[Kernel][TW][LP][I9505][Linux 3.4.113] Imperium LL Kernel v5.8 [E.O.L.] [16/12/17]

Search This thread

JASONRR

Senior Member
May 16, 2013
1,913
4,184
Elements......what are you talking about dude? Lollirom is stock samsung with some apps removed and some themes added. If you try stock hpa1 you get same performance. To make it simple so @slim80 build kernels not you or any others.

If we can port hpa1 kernel to work with s6 base roms for i9505 (aurora rom) especially i like the thermal management in stock hpa1 kernel , want the same 1:1 kernel conpatoble with the base roms said above ( wizcyan , thor rom, s6 port , note 5 port) u get the idea . I want an answer from @slim80 if it is possible , because he has the knowledge to build kernels , not opinions from users who doesn't have knowledge in development.

---------- Post added at 08:56 AM ---------- Previous post was at 08:53 AM ----------


Hahahahahahaahaha
Normally I do not respond to such posts but this time I am breaking my rules for some friendly advise.
Firstly have a little respect for fellow users and when someone gives you some feedback either you accept it or you let it go (rather than scolding back as you have been doing).
Secondly stop sticking to your point of view (whether it is right or wrong) and learn to understand what others are telling you.

I totally agree with robcore on his reply to your thread. Also I have been a big fan of slim and appreciative of his work.

Lastly if you want stock kernel then why are you requesting a custom kernel developer, and why don't you get it from Samsung firmware. If you do not know how to make WiFi work it is your fault not of others.

Now to get WiFi working on these ROM's on lollipop download an entire stock firmware and flash the following files in odin
Modem.bin
NON-HOLOS.bin
Boot.img
Next go to /system/lib/modules and replace the files from this firmware you have downloaded.
Sometimes you may need to re-flash the ROM (with a clean install) after flashing the modems therefore it is recommended to replace boot.img and the modules in the ROM before flashing.

P.S. There will not be any further replies to this post on this thread and let's keep it clean
 

heblu

Senior Member
Mar 17, 2011
1,712
622
Bucharest
You don't understand , so i don't bother explain to you.

This IS the purpose of this forum: for us who don't understand to learn from others who does. And I replied to you to help.
Also I see that you DO bother to answer. And each answer of yours is a statement about you. I read most of this forum for a long time and I can say that vast majority of S4 community is a great one made of people who DOES bother to help others, except a very few ones...
I really am sorry for others that we have to see such an arrogant attitude of yours.
PLEASE leave the thread CLEAN, this is for IMPERIUM kernel, not for stock or requests of you
 

CrazyKarl12

Senior Member
Nov 3, 2013
841
371
angry birds is for you mate . i play games that require skillz
I am sorry to tell you but you have no idea what you are talking about. You know nothing about android development.

How could you scold others without searching? I flashed Imperium Kernel which is based on stock firmware 5.0.1 with a little tweaks for more stability. And why is it working with Thor S7 which is for you running 5.0.2? Dude do some research. Your arrogance will lead you to nothingness. Adios!

Sent from my SM-A710F using Tapatalk
 

AoMine

Senior Member
Jan 15, 2014
340
70
Somewhere near
Normally I do not respond to such posts but this time I am breaking my rules for some friendly advise.
Firstly have a little respect for fellow users and when someone gives you some feedback either you accept it or you let it go (rather than scolding back as you have been doing).
Secondly stop sticking to your point of view (whether it is right or wrong) and learn to understand what others are telling you.

I totally agree with robcore on his reply to your thread. Also I have been a big fan of slim and appreciative of his work.

Lastly if you want stock kernel then why are you requesting a custom kernel developer, and why don't you get it from Samsung firmware. If you do not know how to make WiFi work it is your fault not of others.

Now to get WiFi working on these ROM's on lollipop download an entire stock firmware and flash the following files in odin
Modem.bin
NON-HOLOS.bin
Boot.img
Next go to /system/lib/modules and replace the files from this firmware you have downloaded.
Sometimes you may need to re-flash the ROM (with a clean install) after flashing the modems therefore it is recommended to replace boot.img and the modules in the ROM before flashing.

