Purify CM13 for Hlte / T-Mo / Can -- v5.0 -- Android 6.0.1_r72 - Unofficial CM13
- Thread starter mon@diac
- Start date
I want to thank everyone who supported.. I'm getting lots of messages about my decision to reconsider.. And of course, everyone who post here. I'll think again about this matter. Please forgive me for this decision.. Xda is great community but Respect is valid for everyone and everywhere.
Continue the development of this ROM. Now I'm on another ROM, but I would like to see a new update.
They deserve my respect for your work done.
Unfortunately, there are always ungrateful people who do not know what they want at all, and others to insult.
Please provide further, this is a fantastic Rome. :good:
Unfortunately, there are always ungrateful people who do not know what they want at all, and others to insult.
Please provide further, this is a fantastic Rome. :good:
Not the ROM only, but your personality is great too. You are a warm-hearted man. (Yes, he didn't only share ROMs, plus he listened and helped everybody in thread.)
We appreciate you and your jobs. You are working very well. Let us know if we can do something. :good:
We appreciate you and your jobs. You are working very well. Let us know if we can do something. :good:
@mon@diac
People Cant See Your Growth . They Interfere .
I Just Wanna Say. Keep Doin Up The Good Work. We Respect Your Time And Efforts, Hope You'll Continue
Ignore Idiots
People Cant See Your Growth . They Interfere .
I Just Wanna Say. Keep Doin Up The Good Work. We Respect Your Time And Efforts, Hope You'll Continue
Ignore Idiots
Thank you so much.. Nice to see that you understand what I'm feeling.. Really really important for me. I felt bad because just add a feature and I've seen behavior like a man does not know what he was doing. No respect to my work but after 16 minutes, I see this post on another rom thread "Thanks to all the people involved with this project".. Okay me? "No, you guy, do not know what to do. Doing unnecessary, useless things... Instead useless Purify kernel, I share my own kernel at this thread, use it.." That was a summary of my feelings. I need to be motivated again if I'll continue to development. Thank you for your understanding.
Last edited:
S
sawdoctor
Guest
Thread cleaned of OT. If you feel your thread is being hijacked or suspect a user is using other threads to promote their own work please contact me and I will deal with it. I hope you reconsider and keep your development going
Regards
Sawdoctor
I apologize for being occupied with other matters title.. And thanks for cleaning the thread. I'll pay attention to your words.
Basketbuild link is active again.. AFH link is not ready yet but I'll upload the last version again.. I'm sorry for this but I don't have any backups for previous versions.. Only last version..
Edit: AFH link has updated with last version.. DU 10.2 -Unofficial- is ready for release. But I'll test it for a while more.. Everything seems OK now... Thanks for your patience..
Last edited:
Really looking forward to what you do with the Dirty Unicorns Rom. I hope you keep us posted here. It's like Xmas every time you update your ROM, and I'm sure your new project will be no different. 
#cantWait
#cantWait
Leaked images [emoji6]
Sent from Note 3 running Purify CM13
Sent from Note 3 running Purify CM13
What's new in kernel 3.6 and 3.7 mate?
Sent from my SM-N9005 using XDA-Developers mobile app
---------- Post added at 08:21 PM ---------- Previous post was at 07:50 PM ----------
Sent from my SM-N9005 using XDA-Developers mobile app
Sent from my SM-N9005 using XDA-Developers mobile app
---------- Post added at 08:21 PM ---------- Previous post was at 07:50 PM ----------
It works when using GPS Status app. But not when using maps or other app. Anybody know why?Which rom was using? Or did you ever use ported Tw rom? If used it, you must flash stock rom first and later install Purify rom again..
Sent from my SM-N9005 using Tapatalk
Sent from my SM-N9005 using XDA-Developers mobile app
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
123IntroductionCode:
*** Disclaimer I am not responsible for any damages, loss of data or other consequences on your device that as a result of flashing this rom.
Image
Installation Instructions
ChangelogCode:[LIST] [*][B][U][I]Make a backup[/I][/U][/B] [*]Download the rom and GApps (MM-6.0) to your device [*]Boot to recovery and do a Full Wipe (exclude internal and external storage) [*]Flash Purify and GApps [*]Reboot [/LIST]
v5.0
Kernel gets massive update since last build..
Fix emergency call
Clean up device codes..
Thermal-engine updated again ... Be Cool Purify feature ... Values from bacon
Fix a few denials (Camera blobs, thermal and vold)
Remove not exists (ipv6 nodes, services, etc.. )
Power settings updated
Not needed debug feature removed than bt
Not needed bt feature removed
Tweaked bt settings
Custom audio policy
Init fixes for the latest kernel
Deleted duplicated entries and reverted some stock values in Init
Against failed to aquire lock errors, perfd directories permissions fixed
WiFi blobs updated
Blob list updated for mm blobs -- thermal engine
Init updates for power and thermal
Wifi calibration
and more .. Be sure because I cant find my log notes
Downloads
Rom:
Purify CM13 v5.0
BasketBuild
AFH
Latest Purify Kernel
BasketBuild >>> PurifyK v1.1
AFH >>> PurifyK v1.1
Folders:
BasketBuild
AFH
GApps:
Open GApps -6.0
Delta GApps -6.0
FAQ
Q: Purify is f2fs supported?
Thanks to/Credits
XDA:DevDB Information
Purify CM13, ROM for the Samsung Galaxy Note 3
Contributors
mon@diac
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Kernel Source: https://github.com/Monadiac/
Version Information
Status: Stable
Stable Release Date: 2016-03-15
Created 2016-03-15
Last Updated 2016-10-1751Hello Xda community..
experienced the thrill of being the father two days ago. My baby boy wanted to come to the Earth early 4 days. Yes, we now have a baby boy. As you can imagine, I spend a large part of my time to take care of him .. I'll release the new version in a few days.. And yeah yeah yeah!!!!!!! I'm very happy now.. [emoji1] [emoji3] [emoji6] [emoji12] [emoji16]
Sent from my SM-N9005 using Tapatalk46
Gpsone issue fixed
Init adaptation to latest kernel
And the v4.7 may not be the last build for CM 13 but I'll do less frequent builds ( for exp. will be a 3 or 4 weeks ). I'll start to work on CM 14 soon..44Hi Dear Purifiers,
I'm so sorry for delay but Babies and Ladies First And I hope You'll forgive me with v5.0 ...
v5.0
Kernel gets massive update since last build..
Fix emergency call
Clean up device codes..
Thermal-engine updated again ... Be Cool Purify feature ... Values from bacon
Fix a few denials (Camera blobs, thermal and vold)
Remove not exists (ipv6 nodes, services, etc.. )
Power settings updated
Not needed debug feature removed than bt
Not needed bt feature removed
Tweaked bt settings
Custom audio policy
Init fixes for the latest kernel
Deleted duplicated entries and reverted some stock values in Init
Against failed to aquire lock errors, perfd directories permissions fixed
WiFi blobs updated
Blob list updated for mm blobs -- thermal engine
Init updates for power and thermal
Wifi calibration
and more .. Be sure because I cant find my log notes
Edit: OP updated... Enjoy40Hi,
First I'll release the new version of DU and after that, alpha v0.4 (If my baby boy's colic spasms subside within a few days [emoji17] , may be a beta release) of the N build.. I didn't release first 3 build of alpha version to public because me and other 2 people tested them .. I work on bug fixes now.. Thanks
Sent from my SM-N9005 using Tapatalk
