full.jpg

Firmware through Multiloader :
Go to Download Mode (while the phone is off, hold and hold 3 buttons: "Volume down, lock button (on the side), hang up" or turn the volume up - camera - end. On the screen appears a red "Download Mode". After you saw this note, or connect the phone cable to the computer and flash the firmware files Turko CFW 10.2 that you downloaded earlier.
Open Multiloader right click - "run as administrator", put a semicolon LSI, tick "Boot Change" "Full Download". Insert the file in Multiloader simple drag - and-drop into the program window. The archive BOOT, you need to unzip archiver. In Multiloader, paste the BOOT folder and not the archive.
Press "Port Search" should appear the words "Ready [Lismore]" (possible inscription "WAVE37").
 
Last edited:
  • Like
Reactions: alispeedsport

Union_Jack

Senior Member
Dec 24, 2015
359
80
Moscow
LaMuMMiA, You need to flash Bada .
then the flash "Boot", "FOTA" , "start kernel" (rs1)
and install omni-4.4.4-20160126-wave-HOMEMADE.zip using the recovery mode instructions from the first post.
 
Last edited:
  • Like
Reactions: alispeedsport

LaMuMMiA

Member
Mar 25, 2016
32
1
Bologna
Excuse me, but do not understand anything, I have it already 'bada 2.0, could you explain from the beginning what should I do to please? :crying:
 

Union_Jack

Senior Member
Dec 24, 2015
359
80
Moscow
Excuse me, but do not understand anything, I have it already 'bada 2.0, could you explain from the beginning what should I do to please? :crying:

Sew through multiloader 5.65 - BOOTFILES, FOTA , start Kernel

Go to Download Mode (while the phone is off, hold and hold 3 buttons: "Volume down, lock button (on the side), hang up"). On the screen appears a red "Download Mode". After you saw this note, or connect the phone cable to the computer and flash the Boot file, Fota, Start Kernel that you downloaded earlier.

To flash the phone using Multiloader program, opening it: right click - "run as administrator".

Launched Multiloader, put an end LSI, tick "Boot Change" "Full Download". Insert the file in Multiloader simple drag - and-drop into the program window. The archive BOOT, you need to unzip archiver. In Multiloader, paste the BOOT folder and not the archive.

Press "Port Search" should appear the words "Ready [Lismore]" (possible inscription "WAVE37").

If you have the inscription "Lismore" does not appear - install the driver. After installing the driver, restart the computer.


Upon reboot, the phone will automatically boot in Recovery mode (hold the volume up+button end the call).

Then click Advanced -> Terminal Command -> Select -> write sh partition.sh, press Enter and wait until you will see "Partitions had been prepared".

Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot

Upon reboot, the phone will automatically boot in Recovery mode

connect the phone cable to the computer - Mount -> Enable MTP (if you see disable MTP - it is already enabled) On the PC, we see connected card and copied the zip file in there -> Unmount -> Back.

- Install ->Up A-level –> External sd card -> omni-4.4.4-20160126-wave-HOMEMADE.zip -> Swipe to Confirm Flash -> Reboot System.
 

LaMuMMiA

Member
Mar 25, 2016
32
1
Bologna
It is very difficult but I'll try ' :crying
But this is the firmware of android??? S5 Style TurkoCFW V10.2 S8530 by hero355&Frager??
 
Last edited:

LaMuMMiA

Member
Mar 25, 2016
32
1
Bologna
I'm sorry but I did not understand this your last statement.
If I do one thing and 'passion and also because' I still like the wave as a phone, I'm sorry but I thought I wanted to try to help me.
 

Union_Jack

Senior Member
Dec 24, 2015
359
80
Moscow
LaMuMMiA,
I gave you links to the files for flashing.
Screenshots of how it looks.
Detailed instruction.
You do not understand or do not want.
You have to go to repair phones and to pay there money for the firmware.
 