P.S. There will not be any further replies to this post on this thread and let's keep it clean
I respect u , but i dont know what you talking about ???? It was a simple question with yes or not , not about fixing wifi

---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------

I am sorry to tell you but you have no idea what you are talking about. You know nothing about android development.

How could you scold others without searching? I flashed Imperium Kernel which is based on stock firmware 5.0.1 with a little tweaks for more stability. And why is it working with Thor S7 which is for you running 5.0.2? Dude do some research. Your arrogance will lead you to nothingness. Adios!

Sent from my SM-A710F using Tapatalk
Yes is 5.0.2 hahahaha , flash aurora and all the esit build prop will be gone and you will see the android version is 5.0.2 . Dude youre the one with no knoledge
 

CrazyKarl12

Senior Member
Nov 3, 2013
841
371
I respect u , but i dont know what you talking about ???? It was a simple question with yes or not , not about fixing wifi

---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------


Yes is 5.0.2 hahahaha , flash aurora and all the esit build prop will be gone and you will see the android version is 5.0.2 . Dude youre the one with no knoledge
Meh. So hard to make someone understand who knows nothing. Not gonna sweat you dude. Goodluck with your life.

Sent from my SM-A710F using Tapatalk
 

AoMine

Senior Member
Jan 15, 2014
340
70
Somewhere near
Flash aurora kernel than post here screenshot about device , you are the one who doesent know s×××

the rom is based on G920F (S6) 5.0.2 Chinese build, with framework edited to run S6 Touchwiz 5.1.1 plus various 5.1.1

---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------

You're a geek? Explain to me why Imperium Kernel based on 5.0.1 works on Thor S7. Explain yourself SIR

Sent from my SM-A710F using Tapatalk

do what i told u and post screenshot about device , and that will enlighten youre weak mind

---------- Post added at 11:30 AM ---------- Previous post was at 11:29 AM ----------

im not a geek , why should i be one? i just know more than you because im smarter , im just a guy who finished highschool and work in security , that's all
 

CrazyKarl12

Senior Member
Nov 3, 2013
841
371
the rom is based on G920F (S6) 5.0.2 Chinese build, with framework edited to run S6 Touchwiz 5.1.1 plus various 5.1.1

---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------



do what i told u and post screenshot about device , and that will enlighten youre weak mind

---------- Post added at 11:30 AM ---------- Previous post was at 11:29 AM ----------

im not a geek , why should i be one? i just know more than you because im smarter , im just a guy who finished highschool and work in security , that's all
Do not dodge what I want you to explain. Explain why imperium kernel works on Thor rom.

Sent from my SM-A710F using Tapatalk
 

slim80

Senior Member
Mar 13, 2012
1,630
8,794
@AoMine All ROMs based on the Samsung FW running with Lollipop 5.0.1. STOP. If the dev write 5.1.1 or 7.0, it's unrealistic. If you port apps from devices with another OS, and edit the framework for them, you don't have the same OS of the ported apps.

@slim80 Hello slim! For those who love music so hard..could you integrate Boeffla Sound with archis audiophile sound profile ? It's the best of the best!!!

Thank you very much. USing ur kernel..it's awesome and battery rocking good!

Cheers!!!

I will check my friend.

Inviato dal mio LG-H815 utilizzando Tapatalk
 
@AoMine All ROMs based on the Samsung FW running with Lollipop 5.0.1. STOP. If the dev write 5.1.1 or 7.0, it's unrealistic. If you port apps from devices with another OS, and edit the framework for them, you don't have the same OS of the ported apps.



I will check my friend.

Inviato dal mio LG-H815 utilizzando Tapatalk

You can talk with Lord Boeffla from I9300 development:d.


Thank you very much!
 

robcore

Senior Member
Jul 27, 2012
919
739
Samsung Galaxy Note 3
Google Pixel XL
  • Like
Reactions: RazOne and slim80

AoMine

Senior Member
Jan 15, 2014
340
70
Somewhere near
@AoMine All ROMs based on the Samsung FW running with Lollipop 5.0.1. STOP. If the dev write 5.1.1 or 7.0, it's unrealistic. If you port apps from devices with another OS, and edit the framework for them, you don't have the same OS of the ported apps.



I will check my friend.

Inviato dal mio LG-H815 utilizzando Tapatalk
That's what im saying , it stoped at 5.0.1 thats stock , i hate when ppl who opose are wrong . Some one said aurora kernel is stock , ofc i laughed . Other one said thor rom is not 5.0.2 based s6 chinese build , some ppl thinks if they are users on xda forums they know something.

THANK YOU for you're answer @slim80 , i want to try youre kernel again, but whenever i do a antutu benchmark or when playing a heavy game like fifa16 phone shut down , this doesent happen in stock kernel hpa1. Take care man , i had a long day working and in our country the weather is very hot, don't wanna cone home and argue with users who comment wrong.
 

slim80

Senior Member
Mar 13, 2012
1,630
8,794
No problem man :) fyi if you're looking at sound stuff, I would definitely try out changing speaker right to 5 or 6 (I'm getting good results with either) instead of 7. 7 is way too distorted and I had to turn down volume just to make it listenable.
Oook
[emoji6]

Inviato dal mio LG-H815 utilizzando Tapatalk
 
  • Like
Reactions: heblu

Pho3nX

Senior Member
Jun 13, 2013
2,875
2,111
Nothing Phone 1
That's what im saying , it stoped at 5.0.1 thats stock , i hate when ppl who opose are wrong . Some one said aurora kernel is stock , ofc i laughed . Other one said thor rom is not 5.0.2 based s6 chinese build , some ppl thinks if they are users on xda forums they know something.

THANK YOU for you're answer @slim80 , i want to try youre kernel again, but whenever i do a antutu benchmark or when playing a heavy game like fifa16 phone shut down , this doesent happen in stock kernel hpa1. Take care man , i had a long day working and in our country the weather is very hot, don't wanna cone home and argue with users who comment wrong.

LOL "some ppl thinks if they are users on xda forums they know something." ... like you ;)
In the ligfe you can learn something everyday even if you think know everything. Just keep calm, be relax and enjoy the life
@slim80 how are you mate, happy to read some news ^^ :fingers-crossed:
 

stevtec86

Senior Member
Jan 28, 2012
663
62
Como
guys two days with Imperium Kerel v4.3.....smooth, stable but not battery friendly....in half day -70% of battery....I came back to 4.2

Inviato dal mio GT-I9505 utilizzando Tapatalk
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 207
    Imperium LL Kernel v5.8 FINAL
    (E.O.L.)

    This kernel is ONLY for GT-i9505 TouchWiz Lollipop 5.0.1

    imperium_kernel_bunner.jpg


    Features
    - Based on the last Samsung Lollipop source I9505XXUPQG1
    - Linux 3.4.113
    - Compiled with the last UBERTC prebuild by @DespairFactor 29/09/2017
    - QG1 initrams
    - Old bootloader support
    - FauxSound Audio/Sound Control support (drivers version 3.6)
    - Init.d support
    - Busybox v1.27.2 compiled from source by @dorimanx
    - SELinux set to "Permissive"
    - Disabled Android Logger (can be disable/enabled it with Stweaks)
    - Disabled TIMA verifications and logs
    - Disabled Knox verifications
    - Auto-Remove Knox Apps
    - Fixed write permissions on external SD card
    - Fixed screen mirroring issue
    - Added tripndroid, row, sio, sioplus, bfq, vr, zen, FIOPS and FIFO I/O scheduler
    - Added ArterActive, Barry Allen, Impulse, Optimax, Preservative, intellidemand, asswax, lionheart, smartmax, darkness, abyssplugv2, intelliactive, ondemandplus, nightmare, wheatley, alucard, conservativex, pegasusq, Intellimm, SmartassH3 and Yankactive CPU governors
    - Added Performance and Simple GPU governors
    - CPU and GPU undervolt support
    - Kexec HardBoot support (dual boot)
    - Fast Charge
    - LED controll
    - GAMMA controll
    - Vibration Intensity controll
    - TCP congestion controll
    - Intelli_thermal controll
    - DriveDroid support
    - Others fix and patch for better performance and stability