LaMuMMiA

Member
Mar 25, 2016
32
1
Bologna
Thanks for the help they have given me so far, but 'when you talk of money I do not think this is the real spirit of a forum.
We speak two different languages, and then 'hard to understand each other.
Thanks anyway
 

Top Liked Posts

  • There are no posts matching your filters.
  • 101
    Android Kitkat 4.4.4​

    Let’s emphasize that-- THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT’S TO COME. AND SOME THINGS DOESN’T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.



    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    KNOWN BUGS (what doesn't work):

    - Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
    With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
    - Conference Calls
    - Some problems with audio codec settings, but generally it should
    - After Recovery time to time incorrect capacity of battery
    Maybe something else, what i forgot

    SUPPORT
    You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it, use Bada or other releases.
    We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the Android, and/or other things that might be relevant.

    Please join us on IRC: some people are on #badadroid (freenode).

    NOTE: DEVELOPERS WANTED. Please contact us if you are a developer with something to contribute.
    I do heavily encourage to work together on the better, common project instead of making kang releases and demanding money for somebody else's work.
    Read as: If you think you can make something better than this by doing less and muchazo Ctrl+C Ctrl+V - you suck, go figure the rest.

    INSTALLATION


    FIRST INSTALLATION

    Bada 2.0 is required
    Warning! It will remove Bada!


    Download BOOTFILES, Kernel and FOTA for your device:
    for 8500:
    BOOTFILES https://yadi.sk/d/KhxqKyg4bP2nu
    "start" kernel https://yadi.sk/d/PhY11Rvnmq99T
    FOTA https://yadi.sk/d/OtpVoaXpfNggE
    for 8530
    BOOTFILES https://yadi.sk/d/cBPD41VEbP2od
    "start" kernel https://yadi.sk/d/xWwb8r3RmpZxK
    FOTA https://yadi.sk/d/-WnbHbFHfNgZK

    Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
    After reboot it will open android recovery
    Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
    wait before on screen you will see "Partitions had been prepared"

    if you have external SD card:
    - Back -> Back -> Back -> Mount -> Mount USB storage
    On PC you will see SD card mounted, and copy ROM there -> Unmount -> Back
    - Install -> choose zip with ROM(mount point /external_sd) -> Swipe to Confirm Flash -> Reboot System

    if you have no external SD card
    - Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
    - Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
    - Copy Zip with ROM Internal Storage -> Disable MTP -> Back
    - Install -> choose zip with rom -> Swipe to install -> wait for flashing -> Reboot system

    Enjoy OMNI!

    You can remove installation .zip from Android level by connecting through USB in MTP mode.
    TWRP Recovery mode is available using VolUp + End keys
    Every next update you can just flash .zip through CWM.

    UPDATE from OMNI older that 09.09.2014
    - Make backup in TWRP(Backup -> Select Data -> Swipe to backup)
    - Flash FOTA and "start" kernel via Multiloader
    - Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
    - wait before on screen you will see "Partitions had been prepared" -> Back -> Back -> Back
    - Mount -> Mount USB storage
    - Copy zip with Rom from PC to External SD card -> Unmount -> Back
    - Install -> choose zip with ROM -> Swipe to Confirm Flash -> Home
    - Restore backup in TWRP (Restore -> Select packge for restore -> Swipe to restore)
    - Reboot -> System

    For activation Performance and Developer Options categories in Settings you need Settings->About Phone and tap 7 times on Build number

    ROOT
    Omni is without root support from default
    To activate root flash zip via Recovery from XDA thread http://xdaforums.com/showthread.php?t=1538053


    GAPPS

    GAPPS make our ROM slowler, because also slim GAPPS take about 15-20 MB RAM permanently
    SLIM GAPPS: http://d-h.st/users/ZordanKV/?fld_id=28623#files

    HOW TO UNINSTALL
    Just reflash bada via Multiloader

    CHANGELOG:
    26.01.2016 https://yadi.sk/d/lY5ZEJc6noBVH
    - Big kernel update from https://github.com/Coldwindofnowhere/android_kernel_samsung_aries/tree/android-5.1
    Big thanks to @Coldwindofnowhere
    It enable many additional settings in Settings-Performance
    Also enabled boost for incall volume in Advanced Settings
    - Added Battery saver mode from Omni Gerrit, Experimental- not really tested
    - GPS fixes, still we have no A-GPS