    Download
    ----------------------------------------- TW 5.0.1 -----------------------------------------
    Imperium LL Kernel v5.8

    Imperium LL Kernel v5.8 old soft touch keys
    --------------------------------------------------------------------------------------------


    My personal Kernel Cleaning Script


    GitHub:
    Sources

    Credits:
    Samsung
    Google
    @dorimanx
    @wanam
    @fanny
    @alucard_24
    @googy_anas
    @faux123
    @Yank555-lu
    @ktoonsez
    @Lord Boeffla
    @AndroidGX
    @Chainfire
    @Kryten2k35
    @arter97
    @DespairFactor

    I'M NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING.
    I WILL NOT TAKE ANY RESPONSABILITY FOR BRICKED PHONES OR LOST DATA.


    If you like my work please, offer me a beer :D


    101
    Change log:

    Imperium LL Kernel v5.8 (LL 5.0.1)
    v5.8 - 16/12/2017
    - Integrated SuperSU and Magisk uninstaller script in the Imperium Kernel zip
    - Fix bootloop with SuperSU
    - Update (sbin/)Busybox v1.27.2
    - Update Magisk Manager v5.4.0
    - Update mkbootimg
    - Security, stability and performance improvements

    v5.7 - 08/10/2017
    - Compiled with the last UBERTC prebuild toolchain 5.x by DespairFactor (29/09/2017)
    - Updated mkbootimg
    - Fixed Magisk installation issue
    - Added aroma installer
    - aroma: added ROOT choice (SuperSU, Magisk and no root)
    - Security, stability and performance improvement

    v5.6 - 07/08/2017
    - Compiled with the last UBERTC prebuild 5.x by DespairFactor (06/08/2017)
    - Massive update from the last QG1 sources
    - ARM: 8160/1: drop warning about return_address not using unwind tables
    - Fix sizeof-pointer-memaccess warning with gcc 4.8

    v5.5 - 01/08/2017
    - Security and stability improvement
    (more details in my github)

    v5.4 - 11/07/2017
    - Security and stability improvement
    (more details in my github)

    v5.3 - 19/06/2017
    - compiled with the last UBER toolchain 5.x build June 2017 by DespairFactor (matthewdalex)
    - Security, stability and performance improvement
    (more details in my github)

    v5.2-07/05/2017
    - compiled with the last UBER toolchain 5.3.x build 22 Apr 2017 by DespairFactor
    - Security, Stability and performance improvement
    (more details in my github)

    v5.1 -05/03/2017
    - compiled with the last UBER toolchain 5.3.x build 26 Frb 2017 by DespairFactor
    - dccp: fix freeing skb too early for IPV6_RECVPKTINFO
    - tcp: avoid infinite loop in tcp_splice_read()
    - BACKPORT: Bluetooth: Fix potential NULL dereference in RFCOMM bind callback

    v5.0 -16/02/2017
    - UPSTREAM: proc: make proc_fd_permission() thread-friendly
    - UPSTREAM: proc: actually make proc_fd_permission() thread-friendly
    - net: ping: Fix stack buffer overflow in ping_common_sendmsg()
    - netfilter: Change %p to %pK in debug messages
    - BACKPORT: usb: gadget: f_mbim: Change %p to %pK in debug messages
    - ASoC: msm: qdsp6v2: Change audio drivers to use %pK

    v4.9 -09/02/2017
    - fs: ext4: disable support for fallocate FALLOC_FL_PUNCH_HOLE
    - KEYS: Fix short sprintf buffer in /proc/keys show function
    - af_unix: speedup /proc/net/unix
    - HID: core: prevent out-of-bound readings
    - sg: Fix double-free when drives detach during SG_IO
    - block: fix use-after-free in sys_ioprio_get()
    - bfq-sched: Forcefully lookup entities when the cache is inconsistent
    - packet: fix race condition in packet_set_ring
    - perf: Fix race in swevent hash

    v4.8 -19/01/2017
    - Compiled with the last UBER toolchain 5.3.x build 15/01/2017 by @DespairFactor
    - Sync with the last PK2 sources
    - PK2 initramfs
    - Linux 3.4.113
    - ANDROID: trace: net: use %pK for kernel pointers
    - Updaye Busybox v1.26.2 compiled from source by @dorimanx

    v4.7 -not released
    - Fix OJ2 source code porting
    - drivers: char: random: add EXPORT_SYMBOL(get_random_int)
    - BACKPORT: FROMLIST: mm: ASLR: use get_random_long()
    - FROMLIST: mm: mmap: Add new /proc tunable for mmap_base ASLR.
    - FROMLIST: drivers: char: random: add get_random_long()
    - FROMLIST: arm: mm: support ARCH_MMAP_RND_BITS.
    - Update initramfs from the last fw PPI1 and with the last busybox v1.25.0 compiled from source by @dorimanx

    v4.6 -10/09/2016
    - HPG1 initramfs
    - ashmem: Validate ashmem memory with fops pointer
    - staging: android: ashmem: Avoid deadlock with mmap/shrink
    - security: add ioctl specific auditing to lsm_audit
    - UPSTREAM: net: Fix use after free in the recvmmsg exit path
    - fix infoleak in rtnetlink
    - UPSTREAM: ALSA: timer: Fix race among timer ioctls
    - UPSTREAM: ALSA: timer: Fix leak in events via snd_timer_user_ccallback
    - UPSTREAM: ALSA: timer: Fix leak in events via snd_timer_user_tinterrupt
    - UPSTREAM: ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMS

    v4.5 -08/08/2016
    - HPF4 initramfs
    - BACKPORT: usbnet: cleanup after bind() in probe()
    - msm: kgsl: Defer adding the mem entry to a process

    v4.4 -03/08/2016
    - PF3 initramfs
    - Many updates with the last Google patches

    v4.3 -18/06/2016
    - USB: usbfs: fix potential infoleak in devio
    - Fixed unused variable 'ret' when building the kernel with the HALL sensor disabled
    - jf: increase kernel log buffer
    - msm: kgsl: Add missing checks for alloc size and sglen
    - mnt: Fail collect_mounts when applied to unmounted mounts
    - net: wireless: bcmdhd: check privilege on priv cmd
    - net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfrom
    - KEYS: potential uninitialized variable

    v4.3 -11/05/2016
    - Linux 3.4.112
    - idr: fix a subtle bug in idr_get_next()
    - arm/configs: flo: Remove SysV IPC from kernel
    - msm: ipc_socket: fix leak of kernel memory to userspace
    - msm: smd_pkt: Avoid prematurely stashing driver info
    - scripts/dtc/libfdt: add integer overflow checks
    - Fix sizeof-pointer-memaccess warnings
    - msm: perf: Protect buffer overflow due to malicious user

    v4.1 -23/04/2016
    - Fix STweaks issue that don't apply the mods after reboot
    - Fauxsound-3.6-i9505-SpeakerFix (credits to @robcore)
    - mm: reorder can_do_mlock to fix audit denial
    - __ptrace_may_access() should not deny sub-threads
    - workqueue: make all workqueues non-reentrant
    - fuse: break infinite loop in fuse_fill_write_pages()
    - ext4: make orphan functions be no-op in no-journal mode

    v4.0 -22/04/2016
    - Updated BusyBox (compiled from source by @dorimanx. Thanks to him)
    - Fix STweaks issue
    - [PATCH] net: tcp: split ack slow/fast events from cwnd_event
    - tcp_cubic: better follow cubic curve after idle period
    - tcp: fix timing issue in CUBIC slope calculation
    - tcp_cubic: do not set epoch_start in the future