    11.01.2016 https://yadi.sk/d/pTSrLBykmpVVz
    - Omni sources 11.01.2016
    - Sensors update and cleanup
    - Added Bigmem support in Advanced settings
    with default settings we have 270 mb RAM with working 720p video recording
    with Bigmem we have 283 mb RAM without working 720p video recording(as was by default in previous versions)
    with Max RAM we have 315 mb RAM and camera, video playback and torch is not working at all
    - Updated kernel with last omni changes

    RIL update 20.12.2014 https://yadi.sk/d/kvYUiq6QdWSdD
    - SMS fixes
    just flash it via TWRP

    11.12.2014 https://yadi.sk/d/80q05wvrdKW3t
    - Omni sources 11.12.2014
    - Added roaming indication
    - Re-worked SMS
    - Updated some Zram parameters
    maybe something else :)

    25.10.2014 https://yadi.sk/d/qCh-swftcJ7tg
    - Omni sources 25.10.2014
    - Moved to omni aries kernel
    - Updated audio driver
    - Updated charger driver

    09.09.2014 https://yadi.sk/d/H5lEBmQvbLiSH
    - Omni sources 09.09.2014
    - New partition layout and new installation procedure(Read carefully! Device will be wiped).
    Now you can use android without SD card
    - Compass fixed
    - Added phone reboot in case of modem crash.

    15.08.2014 https://yadi.sk/d/jKCEMrAEZkZGr
    - Omni sources 15.08.2014
    - Hopefully fixed LCD wake-up bug on wave2, thanks to Blue59 for so many tests
    - Corrected voltage for some on-board chips

    13.07.2014 https://yadi.sk/d/DoaSRX3EWY9Hk
    - Omni sources 13.07.2014
    - Fixed updater script
    - Fixed power off, thanks to Tigrouzen

    11.07.2014
    Updated FOTA links
    Changed background from white to black
    Added start of Bada - Call+End, we can use offline bada charger, in case if battery is fully empty
    Added checking kernel size on SD card, sometimes boot.img exist but it is 0mb

    04.07.2014 https://yadi.sk/d/Rw2UmkaoVxwdP - forgot to fix updater script, so please re-copy boot.img manually to SD card
    - Omni sources 04.07.2014
    - Small kernel optimizations
    - Bring back Advanced Settings (TVout, vibration intensity and etc )
    - Updated framework overlay
    - Added OmniTorch
    - Added USD OTG support (not tested), based on http://xdaforums.com/showpost.php?p=53803247&postcount=8 Thanks to Tigrouzen

    29.06.2014 https://yadi.sk/d/M0XEIgJMVTtCi
    - Initial Release

    THANKS TO

    Special thanks to Rebellos for his CM10 ROM, for his good sources and many time, what he spent for my learning
    Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox and many others.
    OMNI team for base ROM
    Pawitp, kasper_h and all other aries developers
    Paulk and Replicant project for good base for bada-modem RIL
    and many other who help us.
    31
    25.10.2014 https://yadi.sk/d/qCh-swftcJ7tg
    - Omni sources 25.10.2014
    - Moved to omni aries kernel
    - Updated audio driver
    - Updated charger driver

    Looks like charger is working correctly now :) But don't wait long battery life, because it is android :)
    Enjoy!
    19
    11.12.2014 https://yadi.sk/d/80q05wvrdKW3t
    - Omni sources 11.12.2014
    - Added roaming indication
    - Re-worked SMS
    - Updated some Zram parameters
    maybe something else
    14
    09.09.2014 https://yadi.sk/d/H5lEBmQvbLiSH
    - Omni sources 09.09.2014
    - New partition layout and new installation procedure(Read carefully installation instruction! Device will be wiped).
    Now you can use android without SD card
    - Compass fixed
    - Added phone reboot in case of modem crash.