    v3.9 -13/04/2016
    - Updated Busybox v1.24.2
    - pipe: Fix buffer offset after partially failed read
    - Staging: iio: ad7606: Fix sparse endian warning
    - Revert "ARM: fix set_domain() macro"

    v3.8 -02/04/2016
    - Compiled with the last UBERTC 5.3 toolchain build 01/04/2016
    - ramfs: misc changes
    - Updated Busybox (credits to @dorimanx)
    - ARM: fix set_domain() macro

    v3.7 -22/03/2016
    - Linux 3.4.111
    - Compiled with the last UBERTC 5.3 toolchain build 03/03/2016

    v3.6 -04/03/2016
    - OL4 initramfs

    v3.5 -28/02/2016
    - ARM: 8517/1: ICST: avoid arithmetic overflow in icst_hz()
    - ARM: 8519/1: ICST: try other dividends than 1
    - scripts/bloat-o-meter: fix python3 syntax error
    - tracing: Fix freak link error caused by branch tracer
    - block: Fix format string mismatch in cfq-iosched.c
    - block: fix blk_stack_limits() regression due to lcm() change
    - ARM: 7884/1: mm: Fix ECC mem policy printk
    - binfmt_elf.c: use get_random_int() to fix entropy depleting
    - fix sysvfs symlinks
    - EVM: Use crypto_memneq() for digest comparisons
    - crypto: algif_hash - Only export and import on sockets with data
    - crypto: algif_hash - wait for crypto_ahash_init() to complete
    - crypto: af_alg - Disallow bind/setkey/... after accept(2)
    - crypto: af_alg - Fix socket double-free when accept fails
    - crypto: user - lock crypto_alg_list on alg dump
    - recordmcount: Fix endianness handling bug for nop_mcount
    - tty: Fix unsafe ldisc reference via ioctl(TIOCGETD)
    - cpufreq: cpufreq_barry_allen.c: fix MAX TOP FREQ

    v3.4 -30/01/2016
    - Compiled with the last SaberMod toolchain v5.3
    - ramfs: sync to OL3 initramfs
    - ramfs: misc changes

    v3.3 -15/01/2016
    - Updated Busybox v1.24.1
    - ARM: 8429/1: disable GCC SRA optimization

    v3.2 -14/01/2016
    - Compiled with the last SaberMod toolchains 5.2 optimized Cortex-A15 neon-vfpv4 29/11/2015
    - OJ5 initramfs
    - ramfs: Google Services battery drain fixer by Alcolawl
    - added a version with the old soft keys drivers
    - intelli_plug.c: little tweak
    - tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c
    - KEYS: Fix race between key destruction and finding a keyring by name
    - power: quickwakeup: initial driver
    - mm/slub: don't wait for high-order page allocation
    - ARM: optimize memset_io()/memcpy_fromio()/memcpy_toio()
    - ARM: alignment: correctly decode instructions in BE8 mode.
    - arm: asm: relaxed.h: defined relaxed.h
    - include: asm-generic: relaxed.h: defined relaxed.h
    - arm: atomic.h: defined relaxed atomic_read

    v3.1 -22/11/2015
    - Compiled with the last SaberMod toolchains 5.2 optimized Cortex-A15 neon-vfpv4
    - f2fs: sync to upstream
    - ramfs: fix permissions

    v3.0 -19/11/2015
    - Sync to the last OH2 and OJ2 Samsung source code
    - OJ4 initramfs

    v2.9 - 27/10/2015
    - Compiled with the last SaberMod toolchains 4.9 26/09/2015
    - Linux 3.4.110
    - OJ2 initramfs
    - DroidPatch for cdrom (credits to FrozenCow)

    v2.8 - 23/09/2015
    - Compiled with the last SaberMod toolchain 4.9 19/09/2015 optimized Cortex A15/neon-vfpv4
    - Linux 3.4.109
    - cpufreq: Return directly in __cpufreq_get if policy is NULL
    - Optimize copy_page for modern ARM platforms
    - readahead: make context readahead more conservative [credits to Wu Fengguang]
    - lib/string.c: improve strrchr()
    - Arteractive CPU gov: back to v2.0

    v2.7 - 13/09/2015
    - Compeiled with the last SaberMod toolchains 4.9 29/08/2015 optimized Cortex A15
    - OH2 initramfs
    - Cleaned code for stability issue

    v2.6 - 04/09/2015
    - Compeiled with the last SaberMod toolchains 4.9 29/08/2015
    - Compiled as "HARD-FLOAT"
    - OG1 initramfs
    - Updated F2FS drivers
    - Revert "crypto: add lz4 Cryptographic API + arm: add support for LZ4-compressed kernel"
    - arch/arm/mm/alignment.c: removed "uninitialized_var"
    - [PATCH] ARM: proc: Add Krait proc info
    - Removed Linux 3.4.108 upstream bluetouth drivers
    - Makefile: -O3 ottimization flags
    - Makefile: removed "-std=gnu89"
    - Fixed zRam issue and removed Disk Size choice
    - power: quickwakeup: initial driver
    - Added again zen_decision v2.0 [credits to @bbedward]
    - update pm-data to get this working with ArterActive CPU gov
    - mm: page_alloc and vmscan: changes from 920F G8 source
    - cfq-iosched: fix the setting of IOPS mode on SSDs

    v2.5a - 01/08/2015
    - Revert "Added zen_decision v2.0" (fix force reboot when power saving is active)

    v2.5 - 31/07/2015
    - Based on the last Samsung LL source I9505XXUHOF2
    - arm: add arm optimized memcmp
    - arm: add krait optimized strcmp
    - cpufreq: ArterActive: tweak a bit more on suspended state
    - suspend: return error when pending wakeup source is found
    - ipv4: missing sk_nulls_node_init() in ping_unhash()
    - msm: rpc: fix uninitialized union in rpc router close function
    - kernel: cgroup: fix uninitialized 'it' use
    - deconfig: enable ARCH_MSM_KRAIT
    - ramfs: prop tweaks
    - ramfs: make sure that max gpu clock is set by default to 450 MHz
    - ramfs: add IntelliPlug controll in STweaks
    - ramfs: execute init.qcom.post_boot.sh shell script directly from /system/etc folder if exists
    - ramfs: fix permissions

    v2.4 - 26/07/2015
    - Compiled with the last Linaro Toolchain 4.9.4 2015.06 by @Christopher83
    - Added ArterActive CPU GOV [credits to @arter97]
    - Added zen_decision v2.0 [credits to @bbedward]
    - ramdisk: Disable zen decision on charger
    - Revert "jf: set proper compass calibration point for vzw model"

    v2.3 - 18/07/2015
    - Compiled with the LinaroMod 4.9 Toolchains optimized krait by @hyper
    - Revert to the old STweaks v1.2 (it's better for me)
    - Added Barry Allen CPU governor
    - pipe: iovec: Fix memory corruption when retrying atomic copy as non-atomic
    - tracing: Have filter check for balanced ops
    - jf: f2fs: bring up to date with Jaegeuk's branch
    - arch/arm/vfp/vfpmodule.c: sync to cyanogen kernel
    - ARM: 7583/1: decompressor: Enable unaligned memory access for v6 and above
    - arm/lib/Makefile: sync to cyanogen kernel
    - jf: set proper compass calibration point for vzw model
    - udp: fix behavior of wrong checksums

    v2.2 - 26/06/2015
    - Linux 3.4.108
    - OF2 initramfs
    - ring-buffer-benchmark: Fix the wrong sched_priority of producer

    v2.1 - 20/06/2015
    - toolchains: back to O2 flag
    - toolchains: added "std=gnu89" flag
    - ramfs: misc changes
    - sound/soc/codecs/wm8994.c correct values
    - sound/soc/codecs/wm8960.c correct values

    v2.0 - 14/06/2015
    - Linux 3.4.107
    - EO4 initramfs
    - ARM: 7492/1: add strstr declaration for decompressors
    - build: Use softfp-float abi and correctly applied "NEON-VFPv4 For Cortex-A15 Core"
    - arch: arm: lib: optimize memcpy for Cortex-A15 [Chandler Zhang]
    - intelli_plug: build in arch/arm/mach-msm
    - crypto: add lz4 Cryptographic API + arm: add support for LZ4-compressed kernel
    - Updated BFQ I/O scheduler v7.8

    v1.9 - 07/06/2015
    - Add support to f2fs file system
    - usb: dwc3: Fix race between pm_resume and runtime_resume [myfluxi]
    - mmc: disable crc check for 30% extra performance [varunchitre15]
    - slub.c: little tweak for performance improvements [AndroidGX]
    - sched: fair: reduce preemption latency
    - sched/completion: Add lock-free checking of the blocking case [hofrat]

    v1.8 - 31/05/2015
    - OE2 initramfs
    - toolchain: multiple fixes and changes for gcc 4.9.3
    - compiler: add support for gcc 6
    - kernel FLAGS: swhitch from -03 to -0fast
    - kernel FLAGS: remove hard set of -std=gnu89 and -fno-pic and other changes
    - fs :sync.c: some tweaks for dynamic sync control
    - Stability issues

    v1.7a - 19/05/2015
    - Minor changes and bugs fixed

    v1.7 - 13/05/2015
    - Based on the last Samsung source (OD7) Lollipop
    - Added SmartASSH3 CPU GOV
    - Add Graphite Optimization
    - Enabled SHA1_ARM and SHA_ARM_NEON
    - Updated STweaks v1.73 (Thanks to B--B)
    - Various optimizations

    v1.6 - 30/04/2015
    - OD7 initramfs
    - updated gcc compilation flags
    - msm: kgsl: Fix the offset of FSYNR1 [Shubhraprakash Das]
    - Documentation: prctl/seccomp_filte
    - ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set
    - ARM: 7743/1: compressed/head.S: work around new binutils warning
    - build: Use hard-float abi
    - ARM: 8119/1: crypto: sha1: add ARM NEON implementation
    - ARM: 8120/1: crypto: sha512: add ARM NEON implementation
    - Little tweaks for row I/O scheduler
    - Little tweaks for intellidemand CPU gov
    - Other minor changes for stability issue

    v1.5 - 18/04/2015
    - Added tripndroid I/O scheduler
    - Added Impulse, Optimax and Preservative CPU governors
    - Revert "SELinux: Fix memory leak upon loading policy"
    - OC6 initrmafs
    - Enabled neon mode
    - Vaious bugs fixed for some governors
    - Little tweaks fow row I/O scheduler
    - Updated gcc compilation flags
    - Other minor changes

    v1.4 - 14/04/2015
    - [Patch] Support copying of atags in the decompressor
    - ARM: crypto: add NEON accelerated XOR implementation
    - lib: string: use glibc version [Thx faux123]
    - Added memutils optimized cortex-A15
    - Updated busybox v1.23.2
    - Udpated gcc compiler flags

    v1.3 - 27/03/2015
    - Finally removed "Security log agent" warning
    - OC3 initramfs
    - drivers/w1/w1_int.c: call put_device if device_register fails
    - slub.c: little tweak for performance improvements (AndroidGX)

    v1.2 - 22/03/2015
    - Completly removed "Security log agent" warning
    - Revert "writeback: Fix occasional slow sync"
    - leds: add LED control (fading & brightness)
    - soc: qcom: smd: Fix SMD packet sync loss issue [Arun Kumar Neelakantam]

    v1.1 - 21/03/2015
    - Removed "Security log agent" warning
    - Fixed aviable CPU governors
    - cpufreq: Avoid crash in resume on SMP without OPP
    - writeback: Fix occasional slow sync
    - SELinux: Fix memory leak upon loading policy
    - TTY: msm_smd_tty: Fix simultaneous open/close race condition

    v1.0 - 19/03/2015
    - Initial release
    - Same features that i wrote to the first post
    36
    Imperium LL Kernel v2.6 online.
    28
    Imperium LL Kernel v1.6 online